A Manual of the Principle Instruments Used in American Engineering and Surveying, Manufactured by W. and L. E. Gurley
A Manual of the Principle Instruments Used in American Engineering and Surveying, Manufactured by W. and L. E. Gurley

Author: W. & L. E. Gurley

Publisher: Theclassics.Us

Published: 2013-09

Total Pages: 90

ISBN-13: 9781230733821

DOWNLOAD EBOOK

This historic book may have numerous typos and missing text. Purchasers can usually download a free scanned copy of the original book (without typos) from the publisher. Not indexed. Not illustrated. 1908 edition. Excerpt: ...and bent close to the link, to avoid kinking. The oval rings are about one-third stronger than round ones. The handles are of brass and form part of the end links, to which they are connected by a short link and jam-nuts, by which the length of the chain is adjusted. The tallies are of brass, and have one, two, three or four notches, as they mark ten, twenty, thirty or forty links from either end. The fiftieth link is marked by a rounded tally to distinguish it from the others. In place of the four-pole chain just described, many surveyors prefer a chain two rods or thirty-three feet long, having only fifty links, which are counted by tallies from one end in a single direction. Our surveyors' chains are made of Nos. 8 and 10 refined iron wire, and of Nos. 8, 10, 12 and 15 best steel wire. Iron And Steel Steel chains are often preferred on WIRE account of their greater strength, although they are more costly than those of iron. Engineers' chains differ from surveyors' chains, in that Engineers' a unk including a ring at each end is one foot Chains long, and the wire is of steel and therefore much stronger. They are either fifty or one hundred feet long, and are furnished with swivel handles and tallies like those just described. The wire used for these chains is of steel of the first quality, Nos. 8, 10 and 12. A very light and strong chain is made of No. 12 steel Brazed Steel wire, the links and rings of which are Chains securely brazed. The wire is of a low spring-temper, and the chain, though light, is almost incapable of being broken or stretched in careful use. Our brazed steel chains have been found exceedingly desirable for all kinds of measurement, and for the use of engineers upon railroads and canals they have very generally...

A Manual of the Principle Instruments Used in American Engineering and Surveying, Manufactured by W. & L.E. Gurley
A Manual of the Principle Instruments Used in American Engineering and Surveying, Manufactured by W. & L.E. Gurley

Author: N y ) W & L E Gurley (Troy

Publisher: Andesite Press

Published: 2015-08-09

Total Pages: 482

ISBN-13: 9781297635953

DOWNLOAD EBOOK

This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work.This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work.As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.