TRB’s National Cooperative Highway Research Program (NCHRP) 415: Design Fires in Road Tunnels information on the state of the practice of design fires in road tunnels, focusing on tunnel fire dynamics and the means of fire management for design guidance.
"TRB's National Cooperative Highway Research Program (NCHRP) Research Report 836: Guidelines for Emergency Ventilation Smoke Control in Roadway Tunnels presents guidelines for ventilation in roadway tunnels to facilitate human evacuation and emergency responder safety. These guidelines consider tunnel geometrics such as tunnel altitude; physical dimensions (i.e., length, cross section); type of traffic flow (i.e., single or bi-directional flow); and fan utilization and placement. They also consider cargo types and quantities as they pertain to fire heat release rates (FHRRs) and ventilation requirements. The guidelines determine the effects of ventilation on tunnel fires including fire size, and the interaction of firefighting and ventilation system operation. " -- Publisher description
This book illustrates a new quantitative risk analysis model for road tunnels that is capable of evaluating the role of infrastructure measures, equipment and management procedures as prescribed by EU Directive 2004/54/EC. The risk assessment draws on the typical F-N curves of societal risk, evaluated with the help of event tree analysis, vehicle queue formation dynamics, and users’ egress and tenability models. In addition, the model considers the reliability of the safety measures. The work provides essential guidance on the following aspects: how a quantitative model can be implemented to evaluate risk in road tunnels; how to build an event tree for the accident scenarios considered; how to simulate the vehicle queue formation; how to simulate the evolution of accident scenarios; and how to simulate the users’ egress. Given its scope and depth of coverage, the book will be of interest to all engineers whose work involves fire protection and safety in tunnels, all persons engaged in safety and transport engineering or risk analysis for road tunnels, as well as public and private bodies involved in the application of Directive 2004/54/EC.
Tunnel engineering is one of the oldest, most interesting but also challenging engineering disciplines and demands not only theoretical knowledge but also practical experience in geology, geomechanics, structural design, concrete construction, machine technology, construction process technology and construction management. The two-volume "Handbuch des Tunnel- und Stollenbaus" has been the standard reference work for German-speaking tunnellers in theory and practice for 30 years. The new English edition is based on a revised and adapted version of the third German edition and reflects the latest state of knowledge. The book is published in two volumes, with the second volume covering both theoretical themes like design basics, geological engineering, structural design of tunnels and monitoring instrumentation, and also the practical side of work on the construction site such as dewatering, waterproofing and scheduling as well as questions of tendering, award and contracts, data management and process controlling. As with volume I, all chapters include practical examples.
The ventilation system is an important element for the safety of a tunnel, as well as its investment and operating costs. Investors, operators and designers of road tunnels bear a responsibility for the safety of persons, as well as for important investment decisions. The new Road Tunnel Ventilation Compendium fosters understanding of basic aspects of ventilation in the context of tunnel safety, describes the actual state of the art and shows how to design and realise safer tunnels, at lower costs, with reliably functioning systems.
"The increased use of underground space for transportation systems and the increasing complexity and constraints of constructing and maintaining above ground transportation infrastructure have prompted the need to develop this technical manual. This FHWA manual is intended to be a single-source technical manual providing guidelines for planning, design, construction and rehabilitation of road tunnels, and encompasses various types of road tunnels"--P. ix.
Immersed tunnels have been around for more than a century but remain a relatively unknown form of tunnel construction. For waterway crossings they are an effective alternative to bored tunnels and bridges, particularly in shallower waters, soft alluvial soils, and earthquake-prone areas. Successful implementation requires a thorough understanding of a wide variety of civil engineering disciplines and construction techniques. Immersed Tunnels brings together in one volume all aspects of immersed tunnels from initial feasibility and planning, through design and construction, to operation and maintenance. Get Valuable Insights into Immersed Tunnel Engineering from Expert Practitioners The book presents design and construction principles to give a full appreciation not only of what is involved in an immersed tunnel scheme but also how potential problems are dealt with and overcome. It examines important factors that have to be considered, particularly environmental implications and mechanical and electrical systems. It also gives practical examples of how specific techniques have been used in various projects and highlights issues that designers and constructors should be aware of. In addition, the book discusses operation and maintenance and reviews contractual matters. These aspects are described from the viewpoint of two experienced practitioners in the field who have a wealth of experience on immersed tunnel projects worldwide. As tunnels are increasingly being adopted as engineering solutions around the world, this unique and extensively illustrated reference explores the wide variety of immersed tunnel techniques available to designers and constructors. It provides essential insight for anyone involved, or seeking to be involved, with immersed tunnel projects.
Share our experiences, our successes and failures, and our ideas and dreams, all with the goal of getting better at the work we love: building tunnels. Every two years, industry leaders and practitioners from around the world gather at the Rapid Excavation and Tunneling Conference (RETC), the authoritative program for the tunneling profession, to learn about the most recent advances and breakthroughs in this unique field. The information presented helps professionals keep pace with the ever-changing and growing tunneling industry. This book includes the full text of 111 papers presented at the 2019 conference covering such topics as contracting practices, design and planning, geotechnical considerations, hard-rock tunnel boring machines, new and innovative technologies, pressure-face TBM case histories, and tunneling for sustainability. The papers will inform, challenge, and stimulate each reader.