Computational Mechanics '86
Computational Mechanics '86

Author: Genki Yagawa

Publisher: Springer Science & Business Media

Published: 2013-11-11

Total Pages: 1360

ISBN-13: 443168042X

DOWNLOAD EBOOK

It is often said that these days there are too many conferences on general areas of computational mechanics. mechanics. and numer ical methods. vJhile this may be true. the his tory of scientific conferences is itself quite short. According to Abraham Pais (in "Subtle is the Lord ...• " Oxford University Press. 1982. p.80). the first international scientific conference ever held was the Karlsruhe Congress of Chemists. 3-5 September 1860 in Karlsruhe. Germany. There were 127 chemists in attendance. and the participants came from Austria. Belgium. France. Germany. Great Britain. Italy. Mexico. Poland. Russia. Spain. Sweden. and Switzerland. At the top of the agenda of the points to be discussed at this conference was the question: "Shall a difference be made between the expressions molecule and atom?" Pais goes on to note: "The conference did not at once succeed in bringing chemists closer together ... It is possible that the older men were offended by the impetuous behavior and imposing manner of the younger scientists" (see references cited in Pais' book). It may be observed that history. in general. repeats itself. However. at ICCM-86 in Tokyo. roughly 500 participants from both the West and the East were in attendance; there were only scholarly exchanges; the young tried to learn from the more experienced. and a spirit of international academic cooperation prevailed.

Computational Mechanics ’88
Computational Mechanics ’88

Author: S.N. Atluri

Publisher: Springer Science & Business Media

Published: 2013-11-11

Total Pages: 1775

ISBN-13: 3642613810

DOWNLOAD EBOOK

The aim of this Conference was to become a forum for discussion of both academic and industrial research in those areas of computational engineering science and mechanics which involve and enrich the rational application of computers, numerical methods, and mechanics, in modern technology. The papers presented at this Conference cover the following topics: Solid and Structural Mechanics, Constitutive Modelling, Inelastic and Finite Deformation Response, Transient Analysis, Structural Control and Optimization, Fracture Mechanics and Structural Integrity, Computational Fluid Dynamics, Compressible and Incompressible Flow, Aerodynamics, Transport Phenomena, Heat Transfer and Solidification, Electromagnetic Field, Related Soil Mechanics and MHD, Modern Variational Methods, Biomechanics, and Off-Shore-Structural Mechanics.

Boundary Element Analysis in Computational Fracture Mechanics
Boundary Element Analysis in Computational Fracture Mechanics

Author: T.A. Cruse

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 171

ISBN-13: 9400913850

DOWNLOAD EBOOK

The Boundary Integral Equation (BIE) method has occupied me to various degrees for the past twenty-two years. The attraction of BIE analysis has been its unique combination of mathematics and practical application. The EIE method is unforgiving in its requirement for mathe matical care and its requirement for diligence in creating effective numerical algorithms. The EIE method has the ability to provide critical inSight into the mathematics that underlie one of the most powerful and useful modeling approximations ever devised--elasticity. The method has even revealed important new insights into the nature of crack tip plastic strain distributions. I believe that EIE modeling of physical problems is one of the remaining opportunities for challenging and fruitful research by those willing to apply sound mathematical discipline coupled with phys ical insight and a desire to relate the two in new ways. The monograph that follows is the summation of many of the successes of that twenty-two years, supported by the ideas and synergisms that come from working with individuals who share a common interest in engineering mathematics and their application. The focus of the monograph is on the application of EIE modeling to one of the most important of the solid mechanics disciplines--fracture mechanics. The monograph is not a trea tise on fracture mechanics, as there are many others who are far more qualified than I to expound on that topic.

Computational Fluid Dynamics for the 21st Century
Computational Fluid Dynamics for the 21st Century

Author: Mohamed Hafez

Publisher: Springer Science & Business Media

Published: 2013-03-09

Total Pages: 412

ISBN-13: 3540449590

DOWNLOAD EBOOK

This volume contains new trends of computational fluid dynamics for the 21st century and consists of papers especially useful to the younger generation of scientists and engineers in this field. Topics include cartesian, gridless and higher-order schemes, and flow-visualization techniques.

