Eco-efficient Masonry Bricks and Blocks

Eco-efficient Masonry Bricks and Blocks

Author: Fernando Pacheco-Torgal

Publisher: Woodhead Publishing

Published: 2014-11-27

Total Pages: 549

ISBN-13: 1782423184

DOWNLOAD EBOOK

Masonry walls constitute the interface between the building's interior and the outdoor environment. Masonry walls are traditionally composed of fired-clay bricks (solid or perforated) or blocks (concrete or earth-based), but in the past (and even in the present) they were often associated as needing an extra special thermal and acoustical insulation layer. However, over more recent years investigations on thermal and acoustical features has led to the development of new improved bricks and blocks that no longer need these insulation layers. Traditional masonry units (fired-clay bricks, concrete or earth-based blocks) that don't offer improved performance in terms of thermal and acoustical insulation are a symbol of a low-technology past, that are far removed from the demands of sustainable construction.This book provides an up-to-date state-of-the-art review on the eco-efficiency of masonry units, particular emphasis is placed on the design, properties, performance, durability and LCA of these materials. Since masonry units are also an excellent way to reuse bulk industrial waste the book will be important in the context of the Revised Waste Framework Directive 2008/98/EC which states that the minimum reuse and recycling targets for construction and demolition waste (CDW) should be at least 70% by 2020. On the 9th of March 2011 the European Union approved the Regulation (EU) 305/2011, known as the Construction Products Regulation (CPR) and it will be enforced after the 1st of July 2013. The future commercialization of construction materials in Europe makes their environmental assessment mandatory meaning that more information related to the environmental performance of building materials is much needed. - Provides an authoritative guide to the eco-efficiency of masonry units - Examines the reuse of waste materials - Covers a range of materials including, clay, cement, earth and pumice


Brick and Block Masonry - From Historical to Sustainable Masonry

Brick and Block Masonry - From Historical to Sustainable Masonry

Author: Jan Kubica

Publisher: CRC Press

Published: 2020-07-06

Total Pages: 1097

ISBN-13: 1000225577

DOWNLOAD EBOOK

Brick and Block Masonry - From Historical to Sustainable Masonry contains the keynote and semi-keynote lectures and all accepted regular papers presented online during the 17th International Brick and Block Masonry Conference IB2MaC (Kraków, Poland, July 5-8, 2020). Masonry is one of the oldest structures, with more than 6,000 years of history. However, it is still one of the most popular and traditional building materials, showing new and more attractive features and uses. Modern masonry, based on new and modified traditional materials and solutions, offers a higher quality of life, energy savings and more sustainable development. Hence, masonry became a more environmentally friendly building structure. Brick and Block Masonry - From Historical to Sustainable Masonry focuses on historical, current and new ideas related to masonry development, and will provide a very good platform for sharing knowledge and experiences, and for learning about new materials and technologies related to masonry structures. The book will be a valuable compendium of knowledge for researchers, representatives of industry and building management, for curators and conservators of monuments, and for students.


Brick and Block Masonry

Brick and Block Masonry

Author: John W. De Courcy

Publisher:

Published: 1988

Total Pages: 610

ISBN-13:

DOWNLOAD EBOOK

This text consists of proceedings of the Eighth International Brick and Block Masonry Conference, held in Trinity College, Dublin, Ireland, 19-21 September 1988.


