This ground-breaking resource offers you a detailed treatment of EDGE and its critical role in the development of the mobile Internet. The book explains how this global radio based high-speed mobile data standard can be introduced into GSM/GPRS networks, improving data transmission speeds to support multimedia services. It enables you to become thoroughly knowledgeable of EDGE specifications and covers concepts pertaining to several domains, including RF, signal processing, digital communications and communication networks.
GPRS is a packet based wireless communication service that offers data rates from 9.05 up to 171.2 Kbps and continuous connection to the Internet for mobile phone and computer users. GPRS is based on GSM communications and complements existing services such as circuit switched cellular phone connections and the Short Message Service (SMS). GPRS represents the bridge between 2G and 3G mobile telecommunications and is commonly referred to as 2.5G. Implementation of GPRS requires modification of the existing GSM networks in that GSM is a circuit switched technology while GPRS is packet oriented. GPRS enables packet data (the same as is used by an Ethernet LAN, WAN or the Internet) to be sent to and from a mobile station - e.g. mobile phone, PDA or Laptop. WAP and SMS can also be sent using GPRS and individuals working with GPRS need to learn and understand how the mobile stations, the air interface, network architecture, protocol structures and signalling procedures must be modified. GPRS offers much higher data rates than GSM and can be combined with 3G technologies such as EDGE to give even higher bit-rates. It offers many benefits for customers and network operators: such as volume (rather then time) dependent billing and more efficient use of network resources. Due to the worldwide delay in implementing 3G solutions such as CDMA and UMTS the demand for GPRS is still growing. GPRS Networks: Offers detailed information ranging from standards to practical implementation Answers 'how' and 'why' rather than just simply re-stating GPRS specifications Provides comprehensive coverage in a single volume Essential reading for all telecommunications project managers, field engineers, technical staff in network operator and manufacturing organisations, GPRS application and service developers, Datacoms/IT engineers. The comprehensive coverage also makes this a superb reference for students of computer science, telecommunications and electrical engineering.
Annotation This ground-breaking book offers professionals a comprehensive, in-depth presentation of GPRS (general packet radio service). The book helps practitioners understand how this system is used as a major building block technology for the emerging mobile Internet. It explores the most critical aspects of GPRS in great detail, and offers a real-world understanding of the inevitable implementation challenges engineers will face in the field.
To ensure competitive advantage for their companies in wireless product development, developers need to understand how wireless technologies work, what impact they have on applications being developed, and how to use them to optimize products for success in the marketplace. Designed to answer these and other wireless development questions, this unique handbook explores how a host of relevant technologies work together with the new worldwide standards for wireless technologies--General Packet Radio Service (GPRS) and Third Generation (3G). Leading expert Christoffer Andersson clearly explains how GPRS and 3G control the mobile environment, then goes on to describe how the emerging radio technology of Bluetooth fits in with WAP and Java, how wireless applications work with HTTP and TCP/IP on the Internet, and how to create "always-on" wireless applications.
This revised edition of Communication Systems from GSM to LTE: An Introduction to Mobile Networks and Mobile Broadband Second Edition (Wiley 2010) contains not only a technical description of the different wireless systems available today, but also explains the rationale behind the different mechanisms and implementations; not only the ‘how’ but also the ‘why’. In this way, the advantages and also limitations of each technology become apparent. Offering a solid introduction to major global wireless standards and comparisons of the different wireless technologies and their applications, this edition has been updated to provide the latest directions and activities in 3GPP standardization up to Release 12, and importantly includes a new chapter on Voice over LTE (VoLTE). There are new sections on Building Blocks of a Voice Centric Device, Building Blocks of a Smart Phone, Fast Dormancy, IMS and High-Speed Downlink Packet Access, and Wi-Fi-Protected Setup. Other sections have been considerably updated in places reflecting the current state of the technology. • Describes the different systems based on the standards, their practical implementation and design assumptions, and the performance and capacity of each system in practice is analyzed and explained • Questions at the end of each chapter and answers on the accompanying website make this book ideal for self-study or as course material
GSM, GPRS and EDGE Performance - Second Edition provides a complete overview of the entire GSM system. GSM (Global System for Mobile Communications) is the digital transmission technique widely adopted in Europe and supported in North America. It features comprehensive descriptions of GSM’s main evolutionary milestones - GPRS, (General Packet Radio Services) is a packet-based wireless communication service that promises data rates from 56 up to 114 Kbps and continuous connection to the Internet for mobile phone and computer users. AMR and EDGE (Enhanced Data GSM Environment), and such developments have now positioned GERAN (GSM/EDGE Radio Access Network) as a full 3G radio standard. The radio network performance and capabilities of GSM, GPRS, AMR and EDGE solutions are studied in-depth by using revealing simulations and field trials. Cellular operators must now roll out new 3G technologies capable of delivering wireless Internet based multimedia services in a competitive and cost-effective way and this volume, divided into three parts, helps to explain how: 1. Provides an introduction to the complete evolution of GSM towards a radio access network that efficiently supports UMTS services (GERAN). 2. Features a comprehensive study of system performance with simulations and field trials. Covers all the major features such as basic GSM, GPRS, EDGE and AMR and the full capability of the GERAN radio interface for 3G service support is envisaged. 3. Discusses different 3G radio technologies and the position of GERAN within such technologies. Featuring fully revised and updated chapters throughout, the second edition contains 90 pages of new material and features the following new sections, enabling this reference to remain as a leading text in the area: Expanded material on GPRS Includes IMS architecture (Rel’5) and GERAN (Rel’6) features Presents field trial results for AMR and narrowband Provides EGPRS deployment guidelines Features a new chapter on Service Performance An invaluable reference for Engineering Professionals, Research and Development Engineers, Business Development Managers, Technical Managers and Technical Specialists working for cellular operators
