Handbook on Design of Piles and Drilled
Handbook on Design of Piles and Drilled

Author: Lymon Reese

Publisher:

Published: 2006-08

Total Pages: 0

ISBN-13: 9781410225603

DOWNLOAD EBOOK

This book is specifically designed as a guide to highway engineers. It was used as a textbook for the FHWA training courses on the above title. Several methods of analysis and design of piles under lateral loading are in use. Two methods are presented: the method of Broms, and the method where nonlinear soil-response curves, p-y curves, are employed. The latter method is given prominence because of its versatility. A computer program is presented for solving the equations giving pile deflection, rotation, bending moment, and shear. An iterative procedure is employed internally in the computer program because of the nonlinear response of the soil. Nondimensional curves are presented that can be used for "hand" solution of the differential equation. Nondimensional solutions are useful as a means of checking computer output and to provide insight into the nature of the problem. Several examples are solved and the material is presented in a manner to simplify necessary computations, with step-by-step procedures given where appropriate.

Handbook on Design of Piles and Drilled Shafts Under Lateral Load
Handbook on Design of Piles and Drilled Shafts Under Lateral Load

Author: Lymon C. Reese

Publisher:

Published: 1984

Total Pages: 360

ISBN-13:

DOWNLOAD EBOOK

This Handbook is specifically designed as a guide to highway engineers. It was used as a textbook for the FHWA training courses on the above title. Several methods of analysis and design of piles under lateral loading are in use. Two methods are presented: the method of Broms, and the method where nonlinear soil-response curves, p-y curves, are employed. The latter method is given prominence because of its versatility. A computer program is presented for solving the equations giving pile deflection, rotation, bending moment, and shear. An iterative procedure is employed internally in the computer program because of the nonlinear response of the soil. Nondimensional curves are presented that can be used for "hand" solution of the differential equation.

Single Piles and Pile Groups Under Lateral Loading
Single Piles and Pile Groups Under Lateral Loading

Author: Lymon C. Reese

Publisher: CRC Press

Published: 2010-12-15

Total Pages: 529

ISBN-13: 1439894302

DOWNLOAD EBOOK

The complexities of designing piles for lateral loads are manifold as there are many forces that are critical to the design of big structures such as bridges, offshore and waterfront structures and retaining walls. The loads on structures should be supported either horizontally or laterally or in both directions and most structures have in common t

Rock-socketed Shafts for Highway Structure Foundations
Rock-socketed Shafts for Highway Structure Foundations

Author: John P. Turner

Publisher: Transportation Research Board

Published: 2006

Total Pages: 145

ISBN-13: 0309097681

DOWNLOAD EBOOK

TRB's National Cooperative Highway Research Program (NCHRP) Synthesis 360: Rock-Socketed Shafts for Highway Structure Foundations explores current practices pertaining to each step of the design process, along with the limitations; identifies emerging and promising technologies; examines the principal challenges in advancing the state of the practice; and investigates future developments and potential improvements in the use and design of rock-socketed shafts.

Foundation Engineering Handbook
Foundation Engineering Handbook

Author: Hsai-Yang Fang

Publisher: Springer Science & Business Media

Published: 2013-06-29

Total Pages: 935

ISBN-13: 1475752717

DOWNLOAD EBOOK

More than ten years have passed since the first edition was published. During that period there have been a substantial number of changes in geotechnical engineering, especially in the applications of foundation engineering. As the world population increases, more land is needed and many soil deposits previously deemed unsuitable for residential housing or other construction projects are now being used. Such areas include problematic soil regions, mining subsidence areas, and sanitary landfills. To overcome the problems associated with these natural or man-made soil deposits, new and improved methods of analysis, design, and implementation are needed in foundation construction. As society develops and living standards rise, tall buildings, transportation facilities, and industrial complexes are increasingly being built. Because of the heavy design loads and the complicated environments, the traditional design concepts, construction materials, methods, and equipment also need improvement. Further, recent energy and material shortages have caused additional burdens on the engineering profession and brought about the need to seek alternative or cost-saving methods for foundation design and construction.

Drilled Shafts
Drilled Shafts

Author: National Highway Institute (U.S.)

Publisher:

Published: 1988

Total Pages: 608

ISBN-13:

DOWNLOAD EBOOK

This document was written as a resource for participants in a short course covering the topic of construction and design of drilled shaft foundations for bridges and other structures. It is the second edition of a Federal Highway Administration workbook on construction and design of drilled shafts. The first edition was written in 1988 (FHWA-SA-HI-88-042). While introductory material from the 1988 edition was retained, the emphasis in this document is on providing relatively comprehensive information for engineers who already have some experience with drilled shaft construction and/or design. The initial chapters cover an overview of the characteristics of drilled shafts, site investigations for drilled shafts (to collect information for both construction and design), and details of drilled shaft construction. These chapters are followed by several chapters on the design of drilled shafts in soil and rock for both axial and lateral loading, with examples. Both allowable stress design and load and resistance factor design principles are addressed. Details of design calculations procedures are provided in the appendices.

The Foundation Engineering Handbook
The Foundation Engineering Handbook

Author: Manjriker Gunaratne

Publisher: CRC Press

Published: 2006-01-13

Total Pages: 625

ISBN-13: 020348441X

DOWNLOAD EBOOK

Great strides have been made in the art of foundation design during the last two decades. In situ testing, site improvement techniques, the use of geogrids in the design of retaining walls, modified ACI codes, and ground deformation modeling using finite elements are but a few of the developments that have significantly advanced foundation engineering in recent years. What has been lacking, however, is a comprehensive reference for foundation engineers that incorporates these state-of-the-art concepts and techniques. The Foundation Engineering Handbook fills that void. It presents both classical and state-of-the-art design and analysis techniques for earthen structures, and covers basic soil mechanics and soil and groundwater modeling concepts along with the latest research results. It addresses isolated and shallow footings, retaining structures, and modern methods of pile construction monitoring, as well as stability analysis and ground improvement methods. The handbook also covers reliability-based design and LRFD (Load Resistance Factor Design)-concepts not addressed in most foundation engineering texts. Easy-to-follow numerical design examples illustrate each technique. Along with its unique, comprehensive coverage, the clear, concise discussions and logical organization of The Foundation Engineering Handbook make it the one quick reference every practitioner and student in the field needs.

Pile Design and Construction Practice
Pile Design and Construction Practice

Author: Willis H. Thomas

Publisher: CRC Press

Published: 2007-12-06

Total Pages: 566

ISBN-13: 0203964292

DOWNLOAD EBOOK

This international handbook is essential for geotechnical engineers and engineering geologists responsible for designing and constructing piled foundations. It explains general principles and practice and details current types of pile, piling equipment and methods. It includes calculations of the resistance of piles to compressive loads, pile group

Geotechnical Engineering Handbook
Geotechnical Engineering Handbook

Author: Braja M. Das

Publisher: J. Ross Publishing

Published: 2011

Total Pages: 801

ISBN-13: 1932159835

DOWNLOAD EBOOK

The Geotechnical Engineering Handbook brings together essential information related to the evaluation of engineering properties of soils, design of foundations such as spread footings, mat foundations, piles, and drilled shafts, and fundamental principles of analyzing the stability of slopes and embankments, retaining walls, and other earth-retaining structures. The Handbook also covers soil dynamics and foundation vibration to analyze the behavior of foundations subjected to cyclic vertical, sliding and rocking excitations and topics addressed in some detail include: environmental geotechnology and foundations for railroad beds.