Friction-Induced Vibration in Lead Screw Drives covers the dynamics of lead screw drives with an emphasis on the role of friction. Friction-induced vibration in lead screws can be the cause of unacceptably high levels of audible noise as well as loss of operation accuracy and shortened life. Although lead screw drives have a long history and their mechanical design and manufacturing aspects are very well understood, the role of friction in their dynamical behavior has not been comprehensively treated. The book draws on the vast body of work on the subject of dynamical systems with friction (such as disk brake systems) and offers said treatment, along with: · Unique coverage of modeling of multi-DOF lead screw systems with friction · Detailed analysis of negative damping, mode coupling, and kinematic constraint instability mechanisms in lead screws drives · A practical parameter identification approach for the velocity dependent coefficient of friction in lead screw drives Friction-Induced Vibration in Lead Screw Drives serves as the definitive text on the friction-induced vibration of lead screws, and includes a practical case study where the developed methods are used to study the excessive noise problem of a lead screw drive system and to put forward design modifications that eliminate the friction-induced vibrations.
This book is aimed primarily towards physicists and mechanical engineers specializing in modeling, analysis, and control of discontinuous systems with friction and impacts. It fills a gap in the existing literature by offering an original contribution to the field of discontinuous mechanical systems based on mathematical and numerical modeling as well as the control of such systems. Each chapter provides the reader with both the theoretical background and results of verified and useful computations, including solutions of the problems of modeling and application of friction laws in numerical computations, results from finding and analyzing impact solutions, the analysis and control of dynamical systems with discontinuities, etc. The contents offer a smooth correspondence between science and engineering and will allow the reader to discover new ideas. Also emphasized is the unity of diverse branches of physics and mathematics towards understanding complex piecewise-smooth dynamical systems. Mathematical models presented will be important in numerical experiments, experimental measurements, and optimization problems found in applied mechanics.
Now in its third edition, this standard reference is a comprehensive treatment of nonsmooth mechanical systems refocused to give more prominence to issues connected with control and modelling. It covers Lagrangian and Newton–Euler systems, detailing mathematical tools such as convex analysis and complementarity theory. The ways in which nonsmooth mechanics influence and are influenced by well-posedness analysis, numerical analysis and simulation, modelling and control are explained. Contact/impact laws, stability theory and trajectory-tracking control are given detailed exposition connected by a mathematical framework formed from complementarity systems and measure-differential inclusions. Links are established with electrical circuits with set-valued nonsmooth elements as well as with other nonsmooth dynamical systems like impulsive and piecewise linear systems. Nonsmooth Mechanics (third edition) retains the topical structure familiar from its predecessors but has been substantially rewritten, edited and updated to account for the significant body of results that have emerged in the twenty-first century—including developments in: the existence and uniqueness of solutions; impact models; extension of the Lagrange–Dirichlet theorem and trajectory tracking; and well-posedness of contact complementarity problems with and without friction. Many figures (both new and redrawn to improve the clarity of the presentation) and examples are used to illustrate the theoretical developments. Material introducing the mathematics of nonsmooth mechanics has been improved to reflect the broad range of applications interest that has developed since publication of the second edition. The detail of some mathematical essentials is provided in four appendices. With its improved bibliography of over 1,300 references and wide-ranging coverage, Nonsmooth Mechanics (third edition) is sure to be an invaluable resource for researchers and postgraduates studying the control of mechanical systems, robotics, granular matter and relevant fields of applied mathematics. “The book’s two best features, in my view are its detailed survey of the literature... and its detailed presentation of many examples illustrating both the techniques and their limitations... For readers interested in the field, this book will serve as an excellent introductory survey.” Andrew Lewis in Automatica “It is written with clarity, contains the latest research results in the area of impact problems for rigid bodies and is recommended for both applied mathematicians and engineers.” Panagiotis D. Panagiotopoulos in Mathematical Reviews “The presentation is excellent in combining rigorous mathematics with a great number of examples... allowing the reader to understand the basic concepts.” Hans Troger in Mathematical Abstracts “/i>
Today it is more important than ever for designers to consider product and system durability in relation to reliability and sustainability issues. Containing papers presented at the Fourth International Conference on Tribology and Design, Tribology and Design II brings together work by colleagues from different disciplines interested in problems of surface interaction and design. The topics covered include; Design tools; Test methods; Surface engineering; Tribology under extreme conditions; Surface measurements; Advances in lubrication; Wear mechanics; Plasticizers and slip additives; Tribology in biomechanics; Nano-tribology and design; Tribology in space applications; Reliability and life-oriented design; Advanced materials.
