Computer Methods and Experimental Measurements for Surface Effects and Contact Mechanics VIII
Computer Methods and Experimental Measurements for Surface Effects and Contact Mechanics VIII

Author: J. T. M. de Hosson

Publisher: WIT Press

Published: 2007

Total Pages: 353

ISBN-13: 184564073X

DOWNLOAD EBOOK

The importance of contact and surface problems in modern engineering and their combined effects has led to the Eighth International Conference on Computer Methods and Experimental Measurements for Surface and Contact Mechanics. Nowadays the importance of contact and surface problems in many technological fields is well understood: they are complex and inherently non-linear due to their moving boundaries and the different properties of materials, particularly along the contact surfaces. Structural components fail from wear, corrosion, high cycle fatigue etc., that is to say affected and initiated by the surface conditions. The use of surface treatments can reduce the cost of components and extend the life of the elements. Their effect is of particular importance in the case of surfaces undergoing contact, a problem which is addressed throughout the book. Topics featured: Surface Treatment; Surface problems in Contact Mechanics; Fracture Mechanics; Coupled analysis and experiments; Thin Coatings; Thick Coatings; Contact Mechanics; Material Surface in Contact; Applications and Case Studies.

Computational Methods and Experiments in Materials Characterization III
Computational Methods and Experiments in Materials Characterization III

Author: C. A. Brebbia

Publisher: WIT Press

Published: 2007

Total Pages: 465

ISBN-13: 1845640802

DOWNLOAD EBOOK

Until recently, engineering materials could be characterized successfully using relatively simple testing procedures. As materials technology advances, interest is growing in materials possessing complex meso-, micro- and nano-structures, which to a large extent determine their physical properties and behaviour. The purposes of materials modelling are many: optimization, investigation of failure, simulation of production processes, to name but a few. Modelling and characterisation are closely intertwined, increasingly so as the complexity of the material increases. Characterisation, in essence, is the connection between the abstract material model and the real-world behaviour of the material in question. Characterisation of complex materials therefore may require a combination of experimental techniques and computation. This book publishes papers presented at the Third International Conference on Computational Methods and Experiments in Material Characterisation.Topics covered include: Composites; Ceramics; Alloys; Cements and Cement Based Materials; Biomaterials; Thin Films and Coatings; Advanced Materials; Imaging Analysis; Thermal Analysis; New Methods; Surface Chemistry, Nano Indentation; Continuum Methods; Particle Models; Damage Mechanics; Innovative Techniques; Stochastic Methods.

Simulation of Electrochemical Processes II
Simulation of Electrochemical Processes II

Author: V.G. DeGiorgi

Publisher: WIT Press

Published: 2007-04-10

Total Pages: 369

ISBN-13: 1845640713

DOWNLOAD EBOOK

This book contains papers presented at the Second International Conference in this successful series, which presents and discusses the state-of-the-art on the computer simulation of corrosion, electrochemical processes and the electrical and electromagnetic fields associated with them.Modern industry applies a wide range of electrochemical processes to protect against corrosion, provide surface treatments and to manufacture products. This book focuses on the computer modelling of these industrial processes and techniques by examining the developments of computational models and their application in practice.Featured topics include: Cathodic Protection Systems; Modelling Methodologies; Electrodeposition and Electroforming; Modelling of Coatings; Modelling Stress Corrosion, Cracking and Corrosion Fatigue; Modelling and Corrosion of Surface Coatings; Interference and Signature Control; Anodic Protection; Electrocoating and Plating; Optimisation of Control Systems; Detection and Monitoring of Corrosion; Measurement Techniques; Fuel on Photovoltaic Cells; Electrolysis Reactors; Comparison of Experimental Measurements and Computer results, Case Studies.

Advances in Mechanics: Theoretical, Computational and Interdisciplinary Issues
Advances in Mechanics: Theoretical, Computational and Interdisciplinary Issues

Author: Michal Kleiber

Publisher: CRC Press

Published: 2016-05-05

Total Pages: 650

ISBN-13: 1315645068

DOWNLOAD EBOOK

Advances in Mechanics: Theoretical, Computational and Interdisciplinary Issues covers the domain of theoretical, experimental and computational mechanics as well as interdisciplinary issues, such as industrial applications. Special attention is paid to the theoretical background and practical applications of computational mechanics.This volume

