Embedded Networking with CAN and CANopen
Embedded Networking with CAN and CANopen

Author: Olaf Pfeiffer

Publisher: Copperhill Media

Published: 2008

Total Pages: 555

ISBN-13: 0976511622

DOWNLOAD EBOOK

CAN (Controller Area Network) is a serial communication protocol that was originally developed for the automobile industry. CAN is far superior to conventional serial technologies such as RS232 in regards to functionality and reliability and yet CAN implementations are more cost effective. CANopen, a higher layer protocol based on CAN, provides the means to apply the ingenious CAN features to a variety of industrial-strength applications. Many users, for example in the field of medical engineering, opted for CANopen because they have to meet particularly stringent safety requirements. Similar requirements had to be considered by manufacturers of other equipment with very high safety or reliability requirements (e.g. robots, lifts and transportation systems). Providing a detailed look at both CAN and CANopen, this book examines those technologies in the context of embedded networks. There is an overview of general embedded networking and an introduction to the primary functionality provided by CANopen. Everything one needs to know to configure and operate a CANopen network using off-the-shelf components is described, along with details for those designers who want to build their own CANopen nodes. The wide variety of applications for CAN and CANopen is discussed, and instructions in developing embedded networks based on the protocol are included. In addition, references and examples using MicroCANopen, PCANopen Magic, and Vector's high-end development tools are provided.

CAN System Engineering
CAN System Engineering

Author: Wolfhard Lawrenz

Publisher: Springer Science & Business Media

Published: 2013-12-05

Total Pages: 375

ISBN-13: 1447156137

DOWNLOAD EBOOK

This book addresses the various challenges and open questions relating to CAN communication networks. Opening with a short introduction into the fundamentals of CAN, the book then examines the problems and solutions for the physical layout of networks, including EMC issues and topology layout. Additionally, a discussion of quality issues with a particular focus on test techniques is presented. Each chapter features a collection of illuminating insights and detailed technical information supplied by a selection of internationally-regarded experts from industry and academia. Features: presents thorough coverage of architectures, implementations and application of CAN transceiver, data link layer and so-called higher layer software; explains CAN EMC characteristics and countermeasures, as well as how to design CAN networks; demonstrates how to practically apply and test CAN systems; includes examples of real networks from diverse applications in automotive engineering, avionics, and home heating technology.

Embedded Software for the IoT
Embedded Software for the IoT

Author: Klaus Elk

Publisher: Walter de Gruyter GmbH & Co KG

Published: 2018-12-03

Total Pages: 367

ISBN-13: 1547401044

DOWNLOAD EBOOK

With a mixture of theory, examples, and well-integrated figures, Embedded Software for the IoT helps the reader understand the details in the technologies behind the devices used in the Internet of Things. It provides an overview of IoT, parameters of designing an embedded system, and good practice concerning code, version control and defect-tracking needed to build and maintain a connected embedded system. After presenting a discussion on the history of the internet and the word wide web the book introduces modern CPUs and operating systems. The author then delves into an in-depth view of core IoT domains including: Wired and wireless networking Digital filters Security in embedded and networked systems Statistical Process Control for Industry 4.0 This book will benefit software developers moving into the embedded realm as well as developers already working with embedded systems.

Multiplexed Networks for Embedded Systems
Multiplexed Networks for Embedded Systems

