Design related project level pavement management - Economic evaluation of alternative pavement design strategies - Reliability / - Pavement design procedures for new construction or reconstruction : Design requirements - Highway pavement structural design - Low-volume road design / - Pavement design procedures for rehabilitation of existing pavements : Rehabilitation concepts - Guides for field data collection - Rehabilitation methods other than overlay - Rehabilitation methods with overlays / - Mechanistic-empirical design procedures.
Highway agencies across the nation are moving towards implementation of the new AASHTO Mechanistic-Empirical Pavement Design Guide (MEPDG) for pavement design. The benefits of implementing the MEPDG for routine use in Ohio includes (1) achieving more cost effective and reliable pavement designs, (2) lower initial and life cycle costs to the agency, and (3) reduced highway user impact due to lane closures for maintenance and rehabilitation of pavements. Implementation of the MEPDG is a process that requires time and agency resources (staffing, training, testing facilities including equipment, and so on). A key requirement is validating the MEPDG's nationally calibrated pavement distress and smoothness prediction models when applied under Ohio conditions and performing local calibration if needed. Feasibility of using the MEPDG's national models in Ohio was investigated under this study using data from a limited number of LTPP projects located in Ohio. Results based on limited data showed inadequate goodness of fit and significant bias in a number of the MEPDG new HMA pavement and JPCP performance prediction models. Limited recalibration of these models showed promising results indicating that a full-scale recalibration effort using a more extensive database assembled from projects located throughout the state is feasible.
Introduction -- Mechanistic-Empirical Pavement Design Guide and AASHTOWare Pavement ME Design (TM) Software Overview -- Survey of Agency Pavement Design Practices -- Common Elements of Agency Implementation Plans -- Case Examples of Agency Implementation -- Conclusions.
"No. 1917 explores the development of a more accurate, cost-effective methodology for estimating vehicle miles traveled; a reality-based approach to soliciting stated preference data; possible causes of loop errors under non-forced-flow traffic conditions; and wireless magnetic sensor networks as a low-cost alternative to inductive loops for traffic measurement."--pub website.
This guide provides guidance to calibrate the Mechanistic-Empirical Pavement Design Guide (MEPDG) software to local conditions, policies, and materials. It provides the highway community with a state-of-the-practice tool for the design of new and rehabilitated pavement structures, based on mechanistic-empirical (M-E) principles. The design procedure calculates pavement responses (stresses, strains, and deflections) and uses those responses to compute incremental damage over time. The procedure empirically relates the cumulative damage to observed pavement distresses.
Bearing Capacity of Roads, Railways and Airfields includes the contributions to the 10th International Conference on the Bearing Capacity of Roads, Railways and Airfields (BCRRA 2017, 28-30 June 2017, Athens, Greece). The papers cover aspects related to materials, laboratory testing, design, construction, maintenance and management systems of transport infrastructure, and focus on roads, railways and airfields. Additional aspects that concern new materials and characterization, alternative rehabilitation techniques, technological advances as well as pavement and railway track substructure sustainability are included. The contributions discuss new concepts and innovative solutions, and are concentrated but not limited on the following topics: · Unbound aggregate materials and soil properties · Bound materials characteritics, mechanical properties and testing · Effect of traffic loading · In-situ measurements techniques and monitoring · Structural evaluation · Pavement serviceability condition · Rehabilitation and maintenance issues · Geophysical assessment · Stabilization and reinforcement · Performance modeling · Environmental challenges · Life cycle assessment and sustainability Bearing Capacity of Roads, Railways and Airfields is essential reading for academics and professionals involved or interested in transport infrastructure systems, in particular roads, railways and airfields.
For one/two-semester, undergraduate/graduate courses in Pavement Design. This up-to-date text covers both theoretical and practical aspects of pavement analysis and design. It includes some of the latest developments in the field, and some very useful computer software-developed by the author-with detailed instructions.
A comprehensive, state-of-the-art guide to pavement design and materials With innovations ranging from the advent of SuperpaveTM, the data generated by the Long Term Pavement Performance (LTPP) project, to the recent release of the Mechanistic-Empirical pavement design guide developed under NCHRP Study 1-37A, the field of pavement engineering is experiencing significant development. Pavement Design and Materials is a practical reference for both students and practicing engineers that explores all the aspects of pavement engineering, including materials, analysis, design, evaluation, and economic analysis. Historically, numerous techniques have been applied by a multitude of jurisdictions dealing with roadway pavements. This book focuses on the best-established, currently applicable techniques available. Pavement Design and Materials offers complete coverage of: The characterization of traffic input The characterization of pavement bases/subgrades and aggregates Asphalt binder and asphalt concrete characterization Portland cement and concrete characterization Analysis of flexible and rigid pavements Pavement evaluation Environmental effects on pavements The design of flexible and rigid pavements Pavement rehabilitation Economic analysis of alternative pavement designs The coverage is accompanied by suggestions for software for implementing various analytical techniques described in these chapters. These tools are easily accessible through the book’s companion Web site, which is constantly updated to ensure that the reader finds the most up-to-date software available.
