Experimental Robotics XV is the collection of papers presented at the International Symposium on Experimental Robotics, Roppongi, Tokyo, Japan on October 3-6, 2016. 73 scientific papers were selected and presented after peer review. The papers span a broad range of sub-fields in robotics including aerial robots, mobile robots, actuation, grasping, manipulation, planning and control and human-robot interaction, but shared cutting-edge approaches and paradigms to experimental robotics. The readers will find a breadth of new directions of experimental robotics. The International Symposium on Experimental Robotics is a series of bi-annual symposia sponsored by the International Foundation of Robotics Research, whose goal is to provide a forum dedicated to experimental robotics research. Robotics has been widening its scientific scope, deepening its methodologies and expanding its applications. However, the significance of experiments remains and will remain at the center of the discipline. The ISER gatherings are a venue where scientists can gather and talk about robotics based on this central tenet.
In addition to the contributions presented at the 2018 International Symposium on Experimental Robotics (ISER 2018), this book features summaries of the discussions that were held during the event in Buenos Aires, Argentina. These summaries, authored by leading researchers and session organizers, offer important insights on the issues that drove the symposium debates. Readers will find cutting-edge experimental research results from a range of robotics domains, such as medical robotics, unmanned aerial vehicles, mobile robot navigation, mapping and localization, field robotics, robot learning, robotic manipulation, human–robot interaction, and design and prototyping. In this unique collection of the latest experimental robotics work, the common thread is the experimental testing and validation of new ideas and methodologies. The International Symposium on Experimental Robotics is a series of bi-annual symposia sponsored by the International Foundation of Robotics Research, whose goal is to provide a dedicated forum for experimental robotics research. In recent years, robotics has broadened its scientific scope, deepened its methodologies and expanded its applications. However, the significance of experiments remains at the heart of the discipline. The ISER gatherings are an essential venue where scientists can meet and have in-depth discussions on robotics based on this central tenet.
This book is the volume of the proceedings for the 17th Edition of ISER. The goal of ISER (International Symposium on Experimental Robotics) symposia is to provide a single-track forum on the current developments and new directions of experimental robotics. The series has traditionally attracted a wide readership of researchers and practitioners interested to the advances and innovations of robotics technology. The 54 contributions cover a wide range of topics in robotics and are organized in 9 chapters: aerial robots, design and prototyping, field robotics, human‒robot interaction, machine learning, mapping and localization, multi-robots, perception, planning and control. Experimental validation of algorithms, concepts, or techniques is the common thread running through this large research collection. Chapter “A New Conversion Method to Evaluate the Hazard Potential of Collaborative Robots in Free Collisions” is available open access under a Creative Commons Attribution 4.0 International License via link.springer.com.
This book addresses the topic of autonomous flying robots physically interacting with the environment under the influence of wind. It aims to make aerial robots aware of the disturbance, interaction, and faults acting on them. This requires reasoning about the external wrench (force and torque) acting on the robot and distinguishing between wind, interactions, and collisions. The book takes a model-based approach and covers a systematic approach to parameter identification for flying robots. The book aims to provide a wind speed estimate independent of the external wrench, including estimating the wind speed using motor power measurements. Aerodynamics modeling is approached in a data-driven fashion, using ground-truth measurements from a 4D wind tunnel. Finally, the book bridges the gap between trajectory tracking and interaction control, to allow physical interaction under wind influence. Theoretical results are accompanied by extensive simulation and experimental results.
This book introduces a novel model-based dexterous manipulation framework, which, thanks to its precision and versatility, significantly advances the capabilities of robotic hands compared to the previous state of the art. This is achieved by combining a novel grasp state estimation algorithm, the first to integrate information from tactile sensing, proprioception and vision, with an impedance-based in-hand object controller, which enables leading manipulation capabilities, including finger gaiting. The developed concept is implemented on one of the most advanced robotic manipulators, the DLR humanoid robot David, and evaluated in a range of challenging real-world manipulation scenarios and tasks. This book greatly benefits researchers in the field of robotics that study robotic hands and dexterous manipulation topics, as well as developers and engineers working on industrial automation applications involving grippers and robotic manipulators.
