Additives for Polyolefins
Additives for Polyolefins

Author: Michael Tolinski

Publisher: William Andrew

Published: 2009-09-22

Total Pages: 295

ISBN-13: 0815520522

DOWNLOAD EBOOK

This book focuses on the polyolefin additives that are currently important in the plastics industry, alongside new additives of increasing interest, such as nanofillers and environmentally sustainable materials. As much as possible, each chapter emphasizes the performance of the additives in the polymer, and the value each relevant additive brings to polypropylene or polyethylene. Where possible, similar additives are compared by capability and relative cost. With major sections for each additive function, this book provides a highly practical guide for engineers and scientists creating and using polyolefin compounds, who will find in this book a wealth of detail and practical guidance. This unique resource will enable them to make practical decisions about the use of the various additives, fillers, and reinforcements specific to this family of materials. ABOUT THE AUTHOR Michael Tolinski is a freelance writer and a lecturer at the University of Michigan's College of Engineering. He is a frequent contributor to Plastics Engineering and Manufacturing Engineering. - Structured to make it easy for the reader to find solutions for specific property requirements - Contains a number of short case studies about companies that have used or developed a particular additive to achieve a desired result - Covers environmental resistance, mechanical property enhancement, appearance enhancement, processing aids, and other modifications of form and function

Additives for Polyolefins
Additives for Polyolefins

Author: Michael Tolinski

Publisher: William Andrew

Published: 2015-03-17

Total Pages: 234

ISBN-13: 0323371779

DOWNLOAD EBOOK

Additives for Polyolefins is a unique quick-reference resource for those who create or use polyethylene and polypropylene compounds—the most commercially important family of plastic materials, making up close to half of the volume all plastics produced and used. These polymers would be useless without various additives. The book focuses on polyolefin additives that are currently important in the plastics industry, alongside new additives of increasing interest, such as nanofillers and environmentally sustainable materials. As much as possible, each chapter emphasises the performance of the additives in the polymer, and the value each relevant additive brings to polypropylene or polyethylene. Where possible, similar additives are compared by capability and relative cost. In this new edition, product tables have been updated with the most current product and company names, new case studies have been added, the role of nanofillers is discussed in greater detail, and the book concludes with a discussion on blending and handling additives, along with an entirely new chapter on how engineers can approach the issue of sustainability when choosing an additive. - Assesses capabilities and costs of a range of additives to enable engineers and scientists to make the correct selection for their property requirements - Provides concise, practical information about the purpose and use of specific additives, fillers, and reinforcements – demystifying the world of additives by providing clear, engineering explanations, and including real-world application case stories - Updated to include additional material on nanofillers, blending and handling, and sustainability

Polyolefin Compounds and Materials
Polyolefin Compounds and Materials

Author: Mariam Al-Ali AlMa'adeed

Publisher: Springer

Published: 2015-12-23

Total Pages: 354

ISBN-13: 3319259822

DOWNLOAD EBOOK

This book describes industrial applications of polyolefins from the researchers' perspective. Polyolefins constitute today arguably the most important class of polymers and polymeric materials for widespread industrial applications. This book summarizes the present state of the art. Starting from fundamental aspects, such as the polymerization techniques to synthesize polyolefins, the book introduces the topic. Basic knowledge about polyolefin composites and blends is explained, before applications aspects in different industry sectors are discussed. The spectrum comprises a wide range of applications and industry sectors, such as the packaging and food industry, the textile industry, automotive and buildings, and even biomedical applications. Topics, which are addressed in the various chapters, comprise synthesis and processing of the materials; their classification; mechanical, physical and technical requirements and properties; their characterization; and many more. In the end of the book, even the disposal, degradation and recycling of polyolefins are addressed, and light is shed on their commercial significance and economic value. In this way, the book follows the entire 'lifetime' of polyolefin compounds and materials: from their synthesis and processing, over applications, to the recycling and reuse of disposed or degraded polyolefin substrates.

Plastics Additives
Plastics Additives

Author: G. Pritchard

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 650

ISBN-13: 9401158622

DOWNLOAD EBOOK

Although plastics are extremely successful commercially, they would never reach acceptable performance standards either in properties or processing without the incorporation of additives. With the inclusion of additives, plastics can be used in a variety of areas competing directly with other materials, but there are still many challenges to overcome. Some additives are severely restricted by legislation, others interfere with each other-in short their effectiveness varies with circumstances. Plastics Additives explains these issues in an alphabetical format making them easily accessible to readers, enabling them to find specific information on a specific topic. Each additive is the subject of one or more articles, providing a suffinct account of each given topic. An international group of experts in additive and polymer science, from many world class companies and institutes, explain the recent rapid changes in additive technology. They cover novel additives (scorch inhibitors, compatibilizers, surface-modified particulates etc.), the established varieties (antioxidants, biocides, antistatic agents, nucleating agents, fillers, fibres, impact modifiers, plasticizers) and many others, the articles also consider environmental concerns, interactions between additives and legislative change. With a quick reference guide and introductory articles that provide the non-specialist and newcomer with relevant information, this reference book is essential reading for anyone concerned with plastics and additives.