Inverse and Crack Identification Problems in Engineering Mechanics
Inverse and Crack Identification Problems in Engineering Mechanics

Author: Georgios E. Stavroulakis

Publisher: Springer Science & Business Media

Published: 2013-11-21

Total Pages: 226

ISBN-13: 1461500192

DOWNLOAD EBOOK

Inverse and crack identification problems are of paramount importance for health monitoring and quality control purposes arising in critical applications in civil, aeronautical, nuclear, and general mechanical engineering. Mathematical modeling and the numerical study of these problems require high competence in computational mechanics and applied optimization. This is the first monograph which provides the reader with all the necessary information. Delicate computational mechanics modeling, including nonsmooth unilateral contact effects, is done using boundary element techniques, which have a certain advantage for the construction of parametrized mechanical models. Both elastostatic and harmonic or transient dynamic problems are considered. The inverse problems are formulated as output error minimization problems and they are theoretically studied as a bilevel optimization problem, also known as a mathematical problem with equilibrium constraints. Beyond classical numerical optimization, soft computing tools (neural networks and genetic algorithms) and filter algorithms are used for the numerical solution. The book provides all the required material for the mathematical and numerical modeling of crack identification testing procedures in statics and dynamics and includes several thoroughly discussed applications, for example, the impact-echo nondestructive evaluation technique. Audience: The book will be of interest to structural and mechanical engineers involved in nondestructive testing and quality control projects as well as to research engineers and applied mathematicians who study and solve related inverse problems. People working on applied optimization and soft computing will find interesting problems to apply to their methods and all necessary material to continue research in this field.

Inverse Problems in Engineering Mechanics II
Inverse Problems in Engineering Mechanics II

Author: G.S. Dulikravich

Publisher: Elsevier

Published: 2000-12-11

Total Pages: 607

ISBN-13: 0080535151

DOWNLOAD EBOOK

Inverse Problems are found in many areas of engineering mechanics and there are many successful applications e.g. in non-destructive testing and characterization of material properties by ultrasonic or X-ray techniques, thermography, etc. Generally speaking, inverse problems are concerned with the determination of the input and the characteristics of a system, given certain aspects of its output. Mathematically, such problems are ill-posed and have to be overcome through development of new computational schemes, regularization techniques, objective functionals, and experimental procedures. Following the IUTAM Symposium on these topics, held in May 1992 in Tokyo, another in November 1994 in Paris, and also the more recent ISIP'98 in March 1998 in Nagano, it was concluded that it would be fruitful to gather regularly with researchers and engineers for an exchange of the newest research ideas. The most recent Symposium of this series "International Symposium on Inverse Problems in Engineering Mechanics (ISIP2000)" was held in March of 2000 in Nagano, Japan, where recent developments in inverse problems in engineering mechanics and related topics were discussed.The following general areas in inverse problems in engineering mechanics were the subjects of ISIP2000: mathematical and computational aspects of inverse problems, parameter or system identification, shape determination, sensitivity analysis, optimization, material property characterization, ultrasonic non-destructive testing, elastodynamic inverse problems, thermal inverse problems, and other engineering applications. The papers in these proceedings provide a state-of-the-art review of the research on inverse problems in engineering mechanics and it is hoped that some breakthrough in the research can be made and that technology transfer will be stimulated and accelerated due to their publication.

Inverse Problems in Engineering Mechanics
Inverse Problems in Engineering Mechanics

Author: Masataka Tanaka

Publisher: Springer Science & Business Media

Published: 2013-03-08

Total Pages: 563

ISBN-13: 3642524397

DOWNLOAD EBOOK

Inverse problems occur in a wide variey of fields. In general, the inverse problem can be defined as one where one should estimate the cause from the result, while the direct problem is concerned with how to obtain the result from the cause. The aim of this symposium was to gather scientists and researchers in engineering mechanics concerned with inverse problems in order to exchange research result and develop computational and experimentalapproaches to solve inverse problems. The contributions in this volume cover the following subjects: mathematical and computational aspects of inverse problems, parameter or system identification, shape determination, sensitivity analysis, optimization, material property characterization, ultrasonic nondestructive testing, elastodynamic inverse problems, thermal inverse problems, and other miscellaneous engineering applications.

