In contrast to research on the fundamental mechanisms of High-Temperature Superconductivity, in recent years we have seen enormous developments in the fabrication and application of High-Tc-superconductors. The two volumes of High Temperature Superconductivity provide a survey of the state of the technology and engineering applications of these materials. They comprise extended original research papers and technical review articles written by physicists, chemists, materials scientists and engineers, all of them noted experts in their fields. The interdisciplinary and strictly application-oriented coverage should benefit graduate students and academic researchers in the mentioned areas as well as industrial experts. Volume 1 "Materials" focuses on major technical advancements in High-Tc materials processing for applications. Volume 2 "Engineering Applications" covers numerous application areas where High-Tc superconductors are making tremendous impact.
Prof. Heike Kamerlingh Onnes discovered superconductivity while measuring resistivity of mercury. Surprisingly the resistivity of mercury ceased at 4.2 K and this phenomenon was known as superconductivity. He realized the importance of this discovery in producing large magnetic fieldspl. delateIt was realized that superconductivity is in a new thermodynamic state with peculiar electric and magnetic properties. This paved the way to discover more superconductors. Simple elements such as Tin, Indium or lead showed the highest critical temperature (Tc) 7.2 K. They were called as Type 1 superconductors. Niobium-nitride was found to superconduct at 16 K at 1941 and Vanadium-silicon showed superconductive properties at 17.5 K at 1953. Nb alloys and binary or more complex compounds such as Nb3Sn (Tc – 18 K), Nb-Ti (Tc -9 K), Ga, V with Tc,23 K became type II superconductors. Thereafter, there was not much improvement in the development of superconductor although wonderful applications were expected from superconductors. After three decades, Fullerenes, like ceramic superconductors, are discovered. A decade ago MgB2 was discovered with Tc = 39 K. These superconductors were routinely produced into formof wires for producing larger magnetic fields. In all these cases cooling was effectively done by liquid Helium. A comprehensive microscopic theory of superconductivity in metals was proposed in 1957 by John Bardeen, Leon Cooper and Robert Schrieffer (the so-called “BCS” theory) for which they received the Nobel Prize in Physics. In a major breakthrough, George Bednorz and Karl Mueller discovered a brittle ceramic superconductivity in the family of cuprates at 30 K in 1986 and a new era began. Inspired by the work of Bednorz and Mueller on high temperature superconductivity (HTS), Paul Chu and his associates at the University of Houston discovered in 1987, 123 compounds. That is, YBCO (Yttrium1- Barium2-Copper3- Oxygen7) and iso-structural RBCO (Rare-earth1-Barium2-Copper3-Oxygen7) have a Tc of 93 K. Prior to 1987, all superconducting materials had lower critical temperatures (Tc’s) and therefore functioned only at temperatures near the boiling point of liquid helium (4.2 K) or liquid hydrogen (20.28 K), with the highest being Nb3Ge at 23 K. They were known as low temperature superconductors. YBCO was the first material to become superconducting above 77 K, (boiling point of liquid nitrogen) and subsequently a series of high temperature superconducting materials were discovered. These superconducting materials are widely known as High temperature superconductors as these Tc’s exceeded the limit prescribed by BCS theory. HTSCs are potentially valuable as liquid nitrogen is cheaper than liquid helium. YBCO possesses superior superconducting and physical properties. YBCO receiver coils in NMR-spectrometers have improved the resolution NMR spectrometers by a factor of 3 compared to that achievable with conventional coils. Paul Chu’s group holds the current Tc-record of 164 K in the mercury barium based cuprate superconductor under pressure. Their work led to a rapid succession of new high temperature superconducting materials, ushering in a new era in material science, chemistry and technology. Added to this the structure of Bi2Sr2Ca2Cu2O10(BiSCCO) high temperature superconductive compound having T= 110 K was reported. In 1993, mercuric-cuprates, perovskite ceramic superconductors with the transition temperatures Tc =138 K was also reported.
Since the 1980s, a general theme in the study of high-temperature superconductors has been to test the BCS theory and its predictions against new data. At the same time, this process has engendered new physics, new materials, and new theoretical frameworks. Remarkable advances have occurred in sample quality and in single crystals, in hole and electron doping in the development of sister compounds with lower transition temperatures, and in instruments to probe structure and dynamics. Handbook of High-Temperature Superconductvity is a comprehensive and in-depth treatment of both experimental and theoretical methodologies by the the world's top leaders in the field. The Editor, Nobel Laureate J. Robert Schrieffer, and Associate Editor James S. Brooks, have produced a unified, coherent work providing a global view of high-temperature superconductivity covering the materials, the relationships with heavy-fermion and organic systems, and the many formidable challenges that remain.
This thesis introduces a systematic study on Second Generation (2G) High Temperature Superconductors (HTS), covering a novel design of an advanced medical imaging device using HTS, and an in-depth investigation on the losses of HTS. The text covers the design and simulation of a superconducting Lorentz Force Electrical Impedance Tomography. This is potentially a significant medical device that is more efficient and compact than an MRI, and is capable of detecting early cancer, as well as other pathologies such stroke and internal haemorrhages. It also presents the information regarding the fundamental physics of superconductivity, concentrating on the AC losses in superconducting coils and tapes. Overall, the thesis signifies an important contribution to the investigation of High Temperature Superconductors. This thesis will be beneficial to the development of advanced superconducting applications in healthcare as well as more broadly in electrical and energy systems.
