Introductory technical guidance for electrical engineers and other professional engineers and construction managers interested in electrical distribution system microgrids. Here is what is discussed: 1. OVERVIEW, 2. MICROGRID OVERVIEW AND GENERAL KNOWLEDGE, 3. SITE EVALUATION AND FEASIBILITY DETERMINATION.
Introductory technical guidance for professional engineers interested in resilient microgrid electric power distribution systems. Here is what is discussed: 1. INTRODUCTION, 2. TECHNICAL REQUIREMENTS, 3. PERFORMANCE METRICS, 4. PLANNING, DESIGN AND ACQUISITION.
DC electric power distribution systems have higher efficiency, better current carrying capacity and faster response when compared to conventional AC systems. They also provide a more natural interface with many types of renewable energy sources. Furthermore, there are fewer issues with reactive power flow, power quality and frequency regulation, resulting in a notably less complex control system. All these facts lead to increased applications of DC systems in modern power systems. Still, design and operation of these systems imposes a number of specific challenges, mostly related to lack of mature protection technology and operational experience, as well as very early development stage of standards regarding DC based power infrastructure.
Microgrids and Active Distribution Networks offer a potential solution for sustainable, energy-efficient power supply to cater for increasing load growth, supplying power to remote areas, generation of clean power and reduction in emission of greenhouse gases & particulates as per Kyoto protocol.
As the electrical industry continues to develop, one sector that still faces a range of concerns is the electrical distribution system. Excessive industrialization and inadequate billing are just a few issues that have plagued this electrical sector as it advances into the smart grid environment. Research is necessary to explore the possible solutions in fixing these problems and developing the distribution sector into an active and smart system. The Handbook of Research on New Solutions and Technologies in Electrical Distribution Networks is a collection of innovative research on the methods and applications of solving major issues within the electrical distribution system. Some issues covered within the publication include distribution losses, improper monitoring of system, renewable energy integration with micro-grid and distributed energy sources, and smart home energy management system modelling. This book is ideally designed for power engineers, electrical engineers, energy professionals, developers, technologists, policymakers, researchers, academicians, industry professionals, and students seeking current research on improving this key sector of the electrical industry.
Discover scalable, dependable, intelligent solutions for integrating complex networked microgrids with this definitive guide. Combining resilient control, fast programmable networking, reachability analysis, and cyber-physical security, this is essential reading for researchers, professional engineers, and graduate students.
DC MICROGRIDS Written and edited by a team of well-known and respected experts in the field, this new volume on DC microgrids presents the state-of-the-art developments and challenges in the field of microgrids for sustainability and scalability for engineers, researchers, academicians, industry professionals, consultants, and designers. The electric grid is on the threshold of a paradigm shift. In the past few years, the picture of the grid has changed dramatically due to the introduction of renewable energy sources, advancements in power electronics, digitalization, and other factors. All these megatrends are pointing toward a new electrical system based on Direct Current (DC). DC power systems have inherent advantages of no harmonics, no reactive power, high efficiency, over the conventional AC power systems. Hence, DC power systems have become an emerging and promising alternative in various emerging applications, which include distributed energy sources like wind, solar and Energy Storage System (ESS), distribution networks, smart buildings, remote telecom systems, and transport electrification like electric vehicles (EVs). All these applications are designed at different voltages to meet their specific requirements individually because of the lack of standardization. Thus, the factors influencing the DC voltages and system operation needed to be surveyed and analyzed, which include voltage standards, architecture for existing and emerging applications, topologies and control strategies of power electronic interfaces, fault diagnosis and design of the protection system, optimal economical operation, and system reliability.
This book covers all important, new, and conventional aspects of building electrical systems, power distribution, lighting, transformers and rotating electric machines, wiring, and building installations. Solved examples, end-of-chapter questions and problems, case studies, and design considerations are included in each chapter, highlighting the concepts, and diverse and critical features of building and industrial electrical systems, such as electric or thermal load calculations; wiring and wiring devices; conduits and raceways; lighting analysis, calculation, selection, and design; lighting equipment and luminaires; power quality; building monitoring; noise control; building energy envelope; air-conditioning and ventilation; and safety. Two chapters are dedicated to distributed energy generation, building integrated renewable energy systems, microgrids, DC nanogrids, power electronics, energy management, and energy audit methods, topics which are not often included in building energy textbooks. Support materials are included for interested instructors. Readers are encouraged to write their own solutions while solving the problems, and then refer to the solved examples for more complete understanding of the solutions, concepts, and theory.
Smart Power Distribution Systems: Control, Communication, and Optimization explains how diverse technologies work to build and maintain smart grids around the globe. Yang, Yang and Li present the most recent advances in the control, communication and optimization of smart grids and provide unique insight into power system control, sensing and communication, and optimization technologies. The book covers control challenges for renewable energy and smart grids, communication in smart power systems, and optimization challenges in smart power system operations. Each area discussed focuses on the scientific innovations relating to the approaches, methods and algorithmic solutions presented. Readers will develop sound knowledge and gain insights into the integration of renewable energy generation in smart power distribution systems. - Presents the latest technological advances in electric power distribution networks, with a particular focus on methodologies, approaches and algorithms - Provides insights into the most recent research and developments from expert contributors from across the world - Presents a clear and methodical structure that guides the reader through discussion and analysis, providing unique insights and sound knowledge along the way
This book provides a comprehensive overview on the latest developments in the control, operation, and protection of microgrids. It provides readers with a solid approach to analyzing and understanding the salient features of modern control and operation management techniques applied to these systems, and presents practical methods with examples and case studies from actual and modeled microgrids. The book also discusses emerging concepts, key drivers and new players in microgrids, and local energy markets while addressing various aspects from day-ahead scheduling to real-time testing of microgrids. The book will be a valuable resource for researchers who are focused on control concepts, AC, DC, and AC/DC microgrids, as well as those working in the related areas of energy engineering, operations research and its applications to energy systems. Presents modern operation, control and protection techniques with applications to real world and emulated microgrids; Discusses emerging concepts, key drivers and new players in microgrids and local energy markets; Addresses various aspects from day-ahead scheduling to real-time testing of microgrids.