CAD/CAM Robotics and Factories of the Future ’90
CAD/CAM Robotics and Factories of the Future ’90

Author: Suren N. Dwivedi

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 651

ISBN-13: 3642582141

DOWNLOAD EBOOK

Flexibility is as acceptable an objective for today's industrial community as is automation. Thus, the title of this conference proceedings volume - Flexible Automation - reflects an added emphasis to the usual industrial automation. As with general automation that has impacted every component of the manufacturing office and plant, the identity of flexible automation can possess various forms and functions. The papers in this volume have been grouped into two main categories. One category deals with implementation of so-called "intelligent manufacturing". This means use of algorithmic methods and artificial intelligence approaches to various problems encountered in practical factory automation tasks. The placement of papers into five chapters of this part cannot be very precise, due to multidisciplinary nature and constant rapid change of the field. The categories are arranged starting from problems of enhancement of current factory settings, and followed by the papers addressing more specific issues of production planning, process technology and product engineering. The fifth chapter contains papers on the very important aspects of factory automation - problems of design, simulation, operation and monitoring of manufacturing cells.

Foundations of Solid Mechanics
Foundations of Solid Mechanics

Author: P. Karasudhi

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 458

ISBN-13: 9401138141

DOWNLOAD EBOOK

This book has been written with two purposes, as a textbook for engineering courses and as a reference book for engineers and scientists. The book is an outcome of several lecture courses. These include lectures given to graduate students at the Asian Institute of Technology for several years, a course on elasticity for University of Tokyo graduate students in the spring of 1979, and courses on elasticity, viscoelasticity and ftnite deformation at the National University of Singapore from May to November 1985. In preparing this book, I kept three objectives in mind: ftrst, to provide sound fundamental knowledge of solid mechanics in the simplest language possible; second, to introduce effective analytical and numerical solution methods; and third, to impress on readers that the subject is beautiful, and is accessible to those with only a standard mathematical background. In order to meet those objectives, the ftrst chapter of the book is a review of mathematical foundations intended for anyone whose background is an elementary knowledge of differential calculus, scalars and vectors, and Newton's laws of motion. Cartesian tensors are introduced carefully. From then on, only Cartesian tensors in the indicial notation, with subscript as indices, are used to derive and represent all theories.

Discretization Methods in Structural Mechanics
Discretization Methods in Structural Mechanics

Author: Günther Kuhn

Publisher: Springer Science & Business Media

Published: 2013-03-08

Total Pages: 455

ISBN-13: 3642493734

DOWNLOAD EBOOK

The advent of the digital computer has given great impetus to the development of modern discretization methods in structural mechanics. The young history of the finite element method (FEM) reflects the dramatic increase of computing speed and storage capacity within a relatively short period of time. The history of the boundary element method (BEM) is still younger. Presently, intense scientific efforts aimed at extending the range of application of the BEM can be observed. More than 10 years ago, O.C. Zienkiewicz and his co-workers published the first papers on the coupling of FE and BE discretizations of subregions of solids for the purpose of exploiting the complementary advantages of the two discretization methods and reducing their disadvantages. The FEM has revolutionized structural analysis in industry as well as academia. The BEM has a fair share in the continuation of this revolution. Both discretization methods have become a domain of vigorous, world-wide research activities. The rapid increase of the number of specialized journals and scientific meetings indicates the remarkable increase of research efforts in this important subdolll.ain of computational ulechanics. Several discussions of this situation in the Committee for Discretization Methods ill Solid Mechanics of the Society for Applied Mathematics and Mechanics (GAMM) resulted in the plan to submit a proposal to the General Assembly of the International Union of Theoretical and Applied Mechanics (IUTAM) to sponsor a pertinent IUTAM Symposium.