Reacted and Activated Rubber (RAR)-Modified Dense-Graded Asphalt Mixtures: Design and Performance Evaluation
Reacted and Activated Rubber (RAR)-Modified Dense-Graded Asphalt Mixtures: Design and Performance Evaluation

Author: Sampat Kedarisetty

Publisher:

Published: 2018

Total Pages: 10

ISBN-13:

DOWNLOAD EBOOK

The modification of asphalt mixtures with rubber in the conventional process includes specialized equipment for mixing and storage and concurrently necessitates reheating prior to use. Reacted and Activated Rubber (RAR) is a novel rubber-based asphalt mixture modifier that can be added into the mixture matrix without the complexities associated with wet mixing. The objective of this study was to design and assess the performance of RAR-modified dense-graded asphalt mixtures against key pavement distresses. Furthermore, the performance of RAR-modified mixtures was compared to the unmodified and commercially available rubber-modified asphalt-based mixtures. Two levels of RAR dosage at 2 and 4 % by total weight of mix were included with two different base binders. Four performance characteristics were analyzed: resistance to rutting at high temperatures, failure by fatigue, fracture energy, and susceptibility to moisture damage. Increased rut resistance and higher fatigue lives were observed for higher RAR contents. Statistical analyses revealed insignificant changes in fracture energy among the different mixtures, and all the mixtures were found to be resistant to moisture damage. RAR was concluded as a compatible promising rubber modifier with a significant potential to improve resistance of asphalt pavements against distresses and capable of providing extended life cycles. Because RAR showed significant improvement in the performance of the dense-graded asphalt mixtures, this study recommended expanding the scope of utilizing the RAR materials with other aggregate gradations both at the laboratory and field levels in future.

Evaluation of Warm Mix Additives for Use in Modified Asphalt Mixtures
Evaluation of Warm Mix Additives for Use in Modified Asphalt Mixtures

Author: Rukesh Maharjan

Publisher:

Published: 2015

Total Pages: 332

ISBN-13:

DOWNLOAD EBOOK

The purpose of this research effort was to evaluate the use of warm-mix additives with modified (polymer-modified and terminal blend tire rubber) asphalt mixtures from Nevada and California. This research was completed in two stages: Sasobit and Advera were evaluated in first stage while Evotherm and Foaming were evaluated in second stage. The three main components of the experimental plan include: evaluation of mixture resistivity to moisture damage, pavement performance characteristics of the mixtures, and mechanistic analysis of the mixtures for simulated flexible pavement. The moisture resistivity of all mixtures were checked by Indirect Tensile Strength (ITS), and Dynamic Modulus (E*) tests. Dynamic Modulus Ratio (ECR) and Tensile Strength Ratio (TSR) were computed at multiple Freeze-Thaw (F-T) cycles for further evaluation of moisture sensitivity of mixtures. Flow Number (FN) and Flexural beam fatigue tests were conducted to evaluate the performance characteristics of WMA additives/technology. The terminal blend tire rubber-modified binder with lime treatment works effectively in resisting moisture damage, rutting, and to significantly-reasonably improve the fatigue life of the WMA Evotherm, Foaming, Advera and Sasobit mixtures. Hence, it is the best solution for the design and construction of sustainable asphalt pavements. The use of terminal blend rubberized asphalt binder is an excellent and economical selection in reducing tire waste and environmental impacts.

Functional Pavement Design
Functional Pavement Design

Author: Sandra Erkens

Publisher: CRC Press

Published: 2016-10-14

Total Pages: 212

ISBN-13: 1317285522

DOWNLOAD EBOOK

Functional Pavement Design is a collections of 186 papers from 27 different countries, which were presented at the 4th Chinese-European Workshops (CEW) on Functional Pavement Design (Delft, the Netherlands, 29 June-1 July 2016). The focus of the CEW series is on field tests, laboratory test methods and advanced analysis techniques, and cover analysis, material development and production, experimental characterization, design and construction of pavements. The main areas covered by the book include: - Flexible pavements - Pavement and bitumen - Pavement performance and LCCA - Pavement structures - Pavements and environment - Pavements and innovation - Rigid pavements - Safety - Traffic engineering Functional Pavement Design is for contributing to the establishment of a new generation of pavement design methodologies in which rational mechanics principles, advanced constitutive models and advanced material characterization techniques shall constitute the backbone of the design process. The book will be much of interest to professionals and academics in pavement engineering and related disciplines.