Adobe Homes for All Climates

Adobe Homes for All Climates

Author: Lisa Schroder

Publisher: Chelsea Green Publishing

Published: 2010-09-06

Total Pages: 226

ISBN-13: 1603582827

DOWNLOAD EBOOK

The lay-up of adobe bricks is an easy, forgiving way to achieve a solid masonry-wall system. Contrary to stereotypes, adobe is perfectly adaptable for use in cold, wet climates as well as hot and dry ones, and for areas prone to earthquakes. With its efficient use of energy, natural resources for construction, and minimal effort for long-term maintenance, it’s clear that the humble adobe brick is an ideal option for constructing eco-friendly structures throughout the world. The book is ideal both for first-time do-it-yourselfers and for experienced adobe builders seeking to improve their craft. Drawing on the experience of more than fifty major adobe projects since 1993, Adobe Homes for All Climates describes Adobe Building Systems’ patented reinforcement and scaffolding systems, showing readers how to construct adobe homes more easily and safely, and with superior strength, durability, structural integrity, and aesthetic appeal, as compared to earthen homes of the past. All aspects of adobe construction are covered, including making and laying adobe bricks, installing lintels and arches, conduits and pipes, doors and windows, top plates and bondbeams, ideal wall dimensions, adobe finishes, and other adobe construction components, such as the inexpensive use of scaffolding. These methods will produce a premium product that will meet and often exceed inspection standards. Equipped with this manual, you will be able to obtain a building permit, make adobe bricks swiftly, and confidently lay them up. You will be able to beautifully finish your adobe walls with earth plasters creating stunning colors and outstanding light effects and create a beautiful, energy-efficient home that will last for generations to come.


The Fundamentals of Brick Manufacturing

The Fundamentals of Brick Manufacturing

Author: Md. Faruque Hossain

Publisher:

Published: 2020

Total Pages: 147

ISBN-13: 9781536172256

DOWNLOAD EBOOK

"Over the recent years, the brick industry of the state has been facing competition from several other building materials. These include cement and cement blocks. In most developing countries, brick makers make only a unique type and color of brick, leaving the user very little choice. As a result, substitute products enter the market which have the same function but are cheaper, more regular and pleasing in look. These substitutes satisfy the consumers more than bricks do. Although in general, the output of bricks is quite elastic, in the sense that increased construction activities are closely followed by an increase in brick production, the brick industry does have certain challenges posed by competition from substitutes. It is evident from the fore going discussion that bricks face stiff competition from alternative building materials. Therefore, in order to remain competitive, the clay brick industry will have to contain cost, increase module size, reduce mortar usage and improve ease of layering in order to retain and increase market share in the building and construction industry. Bricks in general are preferred, even if they are of low quality, because of their inherent and perceived characteristics of strength and moisture resistance. The industry will therefore have to emphasize if positive characteristics and options in order to compete with the alternative building materials which have a similar function. The brick industry, being ancillary to the construction industry, is intimately connected with the growth of the latter. Any attempts for market assessment should therefore focus on estimation of demand, supply and price position in the construction industry. There is little doubt that in the foreseeable future there will be an increasing demand for housing, particularly in cities and urban areas. To provide shelter for all, all construction sectors, including traditional sectors should be involved in providing affordable housing for the urban as well as the rural poor people. If these poorer sections of the population are to be assisted to build durable as well as affordable housing, the focus of attention will have to be placed on the provision of suitable and affordable building materials. Unfortunately it appears that in developing countries, the major thrust in the building materials industry has been placed on the more modern building materials. However, in most countries there is a need for cheap and good quality local building materials such as bricks, wood, bamboo etc. These are the materials most people of these countries can afford. If locally produced materials using local resources are utilized, which are often renewable, the cost will be low and income will be generated at the local level. Therefore, the development of the local building materials industry must receive close attention and utmost care. The objective of the local building materials industries should be not only to make available the materials traditionally used by the low income sections of the community but also to modify production processes and construction techniques to enable construction of houses which are structurally more durable and functionally more adequate. However, this books deals with brick manufacturing and its history details to provide updated information to the readers. Therefore, throughout the book, different authors present very interesting works related to the brick manufacturing in home and abroad. There is no doubt buyers will benefit by getting an excellent piece of this book"--


Brick and Block Masonry

Brick and Block Masonry

Author: Claudio Modena

Publisher: CRC Press

Published: 2016-11-03

Total Pages: 4087

ISBN-13: 1315342669

DOWNLOAD EBOOK

Brick and Block Masonry - Trends, Innovations and Challenges contains the lectures and regular papers presented at the 16th International Brick and Block Masonry Conference (Padova, Italy, 26-30 June 2016). The contributions cover major topics: - Analysis of masonry structures - Bond of composites to masonry - Building physics and durability - Case studies - Codes and standards - Conservation of historic buildings - Earthen constructions - Eco-materials and sustainability - Fire resistance, blasts, and impacts - Masonry bridges, arches and vaults - Masonry infill walls and RC frames - Masonry materials and testing - Masonry repair and strengthening - New construction techniques and technologies - Reinforced and confined masonry - Seismic performance and vulnerability assessment In an ever-changing world, in which innovations are rapidly implemented but soon surpassed, the challenge for masonry, the oldest and most traditional building material, is that it can address the increasingly pressing requirements of quality of living, safety, and sustainability. This abstracts volume and full paper USB device, focusing on challenges, innovations, trends and ideas related to masonry, in both research and building practice, will proof to be a valuable source of information for researchers and practitioners, masonry industries and building management authorities, construction professionals and educators.


