This book examines an intelligent system for the inspection planning of prismatic parts on coordinate measuring machines (CMMs). The content focuses on four main elements: the engineering ontology, the model of inspection planning for prismatic parts on CMMs, the optimisation model of the measuring path based on an ant-colony approach, and the model of probe configuration and setup planning based on a genetic algorithm. The model of inspection planning for CMMs developed here addresses inspection feature construction, the sampling strategy, probe accessibility analysis, automated collision-free operation, and probe path planning. The proposed model offers a novel approach to intelligent inspection, while also minimizing human involvement (and thus the risk of human error) through intelligent planning of the probe configuration and part setup. The advantages of this approach include: reduced preparation times due to the automatic generation of a measuring protocol; potential optimisation of the measuring probe path, i.e., less time needed for the actual measurement; and increased planning process autonomy through minimal human involvement in the setup analysis and probe configuration.
Smart VR/AR/MR Systems for Professionals is a comprehensive guide that explores the ground-breaking applications of virtual reality (VR), augmented reality (AR), and mixed reality (MR) in various industries. This book aims to equip practicing professionals with the knowledge and insights they need to harness the full potential of these immersive technologies in their respective fields. Through this book, the authors aim to explore the experimental breakthroughs and cutting-edge methodologies that have emerged in the realm of VR/AR/MR. The book delves deeper into the profound impact these technologies have had on the design process, computer-aided design, healthcare product development, manufacturing, human-robot collaboration, medical imaging, rehabilitation, and even phobia therapy. In each chapter of this book, we delve into specific topics, uncovering the principles, methodologies, and best practices that professionals can adopt. Examples of these topics range from empowering design processes with virtual reality to revolutionizing computer-aided design, and from exploring AR/VR/MR technologies in healthcare to transforming manufacturing with digital twins and metrology in VR. The book aims to provide practitioners with valuable insights, real-world examples, and practical guidance to navigate the ever-evolving landscape of VR/AR/MR systems.
This book gathers the proceedings of the 12th International Conference on Measurement and Quality Control – Cyber Physical Issues (IMEKO TC 14 2019), held in Belgrade, Serbia, on 4–7 June 2019. The event marks the latest in a series of high-level conferences that bring together experts from academia and industry to exchange knowledge, ideas, experiences, research findings, and information in the field of measurement of geometrical quantities. The book addresses a wide range of topics, including: 3D measurement of GPS characteristics, measurement of gears and threads, measurement of roughness, micro- and nano-metrology, laser metrology for precision measurements, cyber physical metrology, optical measurement techniques, industrial computed tomography, multisensor techniques, intelligent measurement systems, evaluating measurement uncertainty, dimensional management in industry, product quality assurance methods, and big data analytics. By providing updates on key issues and highlighting recent advances in measurement and quality control, the book supports the transfer of vital knowledge to the next generation of academics and practitioners.
This book gathers the proceedings of the 5th International Conference on the Industry 4.0 Model for Advanced Manufacturing (AMP 2020), held in Belgrade, Serbia, on 1–4 June 2020. The event marks the latest in a series of high-level conferences that bring together experts from academia and industry to exchange knowledge, ideas, experiences, research findings, and information in the field of manufacturing. The book addresses a wide range of topics, including: design of smart and intelligent products, developments in CAD/CAM technologies, rapid prototyping and reverse engineering, multistage manufacturing processes, manufacturing automation in the Industry 4.0 model, cloud-based products, and cyber-physical and reconfigurable manufacturing systems. By providing updates on key issues and highlighting recent advances in manufacturing engineering and technologies, the book supports the transfer of vital knowledge to the next generation of academics and practitioners. Further, it will appeal to anyone working or conducting research in this rapidly evolving field.
This proceedings book offers a collection of high-quality, peer-reviewed research papers presented at the International Conference of Experimental and Numerical Investigations and New Technologies (CNNTech2019) held in Zlatibor, Serbia, from 2 to 5 July 2019. Discussing various industrial, engineering and scientific applications of the engineering techniques, it provides researchers from academia and industry with a platform to present their original work and exchange ideas, experiences, information, techniques, applications and innovations in the fields of mechanical engineering, materials science, chemical and process engineering, experimental techniques, numerical methods and new technologies.
