IFIP Glossary of Terms Used in Production Control
IFIP Glossary of Terms Used in Production Control

Author: J.L. Burbidge

Publisher: Elsevier

Published: 2012-12-02

Total Pages: 124

ISBN-13: 0444596534

DOWNLOAD EBOOK

There is at present no universally accepted source giving definitions in English of the principal terms used in Production Control and in closely related areas. Most of the dictionaries and glossaries which do exist in this field fail to cover the full range of ideas which need to be considered during an intelligent discussion of the subject. Definitions given in different sources for Production Control terms differ not only in wording, but also in many cases in the concepts which they cover.The IFIP Glossary is intended to meet this perceived need, the immediate audience for the book being IFIP WG 5.7, the working group concerned with the automation of Production Management and other related subjects.The Glossary is organised in the following way: - The subject field was classified into sub-fields by Management function. - Each of these sub-fields was analysed to discover the main concepts with which it is concerned. - Terms were selected for each concept, using as far as possible terms which are already in common use. - Definitions were selected or written for each term.This approach of starting with subject classification is believed to be new in the field of production.Care has been taken to check the Glossary with the APICS dictionary (USA), and with British standards. Notes are included in Part 2 to explain the reasons for selecting a particular meaning for a term, in those cases where there are wide differences in the meanings chosen by different sources.Some consensus about the meaning of words is essential for communication. On the other hand, there is a danger that if the accepted framework of meanings is too rigid, if may hinder the future development of the discipline. It is hoped that a reasonable balance has been found between these conflicting influences. The Glossary should be useful not only to WG 5.7 members, but also to Engineers and Academics in all countries where a knowledge of English is important to industrial development.

Databases for Production Management
Databases for Production Management

Author: R. Companys

Publisher: Elsevier

Published: 2012-12-02

Total Pages: 373

ISBN-13: 0444598782

DOWNLOAD EBOOK

Dealing with many aspects of the design, implementation and operation of databases for production management systems, this book presents research that is important to all those presently concerned with the computerisation of production management.

Computer-Aided Production Management
Computer-Aided Production Management

Author: Asbjorn Rolstadas

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 393

ISBN-13: 3642733182

DOWNLOAD EBOOK

The purpose of this book is to discuss the state of the art and future trends in the field of computerized production management systems. It is composed of a number of independent papers, each presented in a chapter. Some of the widely recognized experts in the field around the world have been asked to contribute. lowe each of them my sincere gratitude for their kind cooperation. I am also grateful to Peter Falster and Jim Browne for their kind support in helping me to review topics to be covered and to select the authors. This book is a result of the professional work done in the International Federation of Information Processing Technical Committee IFIP TC5 "Com puter Applications in Technology" and especially in the Working Group WG5. 7 "Computer-Aided Production Management". This group was established in 1978 with the aim of promoting and encouraging the advancement of the field of computer systems for the production management of manufacturing, off shore, construction, electronic and similar and related industries. The scope of the work includes, but is not limited to, the following topics: 1) design and implementation of new production planning and control systems taking into account new technology and management philosophy; 2) CAPM in a CIM environment including interfaces to CAD and CAM; 3) project management and cost engineering; 4) knowledge engineering in CAPM; 5) CAPM for Flexible Manufacturing Systems (FMS) and Flexible Assembly Systems (F AS); 6) methods and concepts in CAPM; 7) economic and social implications of CAPM.

Mass Production Processes
Mass Production Processes

Author: Anil Akdogan

Publisher: BoD – Books on Demand

Published: 2020-03-11

Total Pages: 214

ISBN-13: 1838802150

DOWNLOAD EBOOK

It is always hard to set manufacturing systems to produce large quantities of standardized parts. Controlling these mass production lines needs deep knowledge, hard experience, and the required related tools as well. The use of modern methods and techniques to produce a large quantity of products within productive manufacturing processes provides improvements in manufacturing costs and product quality. In order to serve these purposes, this book aims to reflect on the advanced manufacturing systems of different alloys in production with related components and automation technologies. Additionally, it focuses on mass production processes designed according to Industry 4.0 considering different kinds of quality and improvement works in mass production systems for high productive and sustainable manufacturing. This book may be interesting to researchers, industrial employees, or any other partners who work for better quality manufacturing at any stage of the mass production processes.

Group Technology and Cellular Manufacturing
Group Technology and Cellular Manufacturing

Author: Nallan C. Suresh

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 560

ISBN-13: 1461554675

DOWNLOAD EBOOK

Group Technology and Cellular Manufacturing (GT/CM) have been widely-researched areas in the past 15 years and much progress has been made in all branches of GT/CM. Resulting from this research activity has been a proliferation of techniques for part-machine grouping, engineering data bases, expert system-based design methods for identifying part families, new analytical and simulation tools for evaluating performance of cells, new types of cell incorporating robotics and flexible automation, team-based approaches for organizing the work force and much more; however, the field lacks a careful compilation of this research and its outcomes. The editors of this book have commissioned leading researchers and implementers to prepare specific treatments of topics for their special areas of expertise in this broad-based philosophy of manufacturing. The editors have sought to be global both in coverage of topic matters and contributors. Group Technology and Cellular Manufacturing addresses the needs and interests of three groups of individuals in the manufacturing field: academic researchers, industry practitioners, and students. (1) The book provides an up-to-date perspective, incorporating the advances made in GT/CM during the past 15 years. As a natural extension to this research, it synthesizes the latest industry practices and outcomes to guide research to greater real-world relevance. (2) The book makes clear the foundations of GT/CM from the core elements of new developments which are aimed at reducing developmental and manufacturing lead times, costs, and at improving business quality and performance. (3) Finally, the book can be used as a textbook for graduate students in engineering and management for studying the field of Group Technology and Cellular Manufacturing.