Ecological and Health Effects of Building Materials

Ecological and Health Effects of Building Materials

Author: Junaid Ahmad Malik

Publisher: Springer Nature

Published: 2021-08-07

Total Pages: 590

ISBN-13: 3030760731

DOWNLOAD EBOOK

This book deals with the present adverse effects of using precarious building materials on the ecology and human health. Also, the detailed discussions on the novel and greener construction materials and their utilization as an alternative to the conventional harmful existing methods and materials are also presented in the subsequent chapters. This book helps to fill the research gaps in the existing prior-art knowledge in the field of sustainable construction and green building materials and methods giving due importance to ecology and health, specifically to the fields of sustainable structural engineering, sustainable geotechnical engineering, sustainable road engineering, etc. This book helps in achieving a sustainable environment through possible adoption of innovative and ecological construction practices. Hence, this book acts as a practical workbook, mainly for the academicians and practicing engineers who are willing to work toward the consecrated building industry. It is a well-established fact that the constructions of the engineering structures consume more and more earth resources than any other human activities in the world. In addition, the construction-related activities will produce several million tons of greenhouse gases, toxic emissions, water pollutants, and solid wastes. This creates a huge impact on environment and causes severe health issues on humans and animals. It is thus important to create an eco-friendly construction environment which can satisfy the ecological and health requirements.


Eco-efficient Repair and Rehabilitation of Concrete Infrastructures

Eco-efficient Repair and Rehabilitation of Concrete Infrastructures

Author: Fernando Pacheco-Torgal

Publisher: Woodhead Publishing

Published: 2017-11-15

Total Pages: 777

ISBN-13: 0081021828

DOWNLOAD EBOOK

Eco-efficient Repair and Rehabilitation of Concrete Infrastructures provides an updated state-of-the-art review on eco-efficient repair and rehabilitation of concrete infrastructure. The first section focuses on deterioration assessment methods, and includes chapters on stress wave assessment, ground-penetrating radar, monitoring of corrosion, SHM using acoustic emission and optical fiber sensors. Other sections discuss the development and application of several new innovative repair and rehabilitation materials, including geopolymer concrete, sulfoaluminate cement-based concrete, engineered cementitious composites (ECC) based concrete, bacteria-based concrete, concrete with encapsulated polyurethane, and concrete with super absorbent polymer (SAPs), amongst other topics. Final sections focus on crucial design aspects, such as quality control, including lifecycle and cost analysis with several related case studies on repair and rehabilitation. The book will be an essential reference resource for materials scientists, civil and structural engineers, architects, structural designers and contractors working in the construction industry. - Delivers the latest research findings with contributions from leading international experts - Provides fully updated information on the European standard on materials for concrete repair (EN 1504) - Includes an entire sections on the state-of-the-art in NDT, innovative repair and rehabilitation materials, as well as LCC and LCA information


Nearly Zero Energy Building Refurbishment

Nearly Zero Energy Building Refurbishment

Author: Fernando Pacheco Torgal

Publisher: Springer Science & Business Media

Published: 2013-10-22

Total Pages: 655

ISBN-13: 1447155238

DOWNLOAD EBOOK

The recast of the Energy Performance of Buildings Directive (EPBD) was adopted by the European Parliament and the Council of the European Union on 19 May 2010. For new buildings, the recast fixes 2020 as the deadline for all new buildings to be “nearly zero energy” (and even sooner for public buildings – by the end of 2018). This book gives practitioner an important tool to tackle the challenges of building refurbishment towards nearly zero energy. This book is welcome at this time and sets the scene for professionals whether practitioners or researchers to learn more about how we can make whether old or new buildings more efficient and effective in terms of energy performance.