Fracture and Fatigue of Welded Joints and Structures
Fracture and Fatigue of Welded Joints and Structures

Author: K Macdonald

Publisher: Elsevier

Published: 2011-04-19

Total Pages: 353

ISBN-13: 0857092502

DOWNLOAD EBOOK

The failure of any welded joint is at best inconvenient and at worst can lead to catastrophic accidents. Fracture and fatigue of welded joints and structures analyses the processes and causes of fracture and fatigue, focusing on how the failure of welded joints and structures can be predicted and minimised in the design process.Part one concentrates on analysing fracture of welded joints and structures, with chapters on constraint-based fracture mechanics for predicting joint failure, fracture assessment methods and the use of fracture mechanics in the fatigue analysis of welded joints. In part two, the emphasis shifts to fatigue, and chapters focus on a variety of aspects of fatigue analysis including assessment of local stresses in welded joints, fatigue design rules for welded structures, k-nodes for offshore structures and modelling residual stresses in predicting the service life of structures.With its distinguished editor and international team of contributors, Fracture and fatigue of welded joints and structures is an essential reference for mechanical, structural and welding engineers, as well as those in the academic sector with a research interest in the field. - Analyses the processes and causes of fracture and fatigue, focusing predicting and minimising the failure of welded joints in the design process - Assesses the fracture of welded joints and structure featuring constraint-based fracture mechanics for predicting joint failure - Explores specific considerations in fatigue analysis including the assessment of local stresses in welded joints and fatigue design rules for welded structures

Mechanical characterization and endurance of welded joints
Mechanical characterization and endurance of welded joints

Author: Brahim Tlili, Hichem Guizani et Mohamed Ben Nasser

Publisher: Les Éditions du Net

Published: 2021-05-28

Total Pages: 15

ISBN-13: 2312081202

DOWNLOAD EBOOK

In this study, we will be interested in characterizing for two grades of metallic materials, the base metal on the one hand and the material of the welded joint, which is a priori, the critical part of the part that may present a risk of premature failure by compared to the base metal. Consequently, the emphasis is placed in this document on the study of the monotonic and cyclic behavior of austenitic molybdenum stainless steel AISI 316L and their joints welded by the MIG process after a finishing treatment (brushing and heat treatment). The cyclic behavior is characterized mainly by cyclic hardening, low cycle fatigue and cracking tests. The study of the damage mechanisms of each metal as well as the origin of the rupture is a complement to the understanding of the studied behaviors.

Fatigue Life Analyses of Welded Structures
Fatigue Life Analyses of Welded Structures

Author: Tom Lassen

Publisher: John Wiley & Sons

Published: 2013-03-01

Total Pages: 442

ISBN-13: 1118614704

DOWNLOAD EBOOK

Avoiding or controlling fatigue damage is a major issue in the design and inspection of welded structures subjected to dynamic loading. Life predictions are usually used for safe life analysis, i.e. for verifying that it is very unlikely that fatigue damage will occur during the target service life of a structure. Damage tolerance analysis is used for predicting the behavior of a fatigue crack and for planning of in-service scheduled inspections. It should be a high probability that any cracks appearing are detected and repaired before they become critical. In both safe life analysis and the damage tolerance analysis there may be large uncertainties involved that have to be treated in a logical and consistent manner by stochastic modeling. This book focuses on fatigue life predictions and damage tolerance analysis of welded joints and is divided into three parts. The first part outlines the common practice used for safe life and damage tolerance analysis with reference to rules and regulations. The second part emphasises stochastic modeling and decision-making under uncertainty, while the final part is devoted to recent advances within fatigue research on welded joints. Industrial examples that are included are mainly dealing with offshore steel structures. Spreadsheets which accompany the book give the reader the possibility for hands-on experience of fatigue life predictions, crack growth analysis and inspection planning. As such, these different areas will be of use to engineers and researchers.

Fatigue Analysis of Welded Components
Fatigue Analysis of Welded Components

Author: E. Niemi

Publisher: Woodhead Publishing

Published: 2006-09-27

Total Pages: 56

ISBN-13: 1845696662

DOWNLOAD EBOOK

This report provides background and guidance on the use of the structural hot spot stress approach to the fatigue design of welded components and structures. It complements the IIW recommendations for 'Fatigue Design of Welded Joints and Components' and extends the information provided in the IIW recommendations on 'Stress Determination for Fatigue Analysis of Welded Components'. This approach is applicable to cases of potential fatigue cracking from the weld toe. It has been in use for many years in the context of tubular joints. The present report concentrates on its extension to structures fabricated from plates and non-tubular sections.Following an explanation of the structural hot spot stress, its definition and its relevance to fatigue, the authors describe methods for its determination. Stress determination from both finite element analysis and strain gauge measurements is considered. Parametric formulae for calculating stress increases due to misalignment and structural discontinuities are also presented. Special attention is paid to the use of finite element stress analysis and guidance is given on the choice of element type and size for use with either solid or shell elements. Design S-N curves for use with the structural hot spot stress are presented for a range of weld details. Finally, practical application of the recommendations is illustrated in two case studies involving the fatigue assessment of welded structures using the structural hot spot stress approach. - Provides practical guidance on the application of the structural hot-spot stress approach - Discusses stress determination from both finite element analysis and strain gauge measurements - Practical application of the recommendations is illustrated in two case studies