Walford's Guide to Reference Material
Walford's Guide to Reference Material

Author: Albert John Walford

Publisher: London : Library Association

Published: 1994

Total Pages: 1176

ISBN-13: 9781856040440

DOWNLOAD EBOOK

Volume 2 of this guide contains descriptions of 8300 plus critically evaluated & recommended reference resources available in all formats. Organized by Universal Dewey Classification, the topics covered are those usually found in the 100s--Philosophy & Psychology, 200s--Religion, 300s--Social Sciences, & the 900s--Geography, Biography & History. This volume particularly reflects the proliferation of travel & tourist guides, & reference works on Eastern Europe & Central Asia following the collapse of communism. Over the last few years an enormous expansion has also been noted of reference works in both religion & philosophy. Volume 1 covers Science & Technology. Volume 3 covers Generalia, Languages & Literature, & the Arts. Recommended in: Choice, Reference Reviews, American Reference Books Annual.

Advances in Production Management Systems. Smart Manufacturing and Logistics Systems: Turning Ideas into Action
Advances in Production Management Systems. Smart Manufacturing and Logistics Systems: Turning Ideas into Action

Author: Duck Young Kim

Publisher: Springer Nature

Published: 2022-09-18

Total Pages: 624

ISBN-13: 3031164075

DOWNLOAD EBOOK

This two-volume set, IFIP AICT 663 and 664, constitutes the thoroughly refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2022, held in Gyeongju, South Korea in September 2022. The 139 full papers presented in these volumes were carefully reviewed and selected from a total of 153 submissions. The papers of APMS 2022 are organized into two parts. The topics of special interest in the first part included: AI & Data-driven Production Management; Smart Manufacturing & Industry 4.0; Simulation & Model-driven Production Management; Service Systems Design, Engineering & Management; Industrial Digital Transformation; Sustainable Production Management; and Digital Supply Networks. The second part included the following subjects: Development of Circular Business Solutions and Product-Service Systems through Digital Twins; “Farm-to-Fork” Production Management in Food Supply Chains; Urban Mobility and City Logistics; Digital Transformation Approaches in Production Management; Smart Supply Chain and Production in Society 5.0 Era; Service and Operations Management in the Context of Digitally-enabled Product-Service Systems; Sustainable and Digital Servitization; Manufacturing Models and Practices for Eco-Efficient, Circular and Regenerative Industrial Systems; Cognitive and Autonomous AI in Manufacturing and Supply Chains; Operators 4.0 and Human-Technology Integration in Smart Manufacturing and Logistics Environments; Cyber-Physical Systems for Smart Assembly and Logistics in Automotive Industry; and Trends, Challenges and Applications of Digital Lean Paradigm.

Walford's Guide to Reference Material: Social and historical sciences, philosophy and religion
Walford's Guide to Reference Material: Social and historical sciences, philosophy and religion

Author: Albert John Walford

Publisher: London : Library Association Publishing

Published: 1996

Total Pages: 1168

ISBN-13:

DOWNLOAD EBOOK

This new edition of Volume II (last published in 1994) has been extensively expanded and revised in all areas. Fully updated, the new edition includes major changes and covers a span of topics from archaeology through medieval history to statistics. It includes philosophy, psychology, religion, social sciences, geography, biology and history. All areas have been completely updated with additional material in economics, business and management.

Advances in Production Management Systems. Competitive Manufacturing for Innovative Products and Services
Advances in Production Management Systems. Competitive Manufacturing for Innovative Products and Services

Author: Christos Emmanouilidis

Publisher: Springer

Published: 2013-08-13

Total Pages: 752

ISBN-13: 3642403611

DOWNLOAD EBOOK

The two volumes IFIP AICT 397 and 398 constitute the thoroughly refereed post-conference proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2012, held in Rhodes, Greece, in September 2012. The 182 revised full papers were carefully reviewed and selected for inclusion in the two volumes. They are organized in 6 parts: sustainability; design, manufacturing and production management; human factors, learning and innovation; ICT and emerging technologies in production management; product and asset lifecycle management; and services, supply chains and operations.

Advances in Production Management Systems: New Challenges, New Approaches
Advances in Production Management Systems: New Challenges, New Approaches

Author: Bruno Vallespir

Publisher: Springer Science & Business Media

Published: 2010-10-15

Total Pages: 681

ISBN-13: 3642163572

DOWNLOAD EBOOK

The present economic and social environment has given rise to new situations within which companies must operate. As a first example, the globalization of the economy and the need for performance has led companies to outsource and then to operate inside networks of enterprises such as supply chains or virtual enterprises. A second instance is related to environmental issues. The statement about the impact of ind- trial activities on the environment has led companies to revise processes, to save - ergy, to optimize transportation.... A last example relates to knowledge. Knowledge is considered today to be one of the main assets of a company. How to capitalize, to manage, to reuse it for the benefit of the company is an important current issue. The three examples above have no direct links. However, each of them constitutes a challenge that companies have to face today. This book brings together the opinions of several leading researchers from all around the world. Together they try to develop new approaches and find answers to those challenges. Through the individual ch- ters of this book, the authors present their understanding of the different challenges, the concepts on which they are working, the approaches they are developing and the tools they propose. The book is composed of six parts; each one focuses on a specific theme and is subdivided into subtopics.