Forces in Wingwalls from Thermal Expansion of Skewed Semi-integral Bridges
Forces in Wingwalls from Thermal Expansion of Skewed Semi-integral Bridges

Author: Eric P. Steinberg

Publisher:

Published: 2010

Total Pages: 87

ISBN-13:

DOWNLOAD EBOOK

Jointless bridges, such as semi-integral and integral bridges, have become more popular in recent years because of their simplicity in the construction and the elimination of high costs related to joint maintenance. Prior research has shown that skewed semi-integral bridges tend to expand and rotate as the ambient air temperature increases through the season. As a result of the bridge movement, forces are generated and transferred to the wingwalls of the bridge. ODOT does not currently have a procedure to determine the forces generated in the wingwalls from the thermal expansion and rotation of skewed semi-integral bridges. In this study, two semi-integral bridges with skews were instrumented and monitored for behavior at the interface of the bridge's diaphragm and wingwall. A parametric analysis was also performed to determine the effects of different spans and bridge lengths on he magnitude of the forces. Based on the field results from the study it is recommended for the design of the wingwalls turned to run nearly parallel with the longitudinal axis of skewed semi-integral bridges should include a 100 psi loading at the wingwall/diaphragm interface from the thermal expansion of the bridge. In addition, analytical evaluations showed that longer spans and higher skews than allowed by ODOT's BDM could be used. However, additional considerations for larger movements and stresses generated at the wingwall/diaphragm interface would need to be considered in designs. Finally, bearing retainers in diaphragms, if used, require adequate cover to avoid spalling of concrete.

Forces in Wingwalls from Thermal Expansion of Skewed Semi-integral Bridges
Forces in Wingwalls from Thermal Expansion of Skewed Semi-integral Bridges

Author: Eric P. Steinberg

Publisher:

Published: 2010

Total Pages: 4

ISBN-13:

DOWNLOAD EBOOK

Bridges that utilize expansion joints have an overall higher maintenance cost due to leakage at the expansion joint leading to deterioration of the joint, as well as structural components beneath the joint including the superstructure and substructure. Jointless bridges, such as semi-integral and integral bridges, have become more popular in recent years because of their simplicity in the construction and the elimination of expansion joints. Jointless bridges also improve riding quality, promote lower impact loads, reduce snowplow damage to decks and approach slabs, as well as improve the seismic resistance of the bridge.

Forces Exerted in the Wingwalls of Skewed Semi-integral Bridges
Forces Exerted in the Wingwalls of Skewed Semi-integral Bridges

Author: Eric P. Steinberg

Publisher:

Published: 2001

Total Pages: 90

ISBN-13:

DOWNLOAD EBOOK

In the state of Ohio, semi-integral bridges have become more popular because these bridges eliminate high maintenance joints. The girders in a semi-integral bridge are encased in a diaphragm supported on elastomeric pads that bear on the abutment. Movement of the diaphragm caused by thermal change is theoretically resisted by backfill and also by the wingwalls for skewed bridges. The wingwalls are subjected to forces as a skewed bridge rotates during thermal expansion.

Long-Term Behavior of Integral Abutment Bridges
Long-Term Behavior of Integral Abutment Bridges

Author: Robert J. Frosch

Publisher: Joint Transportation Research Program

Published: 2011-08-15

Total Pages: 149

ISBN-13: 9781622600120

DOWNLOAD EBOOK

Integral abutment (IA) construction has become the preferred method over conventional construction for use with typical highway bridges. However, the use of these structures is limited due to state mandated length and skew limitations. To expand their applicability, studies were implemented to define limitations supported by rational analysis rather than simply engineering judgment. Previous research investigations have resulted in larger length limits and an overall better understanding of these structures. However, questions still remain regarding IA behavior; specifically questions regarding long-term behavior and effects of skew. To better define the behavior of these structures, a study was implemented to specifically investigate the long term behavior of IA bridges. First, a field monitoring program was implemented to observe and understand the in-service behavior of three integral abutment bridges. The results of the field investigation were used to develop and calibrate analytical models that adequately capture the long-term behavior. Second, a single-span, quarter-scale integral abutment bridge was constructed and tested to provide insight on the behavior of highly skewed structures. From the acquired knowledge from both the field and laboratory investigations, a parametric analysis was conducted to characterize the effects of a broad range of parameters on the behavior of integral abutment bridges. This study develops an improved understanding of the overall behavior of IA bridges. Based on the results of this study, modified length and skew limitations for integral abutment bridge are proposed. In addition, modeling recommendations and guidelines have been developed to aid designers and facilitate the increased use of integral abutment bridges.

Expansion Joints in Buildings
Expansion Joints in Buildings

Author: National Research Council

Publisher: National Academies Press

Published: 1974-02-01

Total Pages: 53

ISBN-13: 0309022339

DOWNLOAD EBOOK

Many factors affect the amount of temperature-induced movement that occurs in a building and the extent to which this movement can occur before serious damage develops or extensive maintenance is required. In some cases joints are being omitted where they are needed, creating a risk of structural failures or causing unnecessary operations and maintenance costs. In other cases, expansion joints are being used where they are not required, increasing the initial cost of construction and creating space utilization problems. As of 1974, there were no nationally acceptable procedures for precise determination of the size and the location of expansion joints in buildings. Most designers and federal construction agencies individually adopted and developed guidelines based on experience and rough calculations leading to significant differences in the various guidelines used for locating and sizing expansion joints. In response to this complex problem, Expansion Joints in Buildings: Technical Report No. 65 provides federal agencies with practical procedures for evaluating the need for through-building expansion joints in structural framing systems. The report offers guidelines and criteria to standardize the practice of expansion joints in buildings and decrease problems associated with the misuse of expansions joints. Expansions Joints in Buildings: Technical Report No. 65 also makes notable recommendations concerning expansion, isolation, joints, and the manner in which they permit separate segments of the structural frame to expand and to contract in response to temperature fluctuations without adversely affecting the buildings structural integrity or serviceability.

Integral and Semi-Integral Bridges
Integral and Semi-Integral Bridges

Author: Martin P Burke Jr

Publisher: John Wiley & Sons

Published: 2009-06-17

Total Pages: 272

ISBN-13: 1444316370

DOWNLOAD EBOOK

Worldwide, integral type bridges are being used in greater numbersin lieu of jointed bridges because of their structural simplicity,first-cost economy, and outstanding durability. In the UK and theUS states of Tennessee and Missouri, for example, the constructionof most moderate length bridges is based on the integral bridgeconcept. The state of Washington uses semi-integral bridges almostexclusively, while, depending on subfoundation characteristics, thestate of Ohio and others use a mix of these two bridge types. Integral and Semi-Integral Bridges has been written by apracticing bridge design engineer who has spent his entire careerinvolved in the origination, evaluation and design of such bridgesin the USA, where they have been in use since the late1930’s. This work shows how the analytical complexity due tothe elimination of movable joints can be minimized to negligiblelevels so that most moderate length bridges can be easily andquickly modified or replaced with either integral or semi-integralbridges. Bridge design, construction, and maintenance engineers; bridgedesign administrators; graduate level engineering students andstructural research professionals will all find this bookexceptionally informative for a wide range of highway bridgeapplications.