History, Development and Future of TRIGA Research Reactors
Author:
Publisher:
Published: 2016
Total Pages: 131
ISBN-13: 9789201281197
DOWNLOAD EBOOKPosts
Molybdenum-99 for Medical Imaging
Author: National Academies of Sciences, Engineering, and Medicine
Publisher: National Academies Press
Published: 2016-11-28
Total Pages: 264
ISBN-13: 0309445310
DOWNLOAD EBOOKThe decay product of the medical isotope molybdenum-99 (Mo-99), technetium-99m (Tc-99m), and associated medical isotopes iodine-131 (I-131) and xenon-133 (Xe-133) are used worldwide for medical diagnostic imaging or therapy. The United States consumes about half of the world's supply of Mo-99, but there has been no domestic (i.e., U.S.-based) production of this isotope since the late 1980s. The United States imports Mo-99 for domestic use from Australia, Canada, Europe, and South Africa. Mo-99 and Tc-99m cannot be stockpiled for use because of their short half-lives. Consequently, they must be routinely produced and delivered to medical imaging centers. Almost all Mo-99 for medical use is produced by irradiating highly enriched uranium (HEU) targets in research reactors, several of which are over 50 years old and are approaching the end of their operating lives. Unanticipated and extended shutdowns of some of these old reactors have resulted in severe Mo-99 supply shortages in the United States and other countries. Some of these shortages have disrupted the delivery of medical care. Molybdenum-99 for Medical Imaging examines the production and utilization of Mo-99 and associated medical isotopes, and provides recommendations for medical use.
Extractive Metallurgy of Niobium
Author: A.K. Suri
Publisher: Routledge
Published: 2017-11-13
Total Pages: 272
ISBN-13: 1351448978
DOWNLOAD EBOOKThe growth and development witnessed today in modern science, engineering, and technology owes a heavy debt to the rare, refractory, and reactive metals group, of which niobium is a member. Extractive Metallurgy of Niobium presents a vivid account of the metal through its comprehensive discussions of properties and applications, resources and resource processing, chemical processing and compound preparation, metal extraction, and refining and consolidation. Typical flow sheets adopted in some leading niobium-producing countries for the beneficiation of various niobium sources are presented, and various chemical processes for producing pure forms of niobium intermediates such as chloride, fluoride, and oxide are discussed. The book also explains how to liberate the metal from its intermediates and describes the physico-chemical principles involved. It is an excellent reference for chemical metallurgists, hydrometallurgists, extraction and process metallurgists, and minerals processors. It is also valuable to a wide variety of scientists, engineers, technologists, and students interested in the topic.
Sustainable Development of Algal Biofuels in the United States
Author: National Research Council
Publisher: National Academies Press
Published: 2013-01-18
Total Pages: 247
ISBN-13: 0309260329
DOWNLOAD EBOOKBiofuels made from algae are gaining attention as a domestic source of renewable fuel. However, with current technologies, scaling up production of algal biofuels to meet even 5 percent of U.S. transportation fuel needs could create unsustainable demands for energy, water, and nutrient resources. Continued research and development could yield innovations to address these challenges, but determining if algal biofuel is a viable fuel alternative will involve comparing the environmental, economic and social impacts of algal biofuel production and use to those associated with petroleum-based fuels and other fuel sources. Sustainable Development of Algal Biofuels was produced at the request of the U.S. Department of Energy.
NUREG/CR.
Author: U.S. Nuclear Regulatory Commission
Publisher:
Published: 1977
Total Pages: 16
ISBN-13:
DOWNLOAD EBOOKProcessing of Heavy Crude Oils
Author: Ramasamy Marappa Gounder
Publisher: Intechopen
Published: 2019
Total Pages: 274
ISBN-13: 1839684097
DOWNLOAD EBOOKUnconventional heavy crude oils are replacing the conventional light crude oils slowly but steadily as a major energy source. Heavy crude oils are cheaper and present an opportunity to the refiners to process them with higher profit margins. However, the unfavourable characteristics of heavy crude oils such as high viscosity, low API gravity, low H/C ratio, chemical complexity with high asphaltenes content, high acidity, high sulfur and increased level of metal and heteroatom impurities impede extraction, pumping, transportation and processing. Very poor mobility of the heavy oils, due to very high viscosities, significantly affects production and transportation. Techniques for viscosity reduction, drag reduction and in-situ upgrading of the crude oil to improve the flow characteristics in pipelines are presented in this book. The heavier and complex molecules of asphaltenes with low H/C ratios present many technological challenges during the refining of the crude oil, such as heavy coking on catalysts. Hydrogen addition and carbon removal are the two approaches used to improve the recovery of value-added products such as gasoline and diesel. In addition, the heavy crude oil needs pre-treatment to remove the high levels of impurities before the crude oil can be refined. This book introduces the major challenges and some of the methods to overcome them.
Decommissioning Techniques for Research Reactors
Author: International Atomic Energy Agency
Publisher:
Published: 1994
Total Pages: 124
ISBN-13:
DOWNLOAD EBOOKThis is the first report published by the IAEA which provides guidance on the preparation and implementation of the decommissioning of different types of research reactor. Different construction and operational features of research reactors have a major impact on the decommissioning techniques required. This report offers information on the conclusions drawn from a number of completed projects and identifies their similarities and differences. It is complemented by a computerized research reactor databank. Staff requirements, decommissioning costs waste activity are presented graphically according to reactor thermal power and integrated energy.
Industrial Ventilation
Author: Acgih
Publisher:
Published: 2016
Total Pages:
ISBN-13: 9781607260875
DOWNLOAD EBOOKUse of Low Enriched Uranium Fuel in Accelerator Driven Subcritical Systems
Author: International Atomic Energy Agency
Publisher:
Published: 2017
Total Pages: 0
ISBN-13: 9789201062178
DOWNLOAD EBOOKThis publication presents the results and conclusions of an international research collaboration devoted to gaining a better understanding of the physics of Accelerator Driven Subcritical Systems (ADS), with particular emphasis on using low enriched uranium (LEU) fuel. The publication contains information on nine ADS facilities, including descriptions of the hardware deployed, experiments conducted, computational resources and procedures used in the analyses, principal results obtained, and conclusions drawn from the knowledge gained as a consequence of this work. It is intended to provide information for users of ADS systems and those involved in the design of new ADS facilities to use LEU fuel and in the conversion of some existing facilities from using highly enriched Uranium (HEU) to LEU.
Characterization and Testing of Materials for Nuclear Reactors
Author: International Atomic Energy Agency
Publisher:
Published: 2007
Total Pages: 158
ISBN-13:
DOWNLOAD EBOOKIndustrial growth, energy consumption are seen as measures towards economic developments. With increase in industrial development worldwide, the demand of energy is continually on the rise. Today, the energy industry is facing many challenges. Nuclear fission and nuclear fusion are seen as important future energy sources. Development of innovative reactor designs with large efficiency for fuel burn up is one of the needs of fission reactors. The materials resistant to high dose of radiations in fusion reactors is another major challenge. The production of electricity without global warming is an important pressing demand on the energy sector. The demands on quality control of components for nuclear and heavy industry are very stringent. Development of well characterized, high quality materials is therefore essential for safe, efficient and reliable operation of engineering components. The diagnosis of failure of machinery parts comes from the post operational characterization of materials. Various destructive and non-destructive techniques are used for this purpose. Research reactors have played an important role in non-destructive characterization of materials and have contributed to technology development. This publication focuses on characterization of materials for industries in general and nuclear energy sector in particular. The main focus is on research reactor based techniques with some discussion on other allied methods like positron annihilation.--Publisher's description.
