Fishing Boat Construction, 2
Fishing Boat Construction, 2

Author: Ned Coackley

Publisher: Food & Agriculture Org.

Published: 1991

Total Pages: 96

ISBN-13: 9789251031162

DOWNLOAD EBOOK

The contents are intended to give the reader a sound basic knowledge of FRP and it's possibilities and limitations in boatbuilding. Any person using the document is likely to have some technical or management capacity upon which to base the information. It is not intended to describe all aspects of FRP, but attempts to cover most subjects applicable to small vessel construction and setting up a new boatyard. The publication leads up to and deals mainly with the single skin manual layup technique, however, other FRP technologies are also presented. Sections such as Design and Construction Considerations, Planning for Construction and the Production Flow Chart are intended to stimulate appraisal of the requirements of FRP boatbuilding while others such as Workshop, Equipment and Tools and Basic Vessel Construction offer practical guidelines.

Fisheries Technologies for Developing Countries
Fisheries Technologies for Developing Countries

Author: National Research Council

Publisher: National Academies Press

Published: 1988-02-01

Total Pages: 177

ISBN-13: 0309037883

DOWNLOAD EBOOK

In developing countries, traditional fishermen are important food contributors, yet technological information and development assistance to third-world nations often focuses on agriculture and industrial fishing, without addressing the needs of independent, small-scale fishermen. This book explores technological considerations of small-scale, primitive fishing technologies, and describes innovative, relatively inexpensive methods and tools that have already been successfully applied in developing countries. It offers practical information about all aspects of small-scale fishing, including boat design and construction, fishing methods and gear, artificial reef construction and fish aggregating devices, techniques for coastal mariculture, and simple methods for processing and preserving fish once they are caught. Fisheries Technologies for Developing Countries is illustrated throughout with photographs of the devices and construction methods described in the text.

Fishing Boat Construction
Fishing Boat Construction

Author: Richard O. N. Riley

Publisher: Food & Agriculture Org.

Published: 1995

Total Pages: 164

ISBN-13: 9789251037645

DOWNLOAD EBOOK

The increasing cost and scarcity of durable boatbuilding timbers have affected the construction of fishing craft around the world. The developed world has by and large witnessed the transfer from traditional wooden boatbuilding methods to either less conventional wood construction techniques (e.g., plywood or wood laminates) or non-wood materials such as fibre reinforced plastic (FRP), steel, aluminium and ferrocement. These techniques generally favour less labour intensive methods of construction. In the developing world where timber is still the predominant boatbuilding material, the scarcity and high cost of good quality timber have not meant that less wooden boats are being built, but rather that building quality has deteriorated through the use of poor quality timber. At the same time, however, attempts have been made to diversify construction methods with varying degrees of success. This publication is intended to benefit those who are considering ferrocement construction; it is assumed that those who use the book are already conversant in small fishing vessel construction.

Fishing Boat Construction
Fishing Boat Construction

Author: John F. Fyson

Publisher: Food & Agriculture Org.

Published: 1988

Total Pages: 76

ISBN-13: 9789251026724

DOWNLOAD EBOOK

The publication is intended to provide the reader with a sound basic knowledge of ferrocement and its potential and limitations in boatbuilding. It is assumed that those people using this document are already familiar with the construction of small fishing boats. The sections cover all stages of building a small ferrocement fishing craft from design and lofting requirements and techniques, to repairs and the preparation and painting of a ferrocement hull. Information is presented on site, workshop, equipment, tools and launching systems; materials used in construction; testing and practice of construction materials; construction of a ferrocement hull; repairs and joints in ferrocement; preparing and painting a ferrocement hull; the requirements specific to ferrocement boat construction and ferrocement/timber fitting out; and guidelines available for building a boat to classification standards. The annex contains costings, and drawings of a 12.8 m ferrocement trawler built in India with FAO technical assistance; general arrangement, hull construction, lines plans, frames, and superstructure are covered.