Advances in Laser Materials Processing
Advances in Laser Materials Processing

Author: Jonathan R. Lawrence

Publisher: Elsevier

Published: 2010-07-27

Total Pages: 865

ISBN-13: 1845699815

DOWNLOAD EBOOK

Because of its capacity for continuous development and flexibility of use, the laser has become a mainstream manufacturing tool in many industrial sectors. This timely book relays the state-of-the-art in laser materials processing technology and applications and likely advances to be made from current research taking place around the world. The book also promotes appreciation for laser applications in a variety of industrial sectors.After two introductory chapters, the book reviews the main areas of laser processing. Starting with laser cutting and machining, the book discusses laser welding, annealing and hardening. It then considers surface treatment, coating and materials deposition as well as other engineering techniques such as peening and net-shape engineering, before discussing laser micro and nano-fabrication techniques. The book concludes by looking at modelling and process control.With its distinguished editorial team and contributions from renowned researchers working in every corner of the globe, Advances in laser materials processing provides a comprehensive yet detailed coverage of the many topics that comprise the field of laser materials processing. It provides a reference source for the scientists and engineers in such areas as metals processing and microelectronics, as well those conducting laser materials processing research in either academia or industry. - A comprehensive practitioner guide and reference work explaining state-of-the-art laser processing technologies in manufacturing and other disciplines - Explores the challenges, potential and future directions through the continuous development of new, application-specific lasers in materials processing - Discusses coatings and material deposition with lasers with including the production of coatings by laser-assisted processes, laser direct metal deposition and laser induced forward transfer (LIFT)

Computational Methods and Experimental Measurements XIII
Computational Methods and Experimental Measurements XIII

Author: C. A. Brebbia

Publisher: WIT Press

Published: 2007

Total Pages: 929

ISBN-13: 1845640845

DOWNLOAD EBOOK

Containing papers presented at the Thirteenth International Conference in this well established series on (CMEM) Computational Methods and Experimental Measurements. These proceedings review state-of-the-art developments on the interaction between numerical methods and experimental measurements.Featured topics include: Computational and Experimental Methods; Experimental and Computaqional Analysis; Computer Interaction and Control of Experiments; Direct, Indirect and In-Situ Measurements; Particle Methods; Structural and Stress Analysis; Structural Dynamics; Dynamics and Vibrations; Electrical and Electromagnetic Applications; Biomedical Applications; Heat Transfer; Thermal Processes; Fluid Flow; Data Acquisition; Remediation and Processing and Industrial Applications.

Computer Methods and Experimental Measurements for Surface Effects and Contact Mechanics VII
Computer Methods and Experimental Measurements for Surface Effects and Contact Mechanics VII

Author: J. T. M. de Hosson

Publisher: Computational Mechanics

Published: 2005

Total Pages: 424

ISBN-13: 9781845640224

DOWNLOAD EBOOK

The research activities in the field of surface engineering have been greatly driven by the realization that the surface is usually the most important part of any engineering component. The scientific research featured deals with fundamental and applied concepts of surface engineering, in particular focusing on the interplay between applied physics, materials science and engineering, computational mechanics and mechanical engineering. The book is devoted to fundamental and applied studies of four interconnected aspects: processing, microstructural features, functional performance as well as the design of an appropriate theoretical and predictive framework of protective surfaces.

Multi-body Dynamic Modeling of Multi-legged Robots
Multi-body Dynamic Modeling of Multi-legged Robots

Author: Abhijit Mahapatra

Publisher: Springer Nature

Published: 2020-02-27

Total Pages: 230

ISBN-13: 9811529531

DOWNLOAD EBOOK

This book describes the development of an integrated approach for generating the path and gait of realistic hexapod robotic systems. It discusses in detail locomation with straight-ahead, crab and turning motion capabilities in varying terrains, like sloping surfaces, staircases, and various user-defined rough terrains. It also presents computer simulations and validation using Virtual Prototyping (VP) tools and real-world experiments. The book also explores improving solutions by applying the developed nonlinear, constrained inverse dynamics model of the system formulated as a coupled dynamical problem based on the Newton–Euler (NE) approach and taking into account realistic environmental conditions. The approach is developed on the basis of rigid multi-body modelling and the concept that there is no change in the configuration of the system in the short time span of collisions.

Computational Methods and Experimental Measurements XV
Computational Methods and Experimental Measurements XV

Author: G. M. Carlomagno

Publisher: WIT Press

Published: 2011

Total Pages: 737

ISBN-13: 1845645405

DOWNLOAD EBOOK

Containing edited versions of most of the papers presented at the Fifteenth International Conference on Computational Methods and Experimental Measurements, this book reviews the latest work on these two approaches, and the interaction between them.

Materials Characterisation IV
Materials Characterisation IV

Author: Andrea Alberto Mammoli

Publisher: WIT Press

Published: 2009

Total Pages: 465

ISBN-13: 1845641892

DOWNLOAD EBOOK

Until recently, engineering materials could be characterised successfully using relatively simple testing procedures. As materials technology advances, interest is growing in materials possessing complex meso-, micro- and nano-structures, which to a large extent determine their physical properties and behaviour. The purposes of materials modelling are many - optimisation, investigation of failure, simulation of production processes, to name a few. Modelling and characterisation are closely intertwined, increasingly so as the complexity of the material increases. Characterisation, in essence, is the connection between the abstract material model and the real-world behaviour of the material in question. Characterisation of complex materials therefore may require a combination of experimental techniques and computation. This book contains papers from the Fourth International Conference on Computational Methods and Experiments in Materials Characterisation which brought researchers who use computational methods, those who perform experiments, and of course those who do both, in all areas of materials characterisation, to discuss their recent results and ideas, in order to foster the multidisciplinary approach that has become necessary for the study of complex phenomena.