An Introduction to SOLIDWORKS Flow Simulation 2019
An Introduction to SOLIDWORKS Flow Simulation 2019

Author: John Matsson

Publisher: SDC Publications

Published: 2019

Total Pages: 331

ISBN-13: 163057239X

DOWNLOAD EBOOK

An Introduction to SOLIDWORKS Flow Simulation 2019 takes you through the steps of creating the SOLIDWORKS part for the simulation followed by the setup and calculation of the SOLIDWORKS Flow Simulation project. The results from calculations are visualized and compared with theoretical solutions and empirical data. Each chapter starts with the objectives and a description of the specific problems that are studied. End of chapter exercises are included for reinforcement and practice of what has been learned. The fourteen chapters of this book are directed towards first-time to intermediate level users of SOLIDWORKS Flow Simulation. It is intended to be a supplement to undergraduate Fluid Mechanics and Heat Transfer related courses. This book can also be used to show students the capabilities of fluid flow and heat transfer simulations in freshman and sophomore courses such as Introduction to Engineering. Both internal and external flow problems are covered and compared with experimental results and analytical solutions. Covered topics include airfoil flow, boundary layers, flow meters, heat exchanger, natural and forced convection, pipe flow, rotating flow, tube bank flow and valve flow.

An Introduction to SOLIDWORKS Flow Simulation 2016
An Introduction to SOLIDWORKS Flow Simulation 2016

Author: John Matsson

Publisher: SDC Publications

Published: 2016-07

Total Pages: 342

ISBN-13: 1630570109

DOWNLOAD EBOOK

An Introduction to SOLIDWORKS Flow Simulation 2016 takes you through the steps of creating the SOLIDWORKS part for the simulation followed by the setup and calculation of the SOLIDWORKS Flow Simulation project. The results from calculations are visualized and compared with theoretical solutions and empirical data. Each chapter starts with the objectives and a description of the specific problems that are studied. End of chapter exercises are included for reinforcement and practice of what has been learned. The fourteen chapters of this book are directed towards first-time to intermediate level users of SOLIDWORKS Flow Simulation. It is intended to be a supplement to undergraduate Fluid Mechanics and Heat Transfer related courses. This book can also be used to show students the capabilities of fluid flow and heat transfer simulations in freshman and sophomore courses such as Introduction to Engineering. Both internal and external flow problems are covered and compared with experimental results and analytical solutions. Covered topics include airfoil flow, boundary layers, flow meters, heat exchanger, natural and forced convection, pipe flow, rotating flow, tube bank flow and valve flow.

An Introduction to SolidWorks Flow Simulation 2012
An Introduction to SolidWorks Flow Simulation 2012

Author: John E. Matsson

Publisher: SDC Publications

Published: 2012

Total Pages: 320

ISBN-13: 1585037117

DOWNLOAD EBOOK

An Introduction to SolidWorks Flow Simulation 2012 takes you through the steps of creating the SolidWorks part for the simulation followed by the setup and calculation of the SolidWorks Flow Simulation project. The results from calculations are visualized and compared with theoretical solutions and empirical data. Each chapter starts with the objectives and a description of the specific problems that are studied. End of chapter exercises are included for reinforcement and practice of what has been learned. The thirteen chapters of this book are directed towards first-time to intermediate level users of SolidWorks Flow Simulation. It is intended to be a supplement to undergraduate Fluid Mechanics and Heat Transfer related courses. This book can also be used to show students the capabilities of fluid flow and heat transfer simulations in freshman and sophomore courses such as Introduction to Engineering. Both internal and external flow problems are covered and compared with experimental results and analytical solutions. Covered topics include airfoil flow, boundary layers, flow meters, heat exchanger, natural and forced convection, pipe flow, rotating flow, tube bank flow and valve flow.

An Introduction to SOLIDWORKS Flow Simulation 2018
An Introduction to SOLIDWORKS Flow Simulation 2018

Author: John Matsson

Publisher: SDC Publications

Published: 2018

Total Pages: 330

ISBN-13: 1630571636

DOWNLOAD EBOOK

An Introduction to SOLIDWORKS Flow Simulation 2018 takes you through the steps of creating the SOLIDWORKS part for the simulation followed by the setup and calculation of the SOLIDWORKS Flow Simulation project. The results from calculations are visualized and compared with theoretical solutions and empirical data. Each chapter starts with the objectives and a description of the specific problems that are studied. End of chapter exercises are included for reinforcement and practice of what has been learned. The fourteen chapters of this book are directed towards first-time to intermediate level users of SOLIDWORKS Flow Simulation. It is intended to be a supplement to undergraduate Fluid Mechanics and Heat Transfer related courses. This book can also be used to show students the capabilities of fluid flow and heat transfer simulations in freshman and sophomore courses such as Introduction to Engineering. Both internal and external flow problems are covered and compared with experimental results and analytical solutions. Covered topics include airfoil flow, boundary layers, flow meters, heat exchanger, natural and forced convection, pipe flow, rotating flow, tube bank flow and valve flow.