Evaluation of New Innovations in Rubber-modified Asphalt Binders and Rubberized Asphalt Mixes for Nevada DOT
Evaluation of New Innovations in Rubber-modified Asphalt Binders and Rubberized Asphalt Mixes for Nevada DOT

Author: Mehdi Khalili

Publisher:

Published: 2016

Total Pages: 156

ISBN-13:

DOWNLOAD EBOOK

The objective of the proposed research project is to determine the feasibility of utilization of laboratory blended ground tire rubber (GTR), terminally-blended GTR following Nevada Department of Transportation's (NDOT’s) specifications, or other crumb-rubber-modified (CRM) products to meet the rheological and engineering properties of asphalt modified binders and mixtures. The test results will be compared to styrene butadiene styrene (SBS) modified binders used in Nevada. The specific objectives of the research project will include the following: (1) Determining initial recommendations for terminally-blended GTR mix design guidelines based on the literature review and basic laboratory test results; (2) Investigating the rheological characteristics of various crumb rubber types (e. g. -30, -40, and terminal blend) at high, intermediate, and low performance temperatures through the performance of American Association of State Highway and Transportation Officials (AASHTO) standards and any other NDOT’s specification requirements; (3) Investigating the effects of various rubber modifiers on NDOT’s mix design including the mix volumetric properties such as air voids, voids in mineral aggregate (VMA), and optimum asphalt binder ratio specifications from AASHTO and NDOT; (4) Determining the Hveem stability, moisture susceptibility, permanent deformation, dynamic modulus, flow number characteristics of various alternate modifiers with hydrated lime in terms of specifications from AASHTO and NDOT; and (5) Developing recommended specifications for Nevada DOT regarding the utilization of these materials.

Mixture Desigh [sic] and Performance Prediction of Rubber-modified Asphalt in Ohio
Mixture Desigh [sic] and Performance Prediction of Rubber-modified Asphalt in Ohio

Author: Robert Y. Liang

Publisher:

Published: 1998

Total Pages: 278

ISBN-13:

DOWNLOAD EBOOK

The mixture design and performance characteristics of crumb rubber modified asphalt concretes were investigated in this research project to meet the requirements of the Intermodal Surface Transportation Efficiency Act (ISTEA) of 1991, which has required each State to incorporate scrap tire rubber into its asphalt paving materials. Specifically, the objectives of this research encompass the following: (i) investigation of the rheological properties of asphalt-rubber binder to determine optimum content of crumb rubber; (ii) development of optimum mix design for various applications, including both wet and dry mix processes; (iii) characterization of mechanical properties of recommended paving mixtures, including resilient modulus, fatigue cracking behavior, low-temperature thermal cracking resistance, water sensitivity test, incremental creep test and loaded wheel track test; and (iv) comparison of performance of selected paving mixes.

Uses of Recycled Rubber Tires in Highways
Uses of Recycled Rubber Tires in Highways

Author: Jon A. Epps

Publisher: Transportation Research Board

Published: 1994

Total Pages: 172

ISBN-13: 9780309053235

DOWNLOAD EBOOK

This synthesis on the use of recycled rubber tires in highways will be of interest to administrators and policy-makers; pavement, materials, geotechnical, environmental, and traffic operations engineers; and research engineers involved with highway design and construction issues. Information is provided on the uses of rubber tires in asphalt paving materials as well as other uses, such as on fills and embankments, for erosion control and on railroad grade crossings. Specifically, information is included which identifies the agencies using or implementing applications for recycled rubber tires and defines the design parameters, technical and construction limitations, performance, costs, benefits, environmental limitations, specifications, and availability. This synthesis of information defines the use of recycled rubber tires in highways and is based on a review of nearly 500 references and on information recorded from state highway agency responses to a 1991 survey of practice. Updates are included for as much of the state practice information possible through 1993. The use of scrap tires for highway applications is dynamic with regard to policy and technical issues. Therefore, the reader should keep in mind that the information presented reflects the best available data at a particular time. The synthesis also identifies current research in the topic area, critical research needs, and legislative issues that affect application and use of recycled rubber tires.

Advances in Frontier Research on Engineering Structures Volume 1
Advances in Frontier Research on Engineering Structures Volume 1

Author: Yang Yang

Publisher: CRC Press

Published: 2023-02-08

Total Pages: 747

ISBN-13: 1000835405

DOWNLOAD EBOOK

Advances in Frontier Research on Engineering Structures focuses on the research of advanced structures and anti-seismic design in civil engineering. The proceedings present the most cutting-edge research directions and achievements related to civil and structural engineering. Topics covered in the proceedings include: · Engineering Structure and Seismic Resistance · Structural Mechanics Analysis · Components and Materials · Structural Seismic Design · 3D Printing Concrete · Other Related Topics The works of this proceedings will promote development of civil and structural engineering, resource sharing, flexibility and high efficiency. Thereby, promote scientific information interchange between scholars from the top universities, research centers and high-tech enterprises working all around the world.

AASHTO Guide for Design of Pavement Structures, 1993
AASHTO Guide for Design of Pavement Structures, 1993

Author: American Association of State Highway and Transportation Officials

Publisher: AASHTO

Published: 1993

Total Pages: 622

ISBN-13: 1560510552

DOWNLOAD EBOOK

Design related project level pavement management - Economic evaluation of alternative pavement design strategies - Reliability / - Pavement design procedures for new construction or reconstruction : Design requirements - Highway pavement structural design - Low-volume road design / - Pavement design procedures for rehabilitation of existing pavements : Rehabilitation concepts - Guides for field data collection - Rehabilitation methods other than overlay - Rehabilitation methods with overlays / - Mechanistic-empirical design procedures.