Handbook of Polyolefins
Handbook of Polyolefins

Author: Cornelia Vasile

Publisher: CRC Press

Published: 2000-06-21

Total Pages: 1040

ISBN-13: 9780203908716

DOWNLOAD EBOOK

A handbook on polyolefins. This second edition includes new material on the structure, morphology and properties of polyolefin (PO) synthesis. It focuses on synthetic advances, the use of additives, special coverage of PO blends, composites and fibres, and surface treatments. It also addresses the problem of interfacial and superficial phenomena.

Additives for Plastics Handbook
Additives for Plastics Handbook

Author: J. Murphy

Publisher: Elsevier

Published: 2001-11-22

Total Pages: 507

ISBN-13: 0080498612

DOWNLOAD EBOOK

Both technically and economically, additives form a large and increasingly significant part of the polymer industry, both plastics and elastomers. Since the first edition of this book was published, there have been wide-ranging developments, covering chemistry and formulation of new and more efficient additive systems and the safer use of additives, both by processors in the factory and, in the wider field, as they affect the general public. This new edition follows the successful formula of its predecessor, it provides a comprehensive view of all types of additives, concentrating mainly on their technical aspects (chemistry/formulation, structure, function, main applications) with notes on the commercial background of each. The field has been expanded to include any substance that is added to a polymer to improve its use, so including reinforcing materials (such as glass fibre), carbon black and titanium dioxide. This is a book which has been planned for ease of use and the information is presented in a way which is appropriate to the users' needs.

Polymer Additives
Polymer Additives

Author: Jiri E. Kresta

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 403

ISBN-13: 1461327970

DOWNLOAD EBOOK

Ever since the beginning of the plastics and rubber industry, it was realized that useful products could be produced only if cer tain additives were incorporated into polymers. With the help of these additives, when physically dispersed in a polymer matrix, it has been possible to improve stability against thermal, oxidative, UV, hydrolytic and biological degradation, mechanical properties, flammability, cost, and processibility of plastics. The enormous growth of the volume of plastics consumed by modern society, and new application areas for plastics, have created a demand for new, better additives and better understanding of their functions in polymer systems. As a result of these trends there is a need for sharing of information on progress achieved in the area of polymer additives among engineers and scientists of the plastics industry and academia. This book is based on expanded and updated papers originally presented at the International Symposium on Polymer Additives, which was held in Las Vegas, Nevada, and was sponsored by the American Chemical Society, Division of Polymeric Materials Science and Engi neering. The book is divided into five parts which cover advances in various areas of polymer additives. The first part is devoted to the progress in understanding of UV degradation and stabilization of various polymers. Oxidation degradation and stabilization of plastic materials is covered in the second part. New developments in the stabilization of PVC are presented in the third part.

Mould Sticking, Fouling and Cleaning
Mould Sticking, Fouling and Cleaning

Author: David Packham

Publisher: iSmithers Rapra Publishing

Published: 2002

Total Pages: 130

ISBN-13: 9781859573570

DOWNLOAD EBOOK

This review first discusses mould release and then addresses mould fouling. Significant material and process variables are considered first and then practical guidance on the selection of release agents and surface treatments are addressed. This is followed by advice on mould cleaning and the assessment of mould sticking and mould fouling. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database gives useful references for further reading.

Additives in Polymers
Additives in Polymers

Author: Jan C. J. Bart

Publisher: John Wiley & Sons

Published: 2005-04-08

Total Pages: 836

ISBN-13: 0470012056

DOWNLOAD EBOOK

This industrially relevant resource covers all established and emerging analytical methods for the deformulation of polymeric materials, with emphasis on the non-polymeric components. Each technique is evaluated on its technical and industrial merits. Emphasis is on understanding (principles and characteristics) and industrial applicability. Extensively illustrated throughout with over 200 figures, 400 tables, and 3,000 references.

Additives For Plastics
Additives For Plastics

Author: Raymond Seymour

Publisher: Elsevier

Published: 2012-12-02

Total Pages: 288

ISBN-13: 032314151X

DOWNLOAD EBOOK

Additives for Plastics: Volume 1, State of the Art summarizes the state of the art about additives for plastics, including coupling agents for fillers and plasticizers, as well as colorants, silicas, cellulose fiber, whiskers, and microfibers. Stabilizers for weather, fungal, and heat resistance and resistance to ultraviolet radiation are also considered. This volume is comprised of 13 chapters; the first of which introduces the reader to nonreinforcing fillers such as carbon black, wood flour, alpha cellulose, calcium carbonate, and natural and synthetic silicates. The discussion then turns to synthetic and naturally occurring silicas, short cellulose fibers for reinforcing polymers, and asbestiform fillers. Whiskers and microfibers are the subject of the subsequent chapter, with emphasis on their differences and similarities, application in various plastics, and prospects. Silane and nonsilane coupling agents, nonfiller additives, plasticizers, biocides, and heat stabilizers are also examined. This volume also evaluates rutile titanium dioxide and other white pigments with regard to the opacification and coloring of plastics. This book will be of vital interest to those who are closely associated with the plastics industry as well as those who are concerned with the design, fabrication, and use of plastics.