Issues in Acoustic and Ultrasound Technology: 2013 Edition is a ScholarlyEditions™ book that delivers timely, authoritative, and comprehensive information about Applied Acoustics. The editors have built Issues in Acoustic and Ultrasound Technology: 2013 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Applied Acoustics in this book to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Acoustic and Ultrasound Technology: 2013 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Introduction to Linear Control Systems is designed as a standard introduction to linear control systems for all those who one way or another deal with control systems. It can be used as a comprehensive up-to-date textbook for a one-semester 3-credit undergraduate course on linear control systems as the first course on this topic at university. This includes the faculties of electrical engineering, mechanical engineering, aerospace engineering, chemical and petroleum engineering, industrial engineering, civil engineering, bio-engineering, economics, mathematics, physics, management and social sciences, etc. The book covers foundations of linear control systems, their raison detre, different types, modelling, representations, computations, stability concepts, tools for time-domain and frequency-domain analysis and synthesis, and fundamental limitations, with an emphasis on frequency-domain methods. Every chapter includes a part on further readings where more advanced topics and pertinent references are introduced for further studies. The presentation is theoretically firm, contemporary, and self-contained. Appendices cover Laplace transform and differential equations, dynamics, MATLAB and SIMULINK, treatise on stability concepts and tools, treatise on Routh-Hurwitz method, random optimization techniques as well as convex and non-convex problems, and sample midterm and endterm exams. The book is divided to the sequel 3 parts plus appendices. PART I: In this part of the book, chapters 1-5, we present foundations of linear control systems. This includes: the introduction to control systems, their raison detre, their different types, modelling of control systems, different methods for their representation and fundamental computations, basic stability concepts and tools for both analysis and design, basic time domain analysis and design details, and the root locus as a stability analysis and synthesis tool. PART II: In this part of the book, Chapters 6-9, we present what is generally referred to as the frequency domain methods. This refers to the experiment of applying a sinusoidal input to the system and studying its output. There are basically three different methods for representation and studying of the data of the aforementioned frequency response experiment: these are the Nyquist plot, the Bode diagram, and the Krohn-Manger-Nichols chart. We study these methods in details. We learn that the output is also a sinusoid with the same frequency but generally with different phase and magnitude. By dividing the output by the input we obtain the so-called sinusoidal or frequency transfer function of the system which is the same as the transfer function when the Laplace variable s is substituted with . Finally we use the Bode diagram for the design process. PART III: In this part, Chapter 10, we introduce some miscellaneous advanced topics under the theme fundamental limitations which should be included in this undergraduate course at least in an introductory level. We make bridges between some seemingly disparate aspects of a control system and theoretically complement the previously studied subjects. Appendices: The book contains seven appendices. Appendix A is on the Laplace transform and differential equations. Appendix B is an introduction to dynamics. Appendix C is an introduction to MATLAB, including SIMULINK. Appendix D is a survey on stability concepts and tools. A glossary and road map of the available stability concepts and tests is provided which is missing even in the research literature. Appendix E is a survey on the Routh-Hurwitz method, also missing in the literature. Appendix F is an introduction to random optimization techniques and convex and non-convex problems. Finally, appendix G presents sample midterm and endterm exams, which are class-tested several times.
