A guide to 4 documents, EN1991 Part 1.2, EN1992 Part 1.2, EN1993 Part 1.2 and EN1994 Part 1.2. It provides an introduction to the procedures required to achieve design solutions for a typical range of structural elements and assemblies. Worked examples are included to illustrate the use of the Eurocodes for specific design scenarios.
This text aims to provide the user with a commentary on the interpretation and use of EN 1991, Eurocode 1: Actions on structures - General actions - Part 1-4: Wind actions. This title also includes a commentary on the changes introduced in the UK National Annex.
Applies to the design of building and civil engineering structures in plain, reinforced and pre-stressed concrete. The code (for convenience referred to as EC2) is written in several parts: EN 1992 - 1 - 1; EN 1992 - 1 - 2; EN 1992 - 2; and EN 1992 - 3.
EN 1994-1-1, also known as Eurocode 4, is a standard of the Eurocode suite. This guide provides the user with guidance on the interpretation and use of EN 1994-1-1 through worked examples in relation to rules for buildings, structural fire design and for bridges. It is useful for civil and structural engineers, code-drafting committees, and more.
EN 1994-2 is one standard of the Eurocode suite & describes the principles & requirements for safety, serviceability & durability of composite steel & concrete bridges. This guide provides the user with guidance on the interpretation & use of EN 1994-2 through worked examples in relation to the general rules & the rules for bridges.
Structural Design of Buildings: Fundamentals in Design, Management and Sustainability is essential reference for all structural engineers designing buildings and other structures. The book forms part of the Structural Design of Buildings series covering key issues that design professionals face at the outset of a project.
- General - Requirements - Principles of limit state design - Basic variables - Structural analysis and design assisted by testing - Verification by the partial factor method - Annex A1 (normative) - Application for buildings - Management of structural reliability for construction works - Basis for partial factor design and reliability analysis - Design assisted by testing - Appendix A: The Construction Products Directive (89/106/EEC) - Appendix B: The Eurocode Suite - Appendix C: Basic statistical terms and techniques - Appendix D: National standard organizations
&Quot;After some 25 years in preparation the key parts of EN 1993-1-1 Eurocode 3: Design of steel structures General rules and rules for buildings have now been finalised. Eurocode 3 covers many forms of steel construction and provides the most comprehensive and up-to-date set of design guidance currently available.". "Throughout, this book concentrates on the most commonly encountered aspects of structural steel design, with an emphasis on the situation in buildings. Much of its content is therefore devoted to the provisions of the Part 1.1: General rules and rules for buildings of EN 1993. This is, however, supplemented by material on loading, joints and cold-formed design. For each of the principal aspects covered, the book provides background to the structural behaviour, explanation of the codified treatment including departure from existing practice (BS 5950), and numerous worked examples. This Guide should serve as the primary point of reference for designing steel structures to Eurocode 3."--BOOK JACKET.
Annotation - Basis of design - Materials - Durability - Structural analysis - Ultimate limit states - Serviceability limit states - Detailing of reinforcement and prestressing tendons - Detailing for members and particular rules - Additional rules for precast concrete structures - Design for the execution stages.
Covers EN1998-1 (General Rules, seismic actions and rules for buildings) and EN1998-5 (Foundations, retaining structures, geotechnical aspects). This book is useful for Civil and Structural Engineers, Code-drafting committees, Clients, Structural Design students, and Public authorities.
