Code of Federal Regulations
Code of Federal Regulations

Author:

Publisher:

Published: 1980

Total Pages: 610

ISBN-13:

DOWNLOAD EBOOK

Special edition of the Federal Register, containing a codification of documents of general applicability and future effect ... with ancillaries.

Nonmetallic Air Brake System Tubing
Nonmetallic Air Brake System Tubing

Author: Air Brake Tubing and Tube Ftg Committee

Publisher:

Published: 1997

Total Pages: 0

ISBN-13:

DOWNLOAD EBOOK

This SAE Standard covers the minimum requirements for nonmetallic tubing as manufactured for use in air brake systems. Nonreinforced products are designated type A and reinforced products type B. It is not intended to cover tubing for any portion of the system which operates below -40 degree C (-40 degrees F), above +93 degrees C (+200 degrees F), above a maximum working gage pressure of 1030 kPa (150 psi), or in an area subject to attack by battery acid. This tubing is intended for use in the brake system for connections which maintain a basically fixed relationship between components during vehicle operation. Coiled tube assemblies required for those installations where flexing occurs are covered by this document and SAE J1131 to the extent of setting minimum requirements on the essentially straight tube and tube fitting connections which are used in the construction of such assemblies.

Metric Nonmetallic Air Brake System Tubing
Metric Nonmetallic Air Brake System Tubing

Author: Air Brake Tubing and Tube Ftg Committee

Publisher:

Published: 2004

Total Pages: 0

ISBN-13:

DOWNLOAD EBOOK

This SAE Standard covers the minimum requirements for metric sizes of nonmetallic tubing as manufactured for use in air brake systems. Nonreinforced products are designated type A and reinforced products type B. It is not intended to cover tubing for any portion of the system that operates below -40 °C (-40 °F), above +93 °C (+200 °F), above a maximum working gage pressure of 1.0 MPa (150 psi), or in an area subject to attack by battery acid. This tubing is intended for use in the brake system for connections that maintain a basically fixed relationship between components during vehicle operation. Coiled tube assemblies required for those installations where flexing occurs are covered by this standard and SAE J1131 to the extent of setting minimum requirements on the essentially straight tube and tube fitting connections, which are used in the construction of such assemblies.