Summarizes and surveys current LTE technical specifications and implementation options for engineers and newly qualified support staff Concentrating on three mobile communication technologies, GSM, 3G-WCDMA, and LTE—while majorly focusing on Radio Access Network (RAN) technology—this book describes principles of mobile radio technologies that are used in mobile phones and service providers’ infrastructure supporting their operation. It introduces some basic concepts of mobile network engineering used in design and rollout of the mobile network. It then follows up with principles, design constraints, and more advanced insights into radio interface protocol stack, operation, and dimensioning for three major mobile network technologies: Global System Mobile (GSM) and third (3G) and fourth generation (4G) mobile technologies. The concluding sections of the book are concerned with further developments toward next generation of mobile network (5G). Those include some of the major features of 5G such as a New Radio, NG-RAN distributed architecture, and network slicing. The last section describes some key concepts that may bring significant enhancements in future technology and services experienced by customers. Introduction to Mobile Network Engineering: GSM, 3G-WCDMA, LTE and the Road to 5G covers the types of Mobile Network by Multiple Access Scheme; the cellular system; radio propagation; mobile radio channel; radio network planning; EGPRS - GPRS/EDGE; Third Generation Network (3G), UMTS; High Speed Packet data access (HSPA); 4G-Long Term Evolution (LTE) system; LTE-A; and Release 15 for 5G. Focuses on Radio Access Network technologies which empower communications in current and emerging mobile network systems Presents a mix of introductory and advanced reading, with a generalist view on current mobile network technologies Written at a level that enables readers to understand principles of radio network deployment and operation Based on the author’s post-graduate lecture course on Wireless Engineering Fully illustrated with tables, figures, photographs, working examples with problems and solutions, and section summaries highlighting the key features of each technology described Written as a modified and expanded set of lectures on wireless engineering taught by the author, Introduction to Mobile Network Engineering: GSM, 3G-WCDMA, LTE and the Road to 5G is an ideal text for post-graduate and graduate students studying wireless engineering, and industry professionals requiring an introduction or refresher to existing technologies.
Learn how to use CAMEL to transfer the Intelligent Network concept to the mobile world! CAMEL (Customized Application for the Mobile network Enhanced Logic) is a standard for Intelligent Networks for mobile communications networks. It is currently deployed in all regions of the world, enabling mobile network operators to offer fast and efficient services to their subscribers. This book is an in-depth and dedicated reference on CAMEL, taking the reader through the history and development of Intelligent Networks and the essential principles of CAMEL, to the future of the technology. The author provides guidance on the various standards and specifications, and explains not only how CAMEL works but also why it works this way. Practical hints on the installation of CAMEL in the network are given throughout the book. CAMEL: Intelligent Networks for the GSM, GPRS and UMTS Network: Offers a comprehensive guide to implementing CAMEL. Gives a complete picture, including the network entities & data flows involved. Describes and explains the four CAMEL phases and their aspects. Presents an overview of the principles of Intelligent Networks, such as Finite State Machines, Trigger Detection Points, Event Detection Points and dialogue, essential to understanding CAMEL. Covers charging and accounting issues, and the impact of CAMEL on the charging system in the mobile network. Provides practical hints over and above those mentioned in the formal specifications. This text will be an invaluable resource for intelligent network service logic designers, service network designers, network engineers, and GSM/UMTS network designers and implementers. Advanced students on courses such as ‘Intelligent Networks’, ‘Value Added Services’, and ‘Service Networks’ will also find it an excellent guide to the topic.
This innovative new book, from leading industry experts Gunnar Heine and Holger Sagkob, puts a focus on GPRS (General Packet Radio Service) but also explains the alternative and complementary technologies HSCSD, EDGE, IS-136 HS. It teaches you how the packet data standard GPRS can help you to expand your network towards third generation, meeting the demands of the most-sophisticated mobile data applications. The book focuses on the specifics and procedures of the air-interface, while giving you a thorough understanding of IP related protocols and a detailed presentation of all the important protocol scenarios that you may encounter in GPRS and HSCSD. Other discussions include an introduction to GSM and TDMA, data transmission protocols, and terrestrial interfaces. An extensive glossary provides answers to many of the technical questions that may arise while utilizing GPRS, HSCSD, EDGE or IS-136 HS technology. Packed with more than 200 illustrations that support key topics.
This book provides a detailed technical guide to the virtual and optimised roaming systems for mobile networks Written by a pioneer in the field, this book focuses on the implementation of virtual roaming systems. It generalizes the previous SS7 SMS interworking architectures to voice and data, GPRS, and 3G virtual roaming; extending the discussion of virtual roaming to include location based services, optimal routing and 4G perspectives. The author provides a thorough and detailed technical explanation of the topic covering subjects such as ‘Over the Air’ (OTA) provisioning and detailed geo-localisation systems in a virtual roaming environment. Finally, this book addresses the application of MAP, CAMEL, TCAP, SCCP, and GTP. Key Features: Provides a thorough and detailed technical coverage of virtual and optimised roaming systems for mobile networks Explores the application of MAP, CAMEL, TCAP, SCCP, and GTP Discusses previous SMS Hubs architecture used for SMS interworking and generalises to voice, data, and 3G virtual roaming Includes material on pre-paid case with CAMEL parameter transformations, SMS, Supplementary Services and USSD implementation Focuses on roaming hubs (including an, introduction to Sigtran configuration) and transparent networks of hubs This book will serve as an invaluable reference for network and networking engineers, handset developers, systems implementers, systems integrators, systems software engineers and programmers, wireless specialists and anybody else seeking a comprehensive and practical guide to the basics of virtual roaming systems.
