CRASH3 User's Guide and Technical Manual
Author:
Publisher:
Published: 1981
Total Pages: 238
ISBN-13:
DOWNLOAD EBOOKPosts
Automotive Accident Reconstruction
Author: Donald E. Struble
Publisher: CRC Press
Published: 2020-01-24
Total Pages: 622
ISBN-13: 1000764745
DOWNLOAD EBOOKThis fully updated edition presents practices and principles applicable for the reconstruction of automobile and commercial truck crashes. Like the First Edition, it starts at the very beginning with fundamental principles, information sources, and data gathering and inspection techniques for accident scenes and vehicles. It goes on to show how to analyze photographs and crash test data. The book presents tire fundamentals and shows how to use them in spreadsheet-based reverse trajectory analysis. Such methods are also applied to reconstructing rollover crashes. Impacts with narrow fixed objects are discussed. Impact mechanics, structural dynamics, and conservation-based reconstruction methods are presented. The book contains a comprehensive treatment of crush energy and how to develop structural stiffness properties from crash test data. Computer simulations are reviewed and discussed. Extensively revised, this edition contains new material on side pole impacts. It has entirely new chapters devoted to low-speed impacts, downloading electronic data from vehicles, deriving structural stiffness in side impacts, and incorporating electronic data into accident reconstructions
Crash Reconstruction Research
Author: Michael S Varat
Publisher: SAE International
Published: 2008-03-17
Total Pages: 770
ISBN-13: 0768097142
DOWNLOAD EBOOKThe science of crash reconstruction enables engineers to determine the most probable scenario for how and why traffic collisions occur. Ongoing research has continually enhanced crash reconstructionists' knowledge of the application of physical laws in this field. Crash Reconstruction Research: 20 Years of Progress (1988-2007) features 47 papers that have presented significant steps forward, focusing on the following areas within the field of crash reconstruction that have experienced major advances: Planar Impact Mechanics Stiffness Modeling Crash Pulse Analysis Structural Restitution Lateral Deformation and Override/Underride BEV v. Delta-V Rear and Side Impacts Pole Impacts Uncertainty Analysis Pedestrian Crashes Braking Performance
CRASH2 Maintenance: Description of results
Author: Tim Oppenheim
Publisher:
Published: 1981
Total Pages: 266
ISBN-13:
DOWNLOAD EBOOKHandbook of Biomedical Engineering
Author: Jacob Kline
Publisher: Elsevier
Published: 2012-12-02
Total Pages: 754
ISBN-13: 0323142680
DOWNLOAD EBOOKHandbook of Biomedical Engineering covers the most important used systems and materials in biomedical engineering. This book is organized into six parts: Biomedical Instrumentation and Devices, Medical Imaging, Computers in Medicine, Biomaterials and Biomechanics, Clinical Engineering, and Engineering in Physiological Systems Analysis. These parts encompassing 27 chapters cover the basic principles, design data and criteria, and applications and their medical and/or biological relationships. Part I deals with the principles, mode of operation, and uses of various biomedical instruments and devices, including transducers, electrocardiograph, implantable electrical devices, biotelemetry, patient monitoring systems, hearing aids, and implantable insulin delivery systems. Parts II and III describe the basic principle of medical imaging devices and the application of computers in medicine, particularly in the fields of data management, critical care, clinical laboratory, radiology, artificial intelligence, and research. Part IV focuses on the application of biomaterials and biomechanics in orthopedic and accident investigation, while Part V considers the major functions of clinical engineering. Part VI provides the principles and application of mathematical models in physiological systems analysis. This book is valuable as a general reference for courses in a biomedical engineering curriculum.
Automotive Accident Reconstruction
Author: Ph.D., Donald E. Struble
Publisher: CRC Press
Published: 2013-09-24
Total Pages: 466
ISBN-13: 1466588381
DOWNLOAD EBOOKAutomotive Accident Reconstruction: Practices and Principles introduces techniques for gathering information and interpreting evidence, and presents computer-based tools for analyzing crashes. This book provides theory, information and data sources, techniques of investigation, an interpretation of physical evidence, and practical tips for beginner
Vehicle Accident Analysis and Reconstruction Methods
Author: Matthew Brach
Publisher: SAE International
Published: 2022-01-07
Total Pages: 598
ISBN-13: 1468603450
DOWNLOAD EBOOKIn this third edition of Vehicle Accident Analysis & Reconstruction Methods, Raymond M. Brach and R. Matthew Brach have expanded and updated their essential work for professionals in the field of accident reconstruction. Most accidents can be reconstructed effectively using of calculations and investigative and experimental data: the authors present the latest scientific, engineering, and mathematical reconstruction methods, providing a firm scientific foundation for practitioners. Accidents that cannot be reconstructed using the methods in this book are rare. In recent decades, the field of crash reconstruction has been transformed through the use of technology. The advent of event data records (EDRs) on vehicles signaled the era of modern crash reconstruction, which utilizes the same physical evidence that was previously available as well as electronic data that are measured/captured before, during, and after the collision. There is increased demand for more professional and accurate reconstruction as more crash data is available from vehicle sensors. The third edition of this essential work includes a new chapter on the use of EDRs as well as examples using EDR data in accident reconstruction. Early chapters feature foundational material that is necessary for the understanding of vehicle collisions and vehicle motion; later chapters present applications of the methods and include example reconstructions. As a result, Vehicle Accident Analysis & Reconstruction Methods remains the definitive resource in accident reconstruction.