This book presents the latest advances and research achievements in the fields of autonomous robots and intelligent systems, presented at the IAS-16 conference, conducted virtually in Singapore, from 22 to 25 June 2021. IAS is a common platform for an exchange and sharing of ideas among the international scientific research and technical community on some of the main trends of robotics and autonomous systems: navigation, machine learning, computer vision, control, and robot design—as well as a wide range of applications. IAS-16 reflects the rise of machine learning and deep learning developments in the robotics field, as employed in a variety of applications and systems. All contributions were selected using a rigorous peer-reviewed process to ensure their scientific quality. Despite the challenge of organising a conference during a pandemic, the IAS biennial conference remains an essential venue for the robotics and autonomous systems community ever since its inception in 1986. Chapters 46 of this book is available open access under a CC BY 4.0 license at link.springer.com
The 4-volume set LNAI 13455 - 13458 constitutes the proceedings of the 15th International Conference on Intelligent Robotics and Applications, ICIRA 2022, which took place in Harbin China, during August 2022. The 284 papers included in these proceedings were carefully reviewed and selected from 442 submissions. They were organized in topical sections as follows: Robotics, Mechatronics, Applications, Robotic Machining, Medical Engineering, Soft and Hybrid Robots, Human-robot Collaboration, Machine Intelligence, and Human Robot Interaction.
ISRR, the "International Symposium on Robotics Research", is one of robotics pioneering Symposia, which has established over the past two decades some of the field's most fundamental and lasting contributions. This book presents the results of the eighteenth edition of "Robotics Research" ISRR17, offering a collection of a broad range of topics in robotics. This symposium took place in Puerto Varas, Chile from December 11th to December 14th, 2017. The content of the contributions provides a wide coverage of the current state of robotics research, the advances and challenges in its theoretical foundation and technology basis, and the developments in its traditional and new emerging areas of applications. The diversity, novelty, and span of the work unfolding in these areas reveal the field's increased maturity and expanded scope and define the state of the art of robotics and its future direction.
The era of the fourth industrial revolution has fundamentally transformed the manufacturing landscape. Products are getting increasingly complex and customers expect a higher level of customization and quality. Manufacturing in the Era of 4th Industrial Revolution explores three technologies that are the building blocks of the next-generation advanced manufacturing.The first technology covered in Volume 1 is Additive Manufacturing (AM). AM has emerged as a very popular manufacturing process. The most common form of AM is referred to as 'three-dimensional (3D) printing'. Overall, the revolution of additive manufacturing has led to many opportunities in fabricating complex, customized, and novel products. As the number of printable materials increases and AM processes evolve, manufacturing capabilities for future engineering systems will expand rapidly, resulting in a completely new paradigm for solving a myriad of global problems.The second technology is industrial robots, which is covered in Volume 2 on Robotics. Traditionally, industrial robots have been used on mass production lines, where the same manufacturing operation is repeated many times. Recent advances in human-safe industrial robots present an opportunity for creating hybrid work cells, where humans and robots can collaborate in close physical proximities. This Cobots, or collaborative robots, has opened up to opportunity for humans and robots to work more closely together. Recent advances in artificial intelligence are striving to make industrial robots more agile, with the ability to adapt to changing environments and tasks. Additionally, recent advances in force and tactile sensing enable robots to be used in complex manufacturing tasks. These new capabilities are expanding the role of robotics in manufacturing operations and leading to significant growth in the industrial robotics area.The third technology covered in Volume 3 is augmented and virtual reality. Augmented and virtual reality (AR/VR) technologies are being leveraged by the manufacturing community to improve operations in a wide variety of ways. Traditional applications have included operator training and design visualization, with more recent applications including interactive design and manufacturing planning, human and robot interactions, ergonomic analysis, information and knowledge capture, and manufacturing simulation. The advent of low-cost solutions in these areas is accepted to accelerate the rate of adoption of these technologies in the manufacturing and related sectors.Consisting of chapters by leading experts in the world, Manufacturing in the Era of 4th Industrial Revolution provides a reference set for supporting graduate programs in the advanced manufacturing area.
This book outlines the effects that technology-induced change will have on sport within the next five to ten years, and provides food for thought concerning what lies further ahead. Presented as a collection of essays, the authors are leading academics from renowned institutions such as Massachusetts Institute of Technology, Queensland University of Technology, and the University of Cambridge, and practitioners with extensive technological expertise. In their essays, the authors examine the impacts of emerging technologies like artificial intelligence, the Internet of Things, and robotics on sports and assess how they will change sport itself, consumer behavior, and existing business models. The book will help athletes, entrepreneurs, and innovators working in the sports industry to spot trendsetting technologies, gain deeper insights into how they will affect their activities, and identify the most effective responses to stay ahead of the competition both on and off the pitch.
