fib Model Code for Concrete Structures 2010
fib Model Code for Concrete Structures 2010

Author: fib - federation internationale du beton

Publisher: John Wiley & Sons

Published: 2013-12-04

Total Pages: 434

ISBN-13: 3433030618

DOWNLOAD EBOOK

The International Federation for Structural Concrete (fib) is a pre-normative organization. 'Pre-normative' implies pioneering work in codification. This work has now been realized with the fib Model Code 2010. The objectives of the fib Model Code 2010 are to serve as a basis for future codes for concrete structures, and present new developments with regard to concrete structures, structural materials and new ideas in order to achieve optimum behaviour. The fib Model Code 2010 is now the most comprehensive code on concrete structures, including their complete life cycle: conceptual design, dimensioning, construction, conservation and dismantlement. It is expected to become an important document for both national and international code committees, practitioners and researchers. The fib Model Code 2010 was produced during the last ten years through an exceptional effort by Joost Walraven (Convener; Delft University of Technology, The Netherlands), Agnieszka Bigaj-van Vliet (Technical Secretary; TNO Built Environment and Geosciences, The Netherlands) as well as experts out of 44 countries from five continents.

Interfacial Transition Zone in Concrete
Interfacial Transition Zone in Concrete

Author: J.C. Maso

Publisher: CRC Press

Published: 2004-03-01

Total Pages: 218

ISBN-13: 0203627253

DOWNLOAD EBOOK

An important new state-of-the-art report prepared by RILEM Technical Committee 108 ICC. It has been written by a team of leading international experts from the UK, USA, Canada, Israel, Germany, Denmark, South Africa, Italy and France. Research studies over recent years in the field of cement science have focused on the behaviour of the interfaces between the components of cement-based materials. The techniques used in other areas of materials science are being applied to the complex materials found in cements and concretes, and this book provides a significant survey of the present state of the art.

Corrosion of Steel in Concrete Structures
Corrosion of Steel in Concrete Structures

Author: Amir Poursaee

Publisher: Woodhead Publishing

Published: 2023-02-20

Total Pages: 400

ISBN-13: 0323851320

DOWNLOAD EBOOK

Essential reading for researchers, practitioners, and engineers, this book covers not only all the important aspects in the field of corrosion of steel reinforced concrete but also discusses new topics and future trends. Theoretical concepts of corrosion of steel in concrete structures, the variety of reinforcing materials and concrete, including stainless steel and galvanized steel, measurements and evaluations, such as electrochemical techniques and acoustic emission, protection and maintenance methods, and modelling, latest developments, and future trends in the field are discussed. - Comprehensive coverage of the corrosion of steel bars in concrete, investigating the range of reinforcing materials, and types of concrete - Introduces the latest measuring methods, data collection, and advanced modeling techniques - Second edition covers a range of new, emerging topics such as the concept of chloride threshold value, concrete permeability and chloride diffusion, the role of steel microstructure, and innovations in corrosion detection devices

Ultra-High Performance Concrete and High Performance Construction Materials
Ultra-High Performance Concrete and High Performance Construction Materials

Author: Bernhard Middendorf

Publisher: BoD – Books on Demand

Published: 2020-01-01

Total Pages: 206

ISBN-13: 3737608288

DOWNLOAD EBOOK

With HiPerMat 5 on March 11-13, 2020 the 5th International Symposium on Ultra-High Performance Concrete and High Performance Construction Materials documents the actual state of development of application in the fields of: Material Science and Development, Composite Concrete Materials, Strength and Deformation behaviour of UHPC, Durability and Sustainability of UHPC, Design and Construction with UHPC, Structural Modelling and Optimisation, Lightweight Concrete Structures, High-Precision Manufacturing for Pre-Fabrication, Nanotechnology for Construction Materials, Innovative Applications, Smart Construction Materials, This volume contains the short versions (two pages) of all contributions that have been accepted for publication at HiPerMat 5.

