Mercury Stabilization in Chemically Bonded Phosphate Ceramics

Mercury Stabilization in Chemically Bonded Phosphate Ceramics

Author:

Publisher:

Published: 2000

Total Pages: 12

ISBN-13:

DOWNLOAD EBOOK

Mercury stabilization and solidification is a significant challenge for conventional stabilization technologies. This is because of the stringent regulatory limits on leaching of its stabilized products. In a conventional cement stabilization process, Hg is converted at high pH to its hydroxide, which is not a very insoluble compound; hence the preferred route for Hg sulfidation to convert it into insoluble cinnabar (HgS). Unfortunately, efficient formation of this compound is pH-dependent. At a high pH, one obtains a more soluble Hg sulfate, in a very low pH range, insufficient immobilization occurs because of the escape of hydrogen sulfide, while efficient formation of HgS occurs only in a moderately acidic region. Thus, the pH range of 4 to 8 is where stabilization with Chemically Bonded Phosphate Ceramics (CBPC) is carried out. This paper discusses the authors experience on bench-scale stabilization of various US Department of Energy (DOE) waste streams containing Hg in the CBPC process. This process was developed to treat DOE's mixed waste streams. It is a room-temperature-setting process based on an acid-base reaction between magnesium oxide and monopotassium phosphate solution that forms a dense ceramic within hours. For Hg stabilization, addition of a small amount (


Chemically Bonded Phosphate Ceramics

Chemically Bonded Phosphate Ceramics

Author: Arun S. Wagh

Publisher: Elsevier

Published: 2004-11-19

Total Pages: 294

ISBN-13: 0080455670

DOWNLOAD EBOOK

The first chemically bonded phosphate ceramics (zinc phosphate dental cements) were developed over a century ago. However it has only been in the last 30 years that a new breed of materials has been discovered. Chemically Bonded Phosphate Ceramics brings together latest developments in this field including several novel ceramics, from Argonne and Brookhaven National Laboratories. Coupled with further advances in their use as biomaterials, these materials have found uses in diverse fields in recent years. Applications range from advanced structural materials to oil-well cements and stabilization and encapsulation of hazardous and radioactive waste. Such developments call a single source for their science and applications. This book provides the first comprehensive account to fulfil this need. - Provides a foundation into the latest developments in chemically bonded phosphate ceramics - Explores new CBPC's with a wide range of practical applications - Over 30 years worth of developments and applications in the field available in a single source


Processing and Properties of Advanced Ceramics and Composites III

Processing and Properties of Advanced Ceramics and Composites III

Author: Narottam P. Bansal

Publisher: John Wiley & Sons

Published: 2011-07-12

Total Pages: 220

ISBN-13: 1118059980

DOWNLOAD EBOOK

This book contains 17 papers from the Innovative Processing and Synthesis of Ceramics, Glasses and Composites and Advances in Ceramic Matrix Composites symposia held during the 2010 Materials Science and Technology (MS&T'10) meeting, October 17-21, 2010, Houston, Texas. Topics include: Fiber Composites; Modeling and Characterization; Nanomaterials; Testing; Microstructure-Property Relationships; Advanced Coatings; and Processing Methods.


Developments in Strategic Materials and Computational Design III, Volume 33, Issue 10

Developments in Strategic Materials and Computational Design III, Volume 33, Issue 10

Author: Waltraud M. Kriven

Publisher: John Wiley & Sons

Published: 2012-11-29

Total Pages: 216

ISBN-13: 1118530543

DOWNLOAD EBOOK

Exploring the latest findings, new materials, and applications, this issue keeps readers current with some of the most important developments in strategic materials and the computational design of ceramics and composites. It features select contributions from one symposium and three focused sessions that took place in January 2012 during the 36th International Conference and Exposition on Advanced Ceramics and Composites (ICACC). This issue represents one of nine CESP issues published from the 36th ICACC meeting.


Iron-phosphate-based Chemically Bonded Phosphate Ceramics for Mixed Waste Stabilization

Iron-phosphate-based Chemically Bonded Phosphate Ceramics for Mixed Waste Stabilization

Author:

Publisher:

Published: 1997

Total Pages: 10

ISBN-13:

DOWNLOAD EBOOK

In an effort to develop chemically bonded phosphate ceramics for mixed waste stabilization, a collaborative project to develop iron-phosphate based ceramics has been initiated between Argonne National Laboratory and the V.G. Khlopin Radium Institute in St. Petersburg, Russia. The starter powders are oxides of iron that are generated as inexpensive byproduct materials in the iron and steel industry. They contain iron oxides as a mixture of magnetite (Fe3O4) and haematite (Fe2O3). In this initial phase of this project, both of these compounds were investigated independently. Each was reacted with phosphoric acid solution to form iron phosphate ceramics. In the case of magnetite, the reaction was rapid. Adding ash as the waste component containing hazardous contaminants resulted in a dense and hard ceramic rich in glassy phase. On the other hand, the reaction of phosphoric acid solution with a mixture of haematite and ash waste contaminated with cesium and americium was too slow. Samples had to be molded under pressure. They were cured for 2-3 weeks and then hardened by heating at 350°C for 3 h. The resulting ceramics in both cases were subjected to physical tests for measurement of density, open porosity, compression strength, phase analyses using X-ray diffraction and differential thermal analysis, and leaching tests using toxicity characteristic leaching procedure (TCLP) and ANS 16.1 with 7 days of leaching. Using the preliminary information obtained from these tests, we evaluated these materials for stabilization of Department of Energy's mixed waste streams.


Chemically Bonded Phosphate Ceramics

Chemically Bonded Phosphate Ceramics

Author: Arun S. Wagh

Publisher: Elsevier

Published: 2016-05-17

Total Pages: 424

ISBN-13: 008100396X

DOWNLOAD EBOOK

Chemically Bonded Phosphate Ceramics brings together the latest developments in chemically bonded phosphate ceramics (CBPCs), including several novel ceramics, from US Federal Laboratories such as Argonne, Oak Ridge, and Brookhaven National Laboratories, as well as Russian and Ukrainian nuclear institutes. Coupled with further advances in their use as biomaterials, these materials have found uses in diverse fields in recent years. Applications range from advanced structural materials to corrosion and fire protection coatings, oil-well cements, stabilization and encapsulation of hazardous and radioactive waste, nuclear radiation shielding materials, and products designed for safe storage of nuclear materials. Such developments call for a single source to cover their science and applications. This book is a unique and comprehensive source to fulfil that need. In the second edition, the author covers the latest developments in nuclear waste containment and introduces new products and applications in areas such as biomedical implants, cements and coatings used in oil-well and other petrochemical applications, and flame-retardant anti-corrosion coatings. - Explores the key applications of CBPCs including nuclear waste storage, oil-well cements, anticorrosion coatings and biomedical implants - Demystifies the chemistry, processes and production methods of CBPCs - Draws on 40 years of developments and applications in the field, including the latest developments from USA, Europe, Ukraine, Russia, China and India