Author: Dominique Paret

Publisher: John Wiley & Sons

Published: 2007-06-13

Total Pages: 434

ISBN-13: 9780470511701

DOWNLOAD EBOOK

Multiplexed networks are essential for the unified, efficient and cost-effective exchange of electronic information within embedded component systems. This is especially important in automotive manufacturing as vehicles become increasingly reliant on robust electronic networks and systems for improved reliability, anti-lock brake systems (ABS), steering, on-board navigation systems, and much more. The latest systems such as X-by-Wire and FlexRay aim to produce faster, fault-tolerant network component interconnects, for state-of-the-art network implementation and safer, more reliable engineering of vehicular systems. This book provides a thorough and comprehensive introduction to automotive multiplexed network buses, covering the technical principles, components, implementation issues and applications. Key features: Presents a thorough coverage of the controller area network (CAN) protocol, including information on physical layers, conformity problems, hardware and software tools, and application layers. Gives a detailed description of the new local interconnect network (LIN) bus, setting out its developments, properties, problems and ways to overcome these. Examines the existing and emerging network buses such as time-triggered CAN (TTCAN), FlexRay and X-by-Wire. Explores the possibilities for linking the various buses that are discussed, explaining how the Fail-Safe-System basis chip (SBC) and other gateways are designed and constructed. Analyses wired and wireless internal and external serial links, including Safe-by-Wire plus, I2C, Media Oriented Systems Transport (MOST), remote keyless entry, tyre pressure monitoring systems (TPMS) and Bluetooth. A valuable guide to embedded systems for a range of applications, Multiplexed Networks for Embedded Systems: CAN, LIN, FlexRay, Safe-by-Wire...is essential reading for electronics engineers and researchers developing electronics for the automotive industry. It is also useful for practising aerospace engineers and other practitioners interested in the application of network technologies, and advanced students taking courses on automotive and embedded system design.

The Car Hacker's Handbook
The Car Hacker's Handbook

Author: Craig Smith

Publisher: No Starch Press

Published: 2016-03-01

Total Pages: 306

ISBN-13: 1593277709

DOWNLOAD EBOOK

Modern cars are more computerized than ever. Infotainment and navigation systems, Wi-Fi, automatic software updates, and other innovations aim to make driving more convenient. But vehicle technologies haven’t kept pace with today’s more hostile security environment, leaving millions vulnerable to attack. The Car Hacker’s Handbook will give you a deeper understanding of the computer systems and embedded software in modern vehicles. It begins by examining vulnerabilities and providing detailed explanations of communications over the CAN bus and between devices and systems. Then, once you have an understanding of a vehicle’s communication network, you’ll learn how to intercept data and perform specific hacks to track vehicles, unlock doors, glitch engines, flood communication, and more. With a focus on low-cost, open source hacking tools such as Metasploit, Wireshark, Kayak, can-utils, and ChipWhisperer, The Car Hacker’s Handbook will show you how to: –Build an accurate threat model for your vehicle –Reverse engineer the CAN bus to fake engine signals –Exploit vulnerabilities in diagnostic and data-logging systems –Hack the ECU and other firmware and embedded systems –Feed exploits through infotainment and vehicle-to-vehicle communication systems –Override factory settings with performance-tuning techniques –Build physical and virtual test benches to try out exploits safely If you’re curious about automotive security and have the urge to hack a two-ton computer, make The Car Hacker’s Handbook your first stop.

A Comprehensible Guide to Controller Area Network
A Comprehensible Guide to Controller Area Network

Author: Wilfried Voss

Publisher: Copperhill Media

Published: 2008

Total Pages: 148

ISBN-13: 0976511606

DOWNLOAD EBOOK

Controller Area Network (CAN) is a serial network technology that was originally designed for the automotive industry, but has also become a popular bus in industrial automation. The CAN bus is primarily used in embedded solutions and provides communication among microprocessors up to real-time requirements. A Comprehensible Guide To Controller Area Network represents a very thoroughly researched and complete work on CAN. It provides information on all CAN features and aspects combined with high level of readability. Book jacket.

A Comprehensible Guide to J1939
A Comprehensible Guide to J1939

Author: Wilfried Voss

Publisher: Copperhill Media Corporation

Published: 2008

Total Pages: 128

ISBN-13: 9780976511632

DOWNLOAD EBOOK

SAE J1939 has become the accepted industry standard and the vehicle network technology of choice for off-highway machines. This resource provides profound information on the J1939 message format and network management.

Programming Embedded Systems
Programming Embedded Systems

Author: Michael Barr

Publisher: "O'Reilly Media, Inc."

Published: 2006-10-11

Total Pages: 326

ISBN-13: 0596009836

DOWNLOAD EBOOK

Authored by two of the leading authorities in the field, this guide offers readers the knowledge and skills needed to achieve proficiency with embedded software.