Reinforced Concrete
Reinforced Concrete

Author: James Grierson MacGregor

Publisher: Prentice Hall

Published: 1997

Total Pages: 939

ISBN-13: 9780136139850

DOWNLOAD EBOOK

Based on the 1995 edition of the American Concrete Institute Building Code, this text explains the theory and practice of reinforced concrete design in a systematic and clear fashion, with an abundance of step-by-step worked examples, illustrations, and photographs. The focus is on preparing students to make the many judgment decisions required in reinforced concrete design, and reflects the author's experience as both a teacher of reinforced concrete design and as a member of various code committees. This edition provides new, revised and expanded coverage of the following topics: core testing and durability; shrinkage and creep; bases the maximum steel ratio and the value of the factor on Appendix B of ACI318-95; composite concrete beams; strut-and-tie models; dapped ends and T-beam flanges. It also expands the discussion of STMs and adds new examples in SI units.

3D Concrete Printing Technology
3D Concrete Printing Technology

Author: Jay G. Sanjayan

Publisher: Butterworth-Heinemann

Published: 2019-02-15

Total Pages: 451

ISBN-13: 0128154829

DOWNLOAD EBOOK

3D Concrete Printing Technology provides valuable insights into the new manufacturing techniques and technologies needed to produce concrete materials. In this book, the editors explain the concrete printing process for mix design and the fresh properties for the high-performance printing of concrete, along with commentary regarding their extrudability, workability and buildability. This is followed by a discussion of three large-scale 3D printings of ultra-high performance concretes, including their processing setup, computational design, printing process and materials characterization. Properties of 3D-printed fiber-reinforced Portland cement paste and its flexural and compressive strength, density and porosity and the 3D-printing of hierarchical materials is also covered. - Explores the factors influencing the mechanical properties of 3D printed products out of magnesium potassium phosphate cement material - Includes methods for developing Concrete Polymer Building Components for 3D Printing - Provides methods for formulating geopolymers for 3D printing for construction applications

Strain-Hardening Cement-Based Composites
Strain-Hardening Cement-Based Composites

Author: Viktor Mechtcherine

Publisher: Springer

Published: 2017-09-04

Total Pages: 811

ISBN-13: 9402411941

DOWNLOAD EBOOK

This is the proceedings of the 4th International Conference on Strain-Hardening Cement-Based Composites (SHCC4), that was held at the Technische Universität Dresden, Germany from 18 to 20 September 2017. The conference focused on advanced fiber-reinforced concrete materials such as strain-hardening cement-based composites (SHCC), textile-reinforced concrete (TRC) and high-performance fiber-reinforced cement-based composites (HPFRCC). All these new materials exhibit pseudo-ductile behavior resulting from the formation of multiple, fine cracks when subject to tensile loading. The use of such types of fiber-reinforced concrete could revolutionize the planning, development, dimensioning, structural and architectural design, construction of new and strengthening and repair of existing buildings and structures in many areas of application. The SHCC4 Conference was the follow-up of three previous successful international events in Stellenbosch, South Africa in 2009, Rio de Janeiro, Brazil in 2011, and Dordrecht, The Netherlands in 2014.

High-performance Construction Materials
High-performance Construction Materials

Author: Caijun Shi

Publisher: World Scientific

Published: 2008

Total Pages: 448

ISBN-13: 981279736X

DOWNLOAD EBOOK

This book describes a number of high-performance construction materials, including concrete, steel, fiber-reinforced cement, fiber-reinforced plastics, polymeric materials, geosynthetics, masonry materials and coatings. It discusses the scientific bases for the manufacture and use of these high-performance materials. Testing and application examples are also included, in particular the application of relatively new high-performance construction materials to design practice.Most books dealing with construction materials typically address traditional materials only rather than high-performance materials and, as a consequence, do not satisfy the increasing demands of today''s society. On the other hand, books dealing with materials science are not engineering-oriented, with limited coverage of the application to engineering practice. This book is thus unique in reflecting the great advances made on high-performance construction materials in recent years.This book is appropriate for use as a textbook for courses in engineering materials, structural materials and civil engineering materials at the senior undergraduate and graduate levels. It is also suitable for use by practice engineers, including construction, materials, mechanical and civil engineers.