The inspection process is one of the most important steps in manufacturing industries because it safeguards high quality products and customer satisfaction. Manual inspection may not provide the desired accuracy. This book introduces and implements a new methodology and develops the supporting technologies for automated inspection planning based on Computer Aided Design (CAD) models. It also provides and implements an efficient link for automated operation based on Coordinate Measuring Machine (CMM). The link’s output is a DMIS code programming file based on the inspection planning table that is executed on CMM.
Well known researchers in all areas related to featured based manufacturing have contributed chapters to this book. Some of the chapters are surveys, while others review a specific technique. All contributions, including those from the editors, were thoroughly refereed. The goal of the book is to provide a comprehensive picture of the present stage of development of Features Technology from the point of view of applications in manufacturing. The book is aimed at several audiences. Firstly, it provides the research community with an overview of the present state-of-the-art features in manufacturing, along with references in the literature. Secondly, the book will be useful as supporting material for a graduate-level course on product modeling and realization. Finally, the book will also be valuable to industrial companies who are assessing the significance of features for their business.
We, the Department of Production Engineering, PSG College of Technology, Coimbatore, Tamil Nadu, India, are delighted to introduce the proceedings of the International Conference on the Advancements in Materials, Design, and Manufacturing for Sustainable Development ICAMDMS 2024. The conference proceedings encapsulate the knowledge of diverse insights and cutting-edge research shared by the participants of the conference in significant domains such as materials, design, manufacturing, industrial and production engineering converging on the theme of sustainable development. The technical program of ICAMDMS 2024 consists of 46 full papers, including nine oral presentation sessions at the main conference themes. The conference themes are: Track 1 – Advanced Materials; Track 2 - Design; Track 3 - Manufacturing; and Track 4 – Industrial and Production Engineering. Aside from the high-quality technical paper presentations, the technical program also featured eight keynote lectures. The eight keynote speakers are (1) Dr. Redouane Zitoune from Paul Sabatier University, Toulose-III, France, (2) Dr. Jinyang Xu from Shanghai Jiao Tong University, China, (3) Dr. Juan Pablo from Escobedo-Daiz UNSW, Canberra, Australia, (4) Dr. Santhakumar Mohan from IIT Palakkad, (5) Dr. Afzaal Ahmed from IIT Palakkad, (6) Dr. Ravi K R from IIT Jodhpur, (7) Mr. Vijay V from Lakshmi Machine Works – Advanced Technology Center, Coimbatore and (8) Ms. Thangamalar from Research and Development, Tractors and Farm Equipment (TAFE), Chennai. The Conference was enlightened with an industrial talk by Dr. S. Chandrasekar, Corporate Director, Roots Group of Companies, Coimbatore. ICAMDMS 2024 was sponsored by Propel Industries Pvt. Ltd., Coimbatore, PSG Centre for Academic Research and Excellence, Coimbatore, Janatics India Pvt. Ltd., Coimbatore, Baarga Die Castings, Coimbatore, Crossfields Water Purifiers Pvt. Ltd., Coimbatore, TESA Technology, Coimbatore, Guruvayurappan Textile Pvt. Ltd., Udumalpet, Sakthi Gear Products, Coimbatore and 2017-21 and 2018-22 alumni of the Department of Production Engineering. In this compendium, one can find a wealth of knowledge covering advanced materials, innovative designs, and sustainable manufacturing practices. We extend our gratitude to the Management & Principal - PSGCT, Head of the Department – Production Engineering, ICAMDMS 2024 advisory committee, conference committee, sponsors, participants, faculty members, staff, and students who have contributed to the ICAMDMS 2024 and made it a platform for meaningful discourse. As we delve into this intellectual journey, we anticipate that this proceeding will be a valuable resource for researchers, academicians, and professionals worldwide, fostering collaboration and inspiring future endeavors toward achieving a sustainable environment. Dr R Rudramoorthy, Dr. M. Senthilkumar, Dr. M. R. Pratheesh Kumar, Dr. J. Pradeep Kumar Dr. R. Rajamani and Dr.J.Baskaran