Heavy Vehicle Accident Reconstruction
Author: Christopher D Armstrong
Publisher: SAE International
Published: 2018-11-02
Total Pages: 406
ISBN-13: 0768092027
DOWNLOAD EBOOKThe last ten years have seen explosive growth in the technology available to the collision analyst, changing the way reconstruction is practiced in fundamental ways. The greatest technological advances for the crash reconstruction community have come in the realms of photogrammetry and digital media analysis. The widespread use of scanning technology has facilitated the implementation of powerful new tools to digitize forensic data, create 3D models and visualize and analyze crash vehicles and environments. The introduction of unmanned aerial systems and standardization of crash data recorders to the crash reconstruction community have enhanced the ability of a crash analyst to visualize and model the components of a crash reconstruction. Because of the technological changes occurring in the industry, many SAE papers have been written to address the validation and use of new tools for collision reconstruction. Collision Reconstruction Methodologies Volumes 1-12 bring together seminal SAE technical papers surrounding advancements in the crash reconstruction field. Topics featured in the series include: • Night Vision Study and Photogrammetry • Vehicle Event Data Recorders • Motorcycle, Heavy Vehicle, Bicycle and Pedestrian Accident Reconstruction The goal is to provide the latest technologies and methodologies being introduced into collision reconstruction - appealing to crash analysts, consultants and safety engineers alike.
Vehicle Compatibility in Automotive Crashes
Author: Stanley H Backaitis
Publisher: SAE International
Published: 2005-03-29
Total Pages: 519
ISBN-13: 0768095980
DOWNLOAD EBOOKFor years, reducing the number of traffic-related fatalities and injuries has been a major problem throughout the world. Today, it has gained much more momentum in view of rapidly increasing SUV, van, and light-truck populations relative to the number of passenger cars, and due to significant improvements in technologies that facilitate a better understanding of the interaction dynamics among widely differing size vehicles. Unless disparities in crashworthiness among vehicles of different masses, sizes, and structural characteristics in mixed crash environments are successfully taken into account, the challenge toward improved vehicle safety will continue. This two-part compendium provides the most comprehensive information available on the entire spectrum of vehicle crash compatibility. The first part presents oral comments captured from the 2003 SAE World Congress panel discussion on compatibility. The panel of leading experts representing industry, academia, and government provides a rough framework and a broad range of views on current and emerging developments in compatibility research. The second part of this compendium features 44 best technical papers from SAE International and the International Technical Conference on the Enhanced Safety of Vehicles, published from the early 1970s through 2004. Readers will get a feel for the direction passenger car and heavy-vehicle manufacturers, research institutions, infrastructure suppliers, insurers, and governments are taking to reduce the number of traffic fatalities and injuries.
Accidental Injury
Author: Alan M. Nahum
Publisher: Springer Science & Business Media
Published: 2013-03-09
Total Pages: 585
ISBN-13: 1475722648
DOWNLOAD EBOOKWriting on accidental injury often seems to occur from one of two perspec tives. One perspective is that of those involved in aspects of injury diagnosis and treatment and the other is that of those in the engineering and biologic sciences who discuss mechanical principles and simulations. From our point of view, significant information problems exist at the inter face: Persons in the business of diagnosis and treatment do not know how to access, use, and evaluate theoretical information that does not have obvious practical applications; persons on the theoretical side do not have enough real life field data with which to identify problems or to evaluate solutions. The ideal system provides a constant two-way flow of data that permits continuous problem identification and course correction. This book attempts to provide a state-of-the-art look at the applied bio mechanics of accidental-injury causation and prevention. The authors are recognized authorities in their specialized fields. It is hoped that this book will stimulate more applied research in the field of accidental-injury causation and prevention. Alan M. Nahum John W. Melvin vii Contents Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . vii . . . . . . . . . . . . . . . . . Contributors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi . . . . . . . . . . . . . . . . . Chapter 1 The Application of Biomechanics to the Understanding of Injury and Healing .................................. 1 Y. C. Fung Chapter 2 Instrumentation in Experimental Design . . . . . . . . . .. . . . 12 . . Warren N. Hardy Chapter 3 The Use of Public Crash Data in Biomechanical Research 49 Charles P. Compton Chapter 4 Anthropomorphic Test Devices. . . . . . . . . . . . . . . .. . . 66 . . . . . Harold J. Mertz Chapter 5 Radiologic Analysis of Trauma . . . . . . . . . . . . . . . .. . . 85 . . . . .