An Introduction to SOLIDWORKS Flow Simulation 2021
An Introduction to SOLIDWORKS Flow Simulation 2021

Author: John Matsson

Publisher: SDC Publications

Published: 2021-04

Total Pages: 350

ISBN-13: 163057385X

DOWNLOAD EBOOK

An Introduction to SOLIDWORKS Flow Simulation 2021 takes you through the steps of creating the SOLIDWORKS part for the simulation followed by the setup and calculation of the SOLIDWORKS Flow Simulation project. The results from calculations are visualized and compared with theoretical solutions and empirical data. Each chapter starts with the objectives and a description of the specific problems that are studied. End of chapter exercises are included for reinforcement and practice of what has been learned. The fourteen chapters of this book are directed towards first-time to intermediate level users of SOLIDWORKS Flow Simulation. It is intended to be a supplement to undergraduate Fluid Mechanics and Heat Transfer related courses. This book can also be used to show students the capabilities of fluid flow and heat transfer simulations in freshman and sophomore courses such as Introduction to Engineering. Both internal and external flow problems are covered and compared with experimental results and analytical solutions. Covered topics include airfoil flow, boundary layers, flow meters, heat exchanger, natural and forced convection, pipe flow, rotating flow, tube bank flow and valve flow. Covers these feature of SOLIDWORKS Flow Simulation 2021: Animations Automatic and Manual Meshing Boundary Conditions Calculation Control Options External and Internal Flow Goals Laminar and Turbulent Flow Physical Features Result Visualizations Two and Three Dimensional Flow Velocity, Thermodynamic and Turbulence Parameters Wall Thermal Conditions Free Surfaces

Thermal Analysis with SOLIDWORKS Simulation 2019 and Flow Simulation 2019
Thermal Analysis with SOLIDWORKS Simulation 2019 and Flow Simulation 2019

Author: Paul Kurowski

Publisher: SDC Publications

Published: 2019

Total Pages: 307

ISBN-13: 163057242X

DOWNLOAD EBOOK

Thermal Analysis with SOLIDWORKS Simulation 2019 goes beyond the standard software manual. It concurrently introduces the reader to thermal analysis and its implementation in SOLIDWORKS Simulation using hands-on exercises. A number of projects are presented to illustrate thermal analysis and related topics. Each chapter is designed to build on the skills and understanding gained from previous exercises. Thermal Analysis with SOLIDWORKS Simulation 2019 is designed for users who are already familiar with the basics of Finite Element Analysis (FEA) using SOLIDWORKS Simulation or who have completed the book Engineering Analysis with SOLIDWORKS Simulation 2019. Thermal Analysis with SOLIDWORKS Simulation 2019 builds on these topics in the area of thermal analysis. Some understanding of FEA and SOLIDWORKS Simulation is assumed.

SOLIDWORKS 2019 Tutorial
SOLIDWORKS 2019 Tutorial

Author: David Planchard

Publisher: SDC Publications

Published: 2018-12-21

Total Pages: 642

ISBN-13: 1630572381

DOWNLOAD EBOOK

SOLIDWORKS 2019 Tutorial is written to assist students, designers, engineers and professionals who are new to SOLIDWORKS. The text provides a step-by-step, project based learning approach. It also contains information and examples on the five categories in the CSWA exam. The book is divided into four sections. Chapters 1 - 5 explore the SOLIDWORKS User Interface and CommandManager, Document and System properties, simple and complex parts and assemblies, proper design intent, design tables, configurations, multi-sheet, multi-view drawings, BOMs, and Revision tables using basic and advanced features. In chapter 6 you will create the final robot assembly. The physical components and corresponding Science, Technology, Engineering and Math (STEM) curriculum are available from Gears Educational Systems. All assemblies and components for the final robot assembly are provided. Chapters 7 - 10 prepare you for the Certified Associate - Mechanical Design (CSWA) exam. The certification indicates a foundation in and apprentice knowledge of 3D CAD and engineering practices and principles. Chapter 11 covers the benefits of additive manufacturing (3D printing), how it differs from subtractive manufacturing, and its features. You will also learn the terms and technology used in low cost 3D printers. Follow the step-by-step instructions and develop multiple assemblies that combine over 100 extruded machined parts and components. Formulate the skills to create, modify and edit sketches and solid features. Learn the techniques to reuse features, parts and assemblies through symmetry, patterns, copied components, apply proper design intent, design tables and configurations. Learn by doing, not just by reading. Desired outcomes and usage competencies are listed for each chapter. Know your objective up front. Follow the steps in each chapter to achieve your design goals. Work between multiple documents, features, commands, custom properties and document properties that represent how engineers and designers utilize SOLIDWORKS in industry.