Fishing Boat Designs
Fishing Boat Designs

Author: Øyvind Gulbrandsen

Publisher: Food & Agriculture Org.

Published: 1997

Total Pages: 76

ISBN-13: 9789251040614

DOWNLOAD EBOOK

Superseded by the Rev.2 edition (ISBN 9251052018) published on 29.03.2005

Fishing Boat Designs
Fishing Boat Designs

Author: Food and Agriculture Organization of the United Nations

Publisher: Food & Agriculture Org.

Published: 2004-10-30

Total Pages: 76

ISBN-13: 9789251052013

DOWNLOAD EBOOK

The first edition was published in 1977 and this edition completely revises and supersedes the Rev.1 edition (ISBN 9251040613)

Fishing Boat Construction
Fishing Boat Construction

Author: Thomas Anmarkrud

Publisher: Food & Agriculture Organization of the UN (FAO)

Published: 2009

Total Pages: 84

ISBN-13:

DOWNLOAD EBOOK

In many areas of the world, finding the type of timber needed to build a good quality wooden boat is becoming a problem. As a result, Fibreglass Reinforced Plastic (FRP) is beginning to be used by many wooden boat builders. The information provided in this manual relates specifically to production of a 4.5 m open fishing boat called the MDV- 1. It is a simple, easily driven, seaworthy boat intended for both rowing and power propulsion. Its general-purpose design is suitable for inshore waters around the world. A general basic knowledge in the use of FRP as a boatbuilding material is presented and step by step construction of a 4.5 m open fishing boat using FRP is set out in detail. In addition, the booklet describes how to maintain an FRP boat and how to recognize fatigue problems. Some simple guidelines on how to repair minor damage to FRP are also included. The information is intended for less experienced boatbuilders who already have a plug or mould. This manual will also be a useful aid for maintaining and improving quality control practiced by boatbuilders who already have some experience working with this material.

Fishing Boat and Dinghi Building Plans
Fishing Boat and Dinghi Building Plans

Author: Arne Fredrik Haug

Publisher: BoD – Books on Demand

Published: 2015-02-22

Total Pages: 49

ISBN-13: 3954274574

DOWNLOAD EBOOK

This book, first published in 1974, was designed to provide assistance to builders of wooden flat-bottom fishing boats, transport boats, dinghis and canoes. It contains plans for eight boat types from 4.90 m to 11.25 m as well as many other useful information. Dieses Buch aus dem Jahr 1974 will Selbstbauer von hölzernen Fischerbooten, Lastkähnen, Dingis und Kanus unterstützen. Es enthält acht Baupläne für Boote von 4,90 bis 11,25 m. sowie eine Fülle von weiterführenden Informationen.

Fishing operations. 1. Best practices to improve safety at sea in the fisheries sector. FAO Technical Guidelines for Responsible Fisheries No. 1, Suppl. 3
Fishing operations. 1. Best practices to improve safety at sea in the fisheries sector. FAO Technical Guidelines for Responsible Fisheries No. 1, Suppl. 3

Author: Food and Agriculture Organization of the United Nations

Publisher: Food & Agriculture Org.

Published: 2018-11-15

Total Pages: 217

ISBN-13: 9251088098

DOWNLOAD EBOOK

These guidelines have been produced to support implementation of the Code of Conduct for Responsible Fisheries with regard to safety at sea in the fisheries sector. Their purpose is to enable relevant authorities to develop and implement strategies aimed at improved safety, health and conditions of service at sea in capture fisheries and aquaculture operations. They apply to all commercial fishing activities, as well as activities at sea within the aquaculture sector. Furthermore, the principles therein, may also be applied to vessels engaged in fisheries research. However, while these guidelines are not directed at sport and recreational activities carried out within the aquatic environment, administrations responsible for such sectors may well take note of the safety and health issues therein. The guidelines contribute to Strategic Objective 5: Increase the resilience of livelihoods to threats and crises.