Geotechnical and Geophysical Site Characterization collects the papers presented at the Third International Conference on Site Characterization (ISC 3) that took place in Taipei from April 1-4, 2008. The subjects covered include new developments in mechanical in-situ testing and interpretation techniques, statistical analysis of test data, geo
Site characterization is a fundamental step towards the proper design, construction and long term performance of all types of geotechnical projects, ranging from foundation, excavation, earth dams, embankments, seismic hazards, environmental issues, tunnels, near and offshore structures. Geotechnical and Geophysical Site Characterization 4 provides practical applications of novel and innovative technologies in geotechnical and geophysical engineering, and is of interest to academics, engineers and professionals involved in Geotechnical Engineering.
Develop a Greater Understanding of How and Why Surface Wave Testing Works Using examples and case studies directly drawn from the authors’ experience, Surface Wave Methods for Near-Surface Site Characterization addresses both the experimental and theoretical aspects of surface wave propagation in both forward and inverse modeling. This book accents the key facets associated with surface wave testing for near-surface site characterization. It clearly outlines the basic principles, the theoretical framework and the practical implementation of surface wave analysis. In addition, it also describes in detail the equipment and measuring devices, acquisition techniques, signal processing, forward and inverse modeling theories, and testing protocols that form the basis of modern surface wave techniques. Review Examples of Typical Applications for This Geophysical Technique Divided into eight chapters, the book explains surface wave testing principles from data measurement to interpretation. It effectively integrates several examples and case studies illustrating how different ground conditions and geological settings may influence the interpretation of data measurements. The authors accurately describe each phase of testing in addition to the guidelines for correctly performing and interpreting results. They present variants of the test within a consistent framework to facilitate comparisons, and include an in-depth discussion of the uncertainties arising at each stage of surface wave testing. Provides a comprehensive and in-depth treatment of all the steps involved in surface wave testing Discusses surface wave methods and their applications in various geotechnical conditions and geological settings Explains how surface wave measurements can be used to estimate both stiffness and dissipative properties of the ground Addresses the issue of uncertainty, which is often an overlooked problem in surface wave testing Includes examples with comparative analysis using different processing techniques and inversion algorithms Outlines advanced applications of surface wave testing such as joint inversion, underwater investigation, and Love wave analysis Written for geotechnical engineers, engineering seismologists, geophysicists, and researchers, Surface Wave Methods for Near-Surface Site Characterization offers practical guidance, and presents a thorough understanding of the basic concepts.
"Soils and rocks are complex natural geomaterials that exhibit a wide range in strength, stiffness, state of stress, structure, and flow characteristics. Geotechnical & Geophysical Site Characterization provides eleven keynote state-of-the-art papers, including the Mitchell Lecture. A total selection of 219 technical papers and theme reports address methods of site exploration related to ground exploration for civil engineering and construction works. These two volumes represent a collection of experience & knowledge regarding various methods of in-situ testing, geophysical techniques, innovative devices, improved interpretation algorithms, and statistical treatment of field data for the characterization of soils, rocks, and other geomaterials. The papers represent the written records and documented efforts from international experts from industry, academe, and government who participated in the Second International Conference on Site Characterization held in Porto, Portugal on September 20-22, 2004. Topics include the utilization of rotary drilling, sampling, and coring techniques. Of particular interest is the variety of in-situ tests, including standard penetration, cone penetration, flat dilatometer, pressuremeter, vane shear, piezocone, dynamic probes, and specialized tools, as well as geophysical approaches: resistivity surveys, surface waves, crosshole, downhole, electromagnetic conductivity, and ground penetrating radar. A careful and proper site evaluation is required in the analysis and design of new structures, construction monitoring, and forensic studies that require remediation. Many of the contributions relate to case studies of projects that involve shallow foundations, drilled shafts, pilings, slope stability, excavations, earth dams, tunnels, and mining. Several papers discuss a combined approach using multiple methods and/or complementary set of geotechnical & geophysical tests to ascertain the characteristics of the ground."--back cover.
The scope of engineering seismology includes geotechnical site investigations for buildings and engineering infrastructures, such as dams, levees, bridges, and tunnels, landslide and active-fault investigations, seismic microzonation, and geophysical investigations of historic buildings. These projects require multidisciplinary participation by the geologist, geophysicist, and geotechnical and earthquake engineers. A key objective of this book (SEG Investigations in Geophysics Series No. 17) by Öz Yilmaz is to encourage the specialists from these disciplines to apply the seismic method to solve the many challenging engineering problems they face. The broader scope of engineering seismology also includes exploration of earth resources, including groundwater exploration, coal and mineral exploration, and geothermal exploration. While focusing on the application of the seismic method to geotechnical site investigations, this book includes many case studies in all of the applications of engineering seismology.
This book presents 09 keynote and invited lectures and 177 technical papers from the 4th International Conference on Geotechnics for Sustainable Infrastructure Development, held on 28-29 Nov 2019 in Hanoi, Vietnam. The papers come from 35 countries of the five different continents, and are grouped in six conference themes: 1) Deep Foundations; 2) Tunnelling and Underground Spaces; 3) Ground Improvement; 4) Landslide and Erosion; 5) Geotechnical Modelling and Monitoring; and 6) Coastal Foundation Engineering. The keynote lectures are devoted by Prof. Harry Poulos (Australia), Prof. Adam Bezuijen (Belgium), Prof. Delwyn Fredlund (Canada), Prof. Lidija Zdravkovic (UK), Prof. Masaki Kitazume (Japan), and Prof. Mark Randolph (Australia). Four invited lectures are given by Prof. Charles Ng, ISSMGE President, Prof.Eun Chul Shin, ISSMGE Vice-President for Asia, Prof. Norikazu Shimizu (Japan), and Dr.Kenji Mori (Japan).
This practical handbook of properties for soils and rock contains, in a concise tabular format, the key issues relevant to geotechnical investigations, assessments and designs in common practice. In addition, there are brief notes on the application of the tables. These data tables are compiled for experienced geotechnical professionals who require a reference document to access key information. There is an extensive database of correlations for different applications. The book should provide a useful bridge between soil and rock mechanics theory and its application to practical engineering solutions. The initial chapters deal with the planning of the geotechnical investigation, the classification of the soil and rock properties and some of the more used testing is then covered. Later chapters show the reliability and correlations that are used to convert that data in the interpretative and assessment phase of the project. The final chapters apply some of these concepts to geotechnical design. This book is intended primarily for practicing geotechnical engineers working in investigation, assessment and design, but should provide a useful supplement for postgraduate courses.
The need for green technologies and solutions which will deliver the energy requirements of both the developed and developing world to support sustainability and protect the environment worldwide has never been more urgent. This book contains the proceedings of the 2nd International Conference on Green Energy, Environment and Sustainable Development (GEESD2021) which, due to the COVID-19 pandemic around the world and with the strict travel restrictions in China, was held as a hybrid conference (both physically and online via Zoom) in Shanghai, China on 26 and 27 June 2021. It provided an opportunity to bring together an international community of leading scientists, researchers, engineers and academics, as well as industrial professionals, to exchange and share their experiences and research results in the energy, environment and sustainable development sector. In total, 80 participants were able to exchange knowledge and discuss the latest developments in the field. GEESD2021 attracted more than 250 submissions, 88 of which were accepted after an extensive period of peer review by more than 100 reviewers and members of the program committee. These are included here, grouped into 3 sections, with 28 papers on sustainable energy; 34 on ecology; and 26 papers covering environmental pollution and protection. Offering an overview of the most up-to-date findings and technologies in the field of sustainable energy and environmental protection, the book will be of interest to all those working in this field.
