This document serves as the Reference Manual for the 1 1/2 -day FHWA workshop on concrete pavement preservation. The purpose of the document is to provide the most up-to-date information available on the design, construction, and selection of cost-effective concrete pavement preservation strategies. It concentrates primarily on strategies and methods that are applicable at the project level, and not at the network level, where pavement management activities function and address such issues as prioritizing and budgeting. Detailed information is presented on seven specific concrete pavement preservation treatments: slab stabilization, partial-depth repairs, full-depth repairs, retrofitted edge drains, load transfer restoration, diamond grinding, and joint resealing. In addition, information is provided on pavement evaluation techniques and strategy selection procedures.
This report contains all of the papers presented at a workshop on Continuously Reinforced Concrete Pavements (CRCP) which was held in New Orleans, Louisiana. The information presented at the workshop covered all aspects of CRCP including design, construction, and maintenance procedures. The primary emphasis was concentrated on maintenance procedures. The proceedings include papers on polymer patching, under sealing, and flexible and rigid overlays.
This document provides valuable guidance and information on the selection, design, and construction of cost-effective concrete pavement preservation treatments. It is based on a document prepared in 2008 but has been revised and expanded to include updated information to assist highway agencies in effectively managing their concrete pavement network through the application of timely and effective preservation treatments. The preservation approach typically uses low-cost, minimally invasive techniques to improve the overall condition of the pavement. In addition to several introductory chapters covering pavement preservation concepts and pavement evaluation, eight chapters on specific concrete pavement preservation treatments are included: slab stabilization, partial-depth repairs, full-depth repairs, retrofitted edge drains, load transfer restoration, diamond grinding, joint resealing, and concrete overlays. Each of these chapters discusses the purpose of each treatment, its limitations and effectiveness, material and design considerations, construction recommendations, and quality assurance/troubleshooting information. In addition, a final chapter is included on strategy selection procedures.
This Strategic Highway Research Program (SHRP) report is a training supplement for material in "Pavement Maintenance Effectiveness" (SHRP-H-358) and "Development of a Procedure to Rate the Application of Pavement Maintenance Treatments" (SHRP-H-322). This report suggests some immediate improvements in current pavement maintenance techniques, such as chip seals, slurry seals, crack sealing in asphalt pavement; and undersealing, and joint and crack sealing in Portland Cement concrete pavements. Researchers request that highway maintenance departments continue to track and log pavement maintenance data.
Contains 47 of the 49 papers presented at the workshop. Covers recycling, overlay design, relief joints, load transfer and drainage, life cycle costs, traffic loading, traffic control and maintenance. In addition national rehabilitation policies, perspectives of industry and ongoing research were discussed.
This research project strives to help the Iowa Department of Transportation (DOT) fully achieve the full benefits of pavement preservation through training on proper selection, design, and application of pavement preservation treatments. In some cases, there is a lack of training when conducting one of these steps and the objective of applying pavement preservation techniques is compromised. Extensive amounts of literature on pavement preservation exist, but a structured approach on how to train staff in selecting, designing, and applying pavement preservation techniques is lacking. The objective of this project was to develop a training-oriented learning management system to address pavement preservation treatments (chip seals, fog seals, slurry systems, and crack seals and fills) as they are dealt with during the phases of selection, design, and construction. Early in the project, it was critical to identify the staff divisions to be trained and the treatments to be included. Through several meetings with the Iowa DOT, three staff divisions were identified: maintenance staff (in charge of selection), design staff, and construction staff. In addition, the treatments listed above were identified as the focus of the study due to their common use. Through needs analysis questionnaires and meetings, the knowledge gap and training needs of the agency were identified. The training modules developed target the gap from the results of the needs analysis. The concepting (selection) training focuses on providing the tools necessary to help make proper treatment selection. The design training focuses on providing the information necessary on the treatment materials (mostly binders and aggregates) and how to make proper material selection. Finally, the construction training focuses on providing equipment calibration procedures, inspection responsibilities, and images of poor and best practices. The research showed that it is important to train each division staff (maintenance, design, and construction) separately, as each staff division has its own needs and interests. It was also preferred that each treatment was covered on an individual basis. As a result of the research, it is recommended to evaluate the performance of pavement preservation treatments pre- and post-training continuously to compare results and verify the effectiveness of the learning management system.
