Safety of Uranium Fuel Fabrication Facilities: Specific Safety Guide
Safety of Uranium Fuel Fabrication Facilities: Specific Safety Guide

Author: International Atomic Energy Agency

Publisher:

Published: 2010

Total Pages: 0

ISBN-13: 9781523129980

DOWNLOAD EBOOK

This Safety Guide supplements the Safety Requirements publication Safety of Fuel Cycle Facilities, and addresses all the stages in the life cycle of uranium fuel fabrication facilities (UFFFs), with emphasis being placed on design and operation. It describes the actions, conditions and procedures for meeting safety requirements and deals specifically with the handling, processing and storage of low enriched uranium that has a 235U concentration of no more than 6%, derived from natural, highly enriched or reprocessed uranium. The publication is intended to be of use to designers, operating organizations and regulators to ensure the safety of UFFFs.Contents: 1. Introduction; 2. General safety recommendations; 3. Site evaluation; 4. Design; 5. Construction; 6. Commissioning; 7. Operation; 8. Decommissioning; Annexes.

Safety of Uranium Fuel Fabrication Facilities: IAEA Safety Standards Series No. Ssg-6 (Rev. 1)
Safety of Uranium Fuel Fabrication Facilities: IAEA Safety Standards Series No. Ssg-6 (Rev. 1)

Author: International Atomic Energy Agency

Publisher:

Published: 2023-06-30

Total Pages: 0

ISBN-13: 9789201276223

DOWNLOAD EBOOK

This Safety Guide provides specific recommendations on the safety of uranium fuel fabrication facilities and describes the actions, conditions and procedures for meeting safety requirements. It deals specifically with the handling, processing and storage of low enriched uranium that has a uranium 235 concentration of no more than 6%, derived from natural, highly enriched or reprocessed uranium. This publication is a revision by amendment of IAEA Safety Standards Series No. SSG-6. It addresses the new safety requirements established by IAEA Safety Standards SSR-4, Safety of Nuclear Fuel Cycle Facilities, which incorporates the lessons learned from the accident at the Fukushima Daiichi nuclear power plant.

Safety of Uranium Fuel Fabrication Facilities
Safety of Uranium Fuel Fabrication Facilities

Author: International Atomic Energy Agency

Publisher:

Published: 2010

Total Pages: 58

ISBN-13: 9789201046093

DOWNLOAD EBOOK

This Safety Guide supplements the Safety Requirements publication Safety of Fuel Cycle Facilities, and addresses all the stages in the life cycle of uranium fuel fabrication facilities (UFFFs), with emphasis being placed on design and operation. It describes the actions, conditions and procedures for meeting safety requirements and deals specifically with the handling, processing and storage of low enriched uranium that has a 235U concentration of no more than 6%, derived from natural, highly enriched or reprocessed uranium. The publication is intended to be of use to designers, operating organizations and regulators to ensure the safety of UFFFs.

Safety of Uranium Fuel Fabrication Facilities Specific Safety Guide
Safety of Uranium Fuel Fabrication Facilities Specific Safety Guide

Author: IAEA (Corporate Author)

Publisher:

Published: 2010

Total Pages: 80

ISBN-13:

DOWNLOAD EBOOK

This Safety Guide supplements the Safety Requirements publication Safety of Fuel Cycle Facilities, and addresses all the stages in the life cycle of uranium fuel fabrication facilities (UFFFs), with emphasis being placed on design and operation. It describes the actions, conditions and procedures for meeting safety requirements and deals specifically with the handling, processing and storage of low enriched uranium that has a 235U concentration of no more than 6%, derived from natural, highly enriched or reprocessed uranium. The publication is intended to be of use to designers, operating orga.

Safety of Nuclear Fuel Cycle Research and Development Facilities
Safety of Nuclear Fuel Cycle Research and Development Facilities

Author: International Atomic Energy Agency

Publisher:

Published: 2017

Total Pages: 0

ISBN-13: 9789201031167

DOWNLOAD EBOOK

It covers the lifetime of these facilities from site selection through to decommissioning, concentrating on design and operation. It applies to laboratories, pilot workshops and experimental facilities that store, handle and process uranium, plutonium and other transuranics, fission products and activated materials in significant quantities. Such facilities may be involved in the study of chemical, metallurgical or radiological properties of specific radioactive materials such as prototype nuclear fuels (before and after reactor irradiation) or nuclear material or radioactive waste arising from experimental processes. This Safety Guide also applies to research and development for processes and equipment that are envisaged for later use on an industrial scale for the nuclear fuel cycle (e.g. pilot workshops for active waste conditioning).

Safety of Uranium and Plutonium Mixed Oxide Fuel Fabrication Facilities: