This comprehensive handbook provides up-to-date knowledge and practical advice from established authorities in aerosol science. It covers the principles and practices of bioaerosol sampling, descriptions and comparisons of bioaerosol samplers, calibration methods, and assay techniques, with an emphasis on practicalities, such as which sampler to use and where it should be placed. The text also offers critiques concerning handling the samples to provide representative and meaningful assays for their viability, infectivity, and allergenicity. A wide range of microbes-viz., viruses, bacteria, fungi and pollens, and their fragments-are considered from such perspectives. Bioaerosols Handbook is divided into four parts, providing a wide-ranging reference work, as well as a practical guide on how best to sample and assay bioaerosols using current technology.
The threat of domestic terrorism today looms larger than ever. Bombings at the World Trade Center and Oklahoma City's Federal Building, as well as nerve gas attacks in Japan, have made it tragically obvious that American civilians must be ready for terrorist attacks. What do we need to know to help emergency and medical personnel prepare for these attacks? Chemical and Biological Terrorism identifies the R&D efforts needed to implement recommendations in key areas: pre-incident intelligence, detection and identification of chemical and biological agents, protective clothing and equipment, early recognition that a population has been covertly exposed to a pathogen, mass casualty decontamination and triage, use of vaccines and pharmaceuticals, and the psychological effects of terror. Specific objectives for computer software development are also identified. The book addresses the differences between a biological and chemical attack, the distinct challenges to the military and civilian medical communities, and other broader issues. This book will be of critical interest to anyone involved in civilian preparedness for terrorist attack: planners, administrators, responders, medical professionals, public health and emergency personnel, and technology designers and engineers.
Expanding far beyond its predecessor, this text offers a comprehensive guide to the assessment and control of bioaerosols in the full range of contemporary workplaces. Although the indoor environment remains a focus of concern, much of the information in this publication has application beyond office environments. The prominence of saprophytic microorganisms remains; however, more attention has been given to other important biological agents (e.g., arthropod and animal allergens, infectious agents, and microbial volatile organic compounds). In addition, fuller descriptions are provided for microbial toxins and cell wall components that may cause health effects
An introduction to the microbiology of bioaerosols and their impact on the world in which we live The microbiology of aerosols is an emerging field of research that lies at the interface of a variety of scientific and health-related disciplines. This eye-opening book synthesizes the current knowledge about microorganisms—bacteria, archaea, fungi, viruses—that are aloft in the atmosphere. The book is written collaboratively by an interdisciplinary and international panel of experts and carefully edited to provide a high-level overview of the emerging field of aerobiology. Four sections within Microbiology of Aerosols present the classical and online methods used for sampling and characterizing airborne microorganisms, their emission sources and short- to long-distance dispersal, their influence on atmospheric processes and clouds, and their consequences for human health and agro-ecosystems. Practical considerations are also discussed, including sampling techniques, an overview of the quantification and characterization of bioaerosols, transport of bioaerosols, and a summary of ongoing research opportunities in the field. Comprehensive in scope, the book: Explores this new field that is applicable to many disparate disciplines Covers the emission of bioaerosols to their deposit, covering both quantitative and qualitative aspects Provides insights into social and environmental effects of the presence of bioaerosols in the atmosphere Details the impact of bioaerosols on human health, animal and plant health, and on physical and chemical atmospheric processes Written by authors internationally recognized for their work on biological aerosols and originating from a variety of scientific fields collaborated on, Microbiology of Aerosols is an excellent resource for researchers and graduate or PhD students interested in atmospheric sciences or microbiology.
Aerosol Measurement: Principles, Techniques, and Applications Third Edition is the most detailed treatment available of the latest aerosol measurement methods. Drawing on the know-how of numerous expert contributors; it provides a solid grasp of measurement fundamentals and practices a wide variety of aerosol applications. This new edition is updated to address new and developing applications of aerosol measurement, including applications in environmental health, atmospheric science, climate change, air pollution, public health, nanotechnology, particle and powder technology, pharmaceutical research and development, clean room technology (integrated circuit manufacture), and nuclear waste management.
This book is intended to give technological background and practical examples, but also to give general insight into the on-going technology development in the area of biodetection. The content is therefore suitable for an array of stakeholders (decision makers, purchasing officers, etc.) and end-users of biodetection equipment within the areas of health, environment, safety and security, and military preparation. The book is divided into three sections. The first section discusses the fundamental physical and biological properties of bioaerosol's. The second section goes into more detail and discusses in-depth the most commonly used detection principles. The third section of the book is devoted to technologies that have been used in standoff applications. The last section of the book gives an overview of trends in bioaerosol detection. The reader of this book will gain knowledge about the different biodetection technologies and thus better judge their capabilities in relation to desired applications.
Surveys the origin of continents, and the accretion and breakup of supercontinents through earth history. This book also shows how these processes affected the composition of seawater, climate, and the evolution of life.
Provides comprehensive coverage of laser-induced ionization processes for mass spectrometry analysis Drawing on the expertise of the leading academic and industrial research groups involved in the development of photoionization methods for mass spectrometry, this reference for analytical scientists covers both the theory and current applications of photo-induced ionization processes. It places widely used techniques such as MALDI side by side with more specialist approaches such as REMPI and RIMS, and discusses leading edge developments in ultrashort laser pulse desorption, to give readers a complete picture of the state of the technology. Photoionization and Photo-Induced Processes in Mass Spectrometry: Fundamentals and Applications starts with a complete overview of the fundamentals of the technique, covering the basics of the gas phase ionization as well as those of laser desorption and ablation, pulse photoionization, and single particle ionization. Numerous application examples from different analytical fields are described that showcase the power and the wide scope of photo ionization in mass spectrometry. -The first general reference book on photoionization techniques for mass spectrometry -Examines technologies and applications of gas phase resonance-enhanced multiphoton ionization mass spectrometry (REMPI-MS) and gas phase resonance ionization mass spectrometry (RIMS) -Provides complete coverage of popular techniques like MALDI -Discusses the current and potential applications of each technology, focusing on process and environmental analysis Photoionization and Photo-Induced Processes in Mass Spectrometry: Fundamentals and Applications is an excellent book for spectroscopists, analytical chemists, photochemists, physical chemists, and laser specialists.
AEROSOL SCIENCE TECHNOLOGY AND APPLICATIONS Aerosols influence many areas of our daily life. They are at the core of environmental problems such as global warming, photochemical smog and poor air quality. They can also have diverse effects on human health, where exposure occurs in both outdoor and indoor environments. However, aerosols can have beneficial effects too; the delivery of drugs to the lungs, the delivery of fuels for combustion and the production of nanomaterials all rely on aerosols. Advances in particle measurement technologies have made it possible to take advantage of rapid changes in both particle size and concentration. Likewise, aerosols can now be produced in a controlled fashion. Reviewing many technological applications together with the current scientific status of aerosol modelling and measurements, this book includes: Satellite aerosol remote sensing The effects of aerosols on climate change Air pollution and health Pharmaceutical aerosols and pulmonary drug delivery Bioaerosols and hospital infections Particle emissions from vehicles The safety of emerging nanomaterials Radioactive aerosols: tracers of atmospheric processes With the importance of this topic brought to the public's attention after the eruption of the Icelandic volcano Eyjafjallajökull, this book provides a timely, concise and accessible overview of the many facets of aerosol science.
Ambient ionization has emerged as one of the hottest and fastest growing topics in mass spectrometry enabling sample analysis with minimal sample preparation. Introducing the subject and explaining the basic concepts and terminology, this book will provide a comprehensive, unique treatise devoted to the subject. Written by acknowledged experts, there are full descriptions on how new ionization techniques work, with an overview of their strengths, weaknesses and applications. This title will bring the reader right up to date, with both applications and theory, and will be suitable as a tutorial text for those starting in the field from a variety of disciplines.