Recently, there has been an increase in the number of e-commerce users. This has caused online shopping to become a new and challenging market for e-commerce vendors. Security, inventory management, reliability, and performance of e-commerce websites are a few of the challenges associated with the rising popularity of e-commerce. On a daily basis, millions of e-commerce transactions are taking place. This generates a huge amount of data that can be used to solve the various challenges of e-commerce. Further study on how this data can be used to address these issues is required to propel businesses forward. Empirical Research for Futuristic E-Commerce Systems: Foundations and Applications shares experiences and research outcomes on all aspects of intelligent software solutions such as machine learning, nature-inspired computing, and data science for business-to-consumer (B2C) e-commerce. By looking at the exponential growth of the e-commerce market and its popularity, this book also focuses on the current issues, solutions, and future possibilities in the B2C model of e-commerce. Covering a range of critical topics such as online shopping, supply chain management, and blockchain, this reference work is ideal for academic scientists, data scientists, software developers, business experts, researchers, scholars, practitioners, academicians, instructors, and students.
The transformation of vibrations into electric energy through the use of piezoelectric devices is an exciting and rapidly developing area of research with a widening range of applications constantly materialising. With Piezoelectric Energy Harvesting, world-leading researchers provide a timely and comprehensive coverage of the electromechanical modelling and applications of piezoelectric energy harvesters. They present principal modelling approaches, synthesizing fundamental material related to mechanical, aerospace, civil, electrical and materials engineering disciplines for vibration-based energy harvesting using piezoelectric transduction. Piezoelectric Energy Harvesting provides the first comprehensive treatment of distributed-parameter electromechanical modelling for piezoelectric energy harvesting with extensive case studies including experimental validations, and is the first book to address modelling of various forms of excitation in piezoelectric energy harvesting, ranging from airflow excitation to moving loads, thus ensuring its relevance to engineers in fields as disparate as aerospace engineering and civil engineering. Coverage includes: Analytical and approximate analytical distributed-parameter electromechanical models with illustrative theoretical case studies as well as extensive experimental validations Several problems of piezoelectric energy harvesting ranging from simple harmonic excitation to random vibrations Details of introducing and modelling piezoelectric coupling for various problems Modelling and exploiting nonlinear dynamics for performance enhancement, supported with experimental verifications Applications ranging from moving load excitation of slender bridges to airflow excitation of aeroelastic sections A review of standard nonlinear energy harvesting circuits with modelling aspects.
Original research on SHM sensors, quantification strategies, system integration and control for a wide range of engineered materials New applications in robotics, machinery, as well as military aircraft, railroads, highways, bridges, pipelines, stadiums, tunnels, space exploration and energy production Continuing a critical book series on structural health monitoring (SHM), this two-volume set (with full-text searchable CD-ROM) offers, as its subtitle implies, a guide to greater integration and control of SHM systems. Specifically, the volumes contain new research that will enable readers to more efficiently link sensor detection, diagnostics/quantification, overall system functionality, and automated, e.g., robotic, control, thus further closing the loop from inherent signal-based damage detection to responsive real-time maintenance and repair. SHM performance is demonstrated in monitoring the behavior of composites, metals, concrete, polymers and selected nanomaterials in a wide array of surroundings, including harsh environments, under extreme (e.g., seismic) loading and in space. New information on smart sensors and network optimization is enhanced by novel statistical and model-based methods for signal processing and data quantification. A special feature of the book is its explanation of emerging control technologies. Research in these volumes was initially presented in September 2013 at the 9th International Workshop on Structural Health Monitoring (IWSHM), held at Stanford University and sponsored by the Air Force Office of Scientific Research, the Army Research Laboratory, and the Office of Naval Research.
Based on a systematic understanding of its theoretical foundations, “Self-Excited Vibration: Theory, Paradigms, and Research Methods” offers a method for analyzing any type of self-excited vibration (SEV). After summarizing the research results of various SEV phenomenon, including chatter, shimmy, rotor whirl, flutter, gallop, and SEV of man-made control systems, the author constructs a general constitutive mechanism of SEV, as well as a common research program and detailed analysis technique. All of these will help the reader independently analyze any new SEV phenomena. Prof. Wenjing Ding was the Director of the Dynamics and Vibration Division of the Engineering Mechanics Department of Tsinghua University, China.