Recommendations for Fatigue Design of Welded Joints and Components
Recommendations for Fatigue Design of Welded Joints and Components

Author: A. F. Hobbacher

Publisher: Springer

Published: 2015-12-23

Total Pages: 153

ISBN-13: 3319237578

DOWNLOAD EBOOK

This book provides a basis for the design and analysis of welded components that are subjected to fluctuating forces, to avoid failure by fatigue. It is also a valuable resource for those on boards or commissions who are establishing fatigue design codes. For maximum benefit, readers should already have a working knowledge of the basics of fatigue and fracture mechanics. The purpose of designing a structure taking into consideration the limit state for fatigue damage is to ensure that the performance is satisfactory during the design life and that the survival probability is acceptable. The latter is achieved by the use of appropriate partial safety factors. This document has been prepared as the result of an initiative by Commissions XIII and XV of the International Institute of Welding (IIW).

AWS A5. 1/A5. 1M-2012, Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding
AWS A5. 1/A5. 1M-2012, Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding

Author: American Welding Society. Committee on Filler Metals and Allied Materials

Publisher:

Published: 2012-11-02

Total Pages: 50

ISBN-13: 9780871718105

DOWNLOAD EBOOK

This specification establishes the requirements for classification of carbon steel electrodes for shielded metal arc welding. The requirements include mechanical properties of weld metal, weld metal soundness, and usability of electrode. Requirements for composition of the weld metal, moisture content of low-hydrogen electrode coverings, standard sizes and lengths, marking, manufacturing, and packaging are all included. A guide to the use of the standard is included in an annex. Optional supplemental requirements include improved toughness and ductility, lower moisture contents, and diffusible hydrogen limits. This specification makes use of both U.S. Customary Units and the International System of Units (SI). Since these are not equivalent, each system must be used independently of the other.

Structural Hot-Spot Stress Approach to Fatigue Analysis of Welded Components
Structural Hot-Spot Stress Approach to Fatigue Analysis of Welded Components

Author: Erkki Niemi

Publisher: Springer

Published: 2017-08-28

Total Pages: 85

ISBN-13: 9811055688

DOWNLOAD EBOOK

This book provides background and guidance on the use of the structural hot-spot stress approach to fatigue analysis. The book also offers Design S-N curves for use with the structural hot-spot stress for a range of weld details, and presents parametric formulas for calculating stress increases due to misalignment and structural discontinuities. Highlighting the extension to structures fabricated from plates and non-tubular sections. The structural hot-spot stress approach focuses on cases of potential fatigue cracking from the weld toe and it has been in use for many years in tubular joints. Following an explanation of the structural hot-spot stress, its definition and its relevance to fatigue, the book describes methods for its determination. It considers stress determination from both finite element analysis and strain gauge measurements, and emphasizes the use of finite element stress analysis, providing guidance on the choice of element type and size for use with either solid or shell elements. Lastly, it illustrates the use of the recommendations in four case studies involving the fatigue assessment of welded structures using the structural hot-spot stress

Welding Metallurgy and Weldability of Nickel-Base Alloys
Welding Metallurgy and Weldability of Nickel-Base Alloys

Author: John C. Lippold

Publisher: John Wiley & Sons

Published: 2011-09-20

Total Pages: 370

ISBN-13: 1118210034

DOWNLOAD EBOOK

The most up-to-date coverage of welding metallurgy aspects and weldability issues associated with Ni-base alloys Welding Metallurgy and Weldability of Nickel-Base Alloys describes the fundamental metallurgical principles that control the microstructure and properties of welded Ni-base alloys. It serves as a practical how-to guide that enables engineers to select the proper alloys, filler metals, heat treatments, and welding conditions to ensure that failures are avoided during fabrication and service. Chapter coverage includes: Alloying additions, phase diagrams, and phase stability Solid-solution strengthened Ni-base alloys Precipitation strengthened Ni-base alloys Oxide dispersion strengthened alloys and nickel aluminides Repair welding of Ni-base alloys Dissimilar welding Weldability testing High-chromium alloys used in nuclear power applications With its excellent balance between the fundamentals and practical problem solving, the book serves as an ideal reference for scientists, engineers, and technicians, as well as a textbook for undergraduate and graduate courses in welding metallurgy.

HSLA Steels 2015, Microalloying 2015 & Offshore Engineering Steels 2015
HSLA Steels 2015, Microalloying 2015 & Offshore Engineering Steels 2015

Author: The Chinese Society for Metals

Publisher: Springer

Published: 2017-03-22

Total Pages: 1147

ISBN-13: 3319487671

DOWNLOAD EBOOK

This is a collection of papers presented at the joint conference of the 7th International Conference on High Strength Low Alloy Steels (HSLA Steels 2015), the International Conference on Microalloying 2015 (Microalloying 2015), and the International Conference on Offshore Engineering Steels 2015 (OES 2015). The papers focus on the exchange of the latest scientific and technological progresses on HSLA steels, microalloying steels, and offshore engineering steels over the past decades. The contributions are intended to strengthen cooperation between universities and research institutes, and iron and steel companies and users, and promote the further development in the fields all over the world.