Introduction to Finite Element Analysis Using SolidWorks Simulation 2011
Introduction to Finite Element Analysis Using SolidWorks Simulation 2011

Author: Randy Shih

Publisher: SDC Publications

Published: 2011-01-20

Total Pages: 457

ISBN-13: 1585036307

DOWNLOAD EBOOK

The primary goal of Introduction to Finite Element Analysis Using SolidWorks Simulation 2011 is to introduce the aspects of Finite Element Analysis (FEA) that are important to engineers and designers. Theoretical aspects of Finite Element Analysis are also introduced as they are needed to help better understand the operation. The primary emphasis of the text is placed on the practical concepts and procedures needed to use SolidWorks Simulation in performing Linear Static Stress Analysis and basic Model Analysis. This text covers SolidWorks Simulation and the lessons proceed in a pedagogical fashion to guide you from constructing basic truss elements to generating three-dimensional solid elements from solid models. This text takes a hands-on, exercise-intensive approach to all the important Finite Element Analysis techniques and concepts. This textbook contains a series of thirteen tutorial style lessons designed to introduce beginning FEA users to SolidWorks Simulation. The basic premise of this book is that the more designs you create using SolidWorks Simulation, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons.

Motion Simulation and Mechanism Design with SOLIDWORKS Motion 2019
Motion Simulation and Mechanism Design with SOLIDWORKS Motion 2019

Author: Kuang-Hua Chang

Publisher: SDC Publications

Published: 2019-09-04

Total Pages: 225

ISBN-13: 1630572411

DOWNLOAD EBOOK

Motion Simulation and Mechanism Design with SOLIDWORKS Motion 2019 is written to help you become familiar with SOLIDWORKS Motion, an add-on module of the SOLIDWORKS software family. This book covers the basic concepts and frequently used commands required to advance readers from a novice to intermediate level in using SOLIDWORKS Motion. SOLIDWORKS Motion allows you to use solid models created in SOLIDWORKS to simulate and visualize mechanism motion and performance. Using SOLIDWORKS Motion early in the product development stage could prevent costly redesign due to design defects found in the physical testing phase. Therefore, using SOLIDWORKS Motion contributes to a more cost effective, reliable, and efficient product design process. Basic concepts discussed in this book include model generation, such as creating assembly mates for proper motion; carrying out simulation and animation; and visualizing simulation results, such as graphs and spreadsheet data. These concepts are introduced using simple, yet realistic examples. Verifying the results obtained from the computer simulation is extremely important. One of the unique features of this book is the incorporation of theoretical discussions for kinematic and dynamic analyses in conjunction with the simulation results obtained using SOLIDWORKS Motion. Verifying the simulation results will increase your confidence in using the software and prevent you from being fooled by erroneous simulations.

Engineering Analysis with SOLIDWORKS Simulation 2019
Engineering Analysis with SOLIDWORKS Simulation 2019

Author: Paul Kurowski

Publisher: SDC Publications

Published: 2019

Total Pages: 609

ISBN-13: 1630572373

DOWNLOAD EBOOK

Engineering Analysis with SOLIDWORKS Simulation 2019 goes beyond the standard software manual. Its unique approach concurrently introduces you to the SOLIDWORKS Simulation 2019 software and the fundamentals of Finite Element Analysis (FEA) through hands-on exercises. A number of projects are presented using commonly used parts to illustrate the analysis features of SOLIDWORKS Simulation. Each chapter is designed to build on the skills, experiences and understanding gained from the previous chapters. Topics covered Linear static analysis of parts and assembliesContact stress analysisFrequency (modal) analysisBuckling analysisThermal analysisDrop test analysisNonlinear analysisDynamic analysisRandom vibration analysish and p adaptive solution methodsModeling techniquesImplementation of FEA in the design processManagement of FEA projectsFEA terminology