AC Power Systems Handbook

AC Power Systems Handbook

Author: Jerry C. Whitaker

Publisher: CRC Press

Published: 2019-07-17

Total Pages: 612

ISBN-13: 9781420049664

DOWNLOAD EBOOK

Proper operation of sensitive equipment requires attention to transient disturbances, grounding practices, and standby power needs. This second edition of the successful AC Power Systems Handbook focuses on engineering technology essential to the design, maintenance, and operation of alternating current power supplies. What's New in the Second Edition? Expanded discussion on power-system components New chapter on grounding practices Appendix covering engineering data and tables Updated material in all chapters Serving engineering personnel involved in the specification, installation, and maintenance of electronic equipment for industry, this revision comprehensively examines the design and maintenance of ac power systems for critical-use applications. AC Power Systems Handbook also reflects the increased movement toward microelectronic equipment and microprocessor-based systems as well as the increased priority among electronics engineers on the protection of such systems.


Transients in Electrical Systems: Analysis, Recognition, and Mitigation

Transients in Electrical Systems: Analysis, Recognition, and Mitigation

Author: J. C. Das

Publisher: McGraw Hill Professional

Published: 2010-05-06

Total Pages: 737

ISBN-13: 0071626034

DOWNLOAD EBOOK

Detect and Mitigate Transients in Electrical Systems This practical guide explains how to identify the origin of disturbances in electrical systems and analyze them for effective mitigation and control. Transients in Electrical Systems considers all transient frequencies, ranging from 0.1 Hz to 50 MHz, and discusses transmission line and cable modeling as well as frequency dependent behavior. Results of EMTP simulations, solved examples, and detailed equations are included in this comprehensive resource. Transients in Electrical Systems covers: Transients in lumped circuits Control systems Lightning strokes, shielding, and backflashovers Transients of shunt capacitor banks Switching transients and temporary overvoltages Current interruption in AC circuits Symmetrical and unsymmetrical short-circuit currents Transient behavior of synchronous generators, induction and synchronous motors, and transformers Power electronic equipment Flicker, bus, transfer, and torsional vibrations Insulation coordination Gas insulated substations Transients in low-voltage and grounding systems Surge arresters DC systems, short-circuits, distributions, and HVDC Smart grids and wind power generation


IEEE 100

IEEE 100

Author: Institute of Electrical and Electronics Engineers

Publisher: I E E E

Published: 2000

Total Pages: 1352

ISBN-13: 9780738126012

DOWNLOAD EBOOK


NUREG/CR.

NUREG/CR.

Author: U.S. Nuclear Regulatory Commission

Publisher:

Published: 1977

Total Pages: 16

ISBN-13:

DOWNLOAD EBOOK


NRC Regulatory Guides

NRC Regulatory Guides

Author: U.S. Nuclear Regulatory Commission

Publisher:

Published: 1973

Total Pages: 32

ISBN-13:

DOWNLOAD EBOOK

A compilation of currently available electronic versions of NRC regulatory guides.


IEEE Recommended Practice for Electric Power Distribution for Industrial Plants

IEEE Recommended Practice for Electric Power Distribution for Industrial Plants

Author: Institute of Electrical and Electronics Engineers

Publisher: Institute of Electrical & Electronics Engineers(IEEE)

Published: 1994

Total Pages: 776

ISBN-13:

DOWNLOAD EBOOK

A thorough analysis of basic electrical-systems considerations is presented. Guidance is provided in design, construction, and continuity of an overall system to achieve safety of life and preservation of property; reliability; simplicity of operation; voltage regulation in the utilization of equipment within the tolerance limits under all load conditions; care and maintenance; and flexibility to permit development and expansion. Recommendations are made regarding system planning; voltage considerations; surge voltage protection; system protective devices; fault calculations; grounding; power switching, transformation, and motor-control apparatus; instruments and meters; cable systems; busways; electrical energy conservation; and cost estimation.


IEEE Standard Dictionary of Electrical and Electronics Terms

IEEE Standard Dictionary of Electrical and Electronics Terms

Author: Institute of Electrical and Electronics Engineers

Publisher: Institute of Electrical & Electronics Engineers(IEEE)

Published: 1977

Total Pages: 902

ISBN-13:

DOWNLOAD EBOOK

Dictionary of terms used in electronics and electrical engineering - includes a list of abbreviations. Diagrams, graphs and references.