Drilled Shaft Manual: Structural analysis and design for lateral loading by
Drilled Shaft Manual: Structural analysis and design for lateral loading by

Author: Lymon C. Reese

Publisher:

Published: 1977

Total Pages: 244

ISBN-13:

DOWNLOAD EBOOK

Drilled shafts have been used on a limited scale for many years as an alternative to driven piles in a variety of foundation problems. However, uncertainty about the behavior of the drilled shaft has forestalled widespread adoption. The subject package, by Dr. Lymon C. Reese of the University of Texas, is intended for use by bridge engineers, geotechnical engineers, and builders of pile foundations. The manual contains rational procedures and practical guidelines for the design and construction of drilled shaft foundations. Volume I presents a rational design procedure for drilled shafts under axial loading and includes guidelines on construction methods, inspection, load testing, specifications, and cost estimates. Volume II presents alternative methods for computing the response of the shaft to lateral loading and presents the structural design of the shaft for axial and/or lateral loading.

Drilled Shafts
Drilled Shafts

Author: National Highway Institute (U.S.)

Publisher:

Published: 1988

Total Pages: 608

ISBN-13:

DOWNLOAD EBOOK

This document was written as a resource for participants in a short course covering the topic of construction and design of drilled shaft foundations for bridges and other structures. It is the second edition of a Federal Highway Administration workbook on construction and design of drilled shafts. The first edition was written in 1988 (FHWA-SA-HI-88-042). While introductory material from the 1988 edition was retained, the emphasis in this document is on providing relatively comprehensive information for engineers who already have some experience with drilled shaft construction and/or design. The initial chapters cover an overview of the characteristics of drilled shafts, site investigations for drilled shafts (to collect information for both construction and design), and details of drilled shaft construction. These chapters are followed by several chapters on the design of drilled shafts in soil and rock for both axial and lateral loading, with examples. Both allowable stress design and load and resistance factor design principles are addressed. Details of design calculations procedures are provided in the appendices.

Deep Foundations on Bored and Auger Piles - BAP III
Deep Foundations on Bored and Auger Piles - BAP III

Author: W. Haegeman

Publisher: CRC Press

Published: 2020-09-29

Total Pages: 539

ISBN-13: 100010026X

DOWNLOAD EBOOK

This text presents findings from the 3rd International Geotechnical Seminar, held in Ghent, Belgium. Topics include: American experiences with large diameter bored piles; case histories; static, dynamic and pile integrity testing; and installation parameters and capacity of screwed piles.