The achievement of large critical currents is critical to the applications of high-temperature superconductors. Recent developments have shown that melt processing is suitable for producing high Jc oxide superconductors. Using magnetic forces between such high Jc oxide superconductors and magnets, a person could be levitated.This book has grown largely out of research works on melt processing of high-temperature superconductors conducted at ISTEC Superconductivity Research Laboratory. The chapters build on melt processing, microstructural characterization, fundamentals of flux pinning, critical current, and applications of bulk monolithic superconductors. The text also describes the basic mechanism of levitation and its application. This book will be useful for research workers, engineers, and graduate students in the field of superconductivity.List of Authors: H Fujimoto, S Gotoh, T Izumi; N Koshizuka, K Miya, M Murakami, N Nakamura, Y Nakamura, Y Shiohara, H Takaichi, T Taguchi, M Uesaka, H W Weber, K Yamaguchi.
High temperature superconductors (HTS) offer many advantages through their application in electrical systems, including high efficiency performance and high throughput with low-electrical losses. While cryogenic cooling and precision materials manufacture is required to achieve this goal, cost reductions without significant performance loss are being achieved through the advanced design and development of HTS wires, cables and magnets, along with improvements in manufacturing methods. This book explores the fundamental principles, design and development of HTS materials and their practical applications in energy systems. Part one describes the fundamental science, engineering and development of particular HTS components such as wires and tapes, cables, coils and magnets and discusses the cryogenics and electromagnetic modelling of HTS systems and materials. Part two reviews the types of energy applications that HTS materials are used in, including fault current limiters, power cables and energy storage, as well as their application in rotating machinery for improved electrical efficiencies, and in fusion technologies and accelerator systems where HTS magnets are becoming essential enabling technologies. With its distinguished editor and international team of expert contributors, High temperature superconductors (HTS) for energy applications is an invaluable reference tool for anyone involved or interested in HTS materials and their application in energy systems, including materials scientists and electrical engineers, energy consultants, HTS materials manufacturers and designers, and researchers and academics in this field.
Advances through carefully conducted quantitative work on well designed, high quality materials characterize the present state of high-temperature superconductivity research. The contributions to this volume present a theoretical and experimental overview of electronic structure and physical properties, including anisotropic features, of high-temperative materials, with a focus on cuprates. In order to enhance the understanding of the mechanisms of superconductivity at high temperatures, this volume is divided into theoretical and experimental parts. The contributions to the two parts correspond to each other, giving readers involved in either area of research activity a reference to findingsof the other. On the other hand, this book gives young physicists high-level information on the present state of research, enhanced by tutorial contributions of leading physicists in the field.
Since the discovery in 1986 of high temperature superconductors by J. G. Bednorz and K. A. Müller, a considerable progress has been made and several important scientific problems have emerged. Within this NATO Advanced Study Institute our intention was to focus mainly on the controversial topic of the symmetry of the superconducting gap and given the very short coherence length, the role of fluctuations. The Institute on ‘The Gap Symmetry and Fluctuations in High- Superconductors’ took place in the “Institut d’Etudes Scientifiques de Cargèse” in Corsica, France, between 1 - 13 September 1997. The 110 participantsfrom 18 countries (yet 30 nationalities) including 23 full time lecturers, have spent two memorable weeks in this charming Mediterranean resort. All lecturers were asked to prepare pedagogical papers to clearly present the central physical idea behind specific model or experiment. The better understanding of physics of high temperature superconductivity is certainly needed to guide the development of applications of these materials in high and weak current devices.
This book, in essence the proceedings of a NATO Advanced Study Institute with the same title, is designed to provide in-depth coverage of many, but not all, of the major current applications of superconductivity, and of many that still are being developed. It will be of value to scientists and engineers who have interests in the research and production aspects of the technology, as well as in the applications themselves. The ftrst three chapters (by Clarke, Vrba and Wikswo) are devoted to an understanding of the principles, fabrication and uses of SQUID magnetometers and gradiometers, with the greatest emphasis on biomagnetism and nondestructive evaluation (NDE). For the most part, traditional low-temperature superconductor (LTS) SQUIDs are used, but particularly for NDE, high-temperature superconductor (HTS) SQUIDs are proving useful and often more convenient. The succeeding three chapters (by Przybysz, Likharev and Chaloupka) cover broader aspects of superconducting electronics. The ftrst two of these deal primarily with digital L TS circuits, while the third discusses in great detail passive component applications using HTS materials. Currently, HTS ftlters are undergoing intense J3-site testing at cellular telephone base stations. While it is clear that HTS ftlters outperform conventional ftlters in reducing signal loss and allowing for more channels in a given bandwidth, it isn't yet certain that the cellular telephone industry sees sufficient economic beneftts to make a ftrm decision to use HTS ftlters universally in its systems. If this application is generally adapted, the market for these ftlters should be quite large.
Even a hundred years after its discovery, superconductivity continues to bring us new surprises, from superconducting magnets used in MRI to quantum detectors in electronics. 100 Years of Superconductivity presents a comprehensive collection of topics on nearly all the subdisciplines of superconductivity. Tracing the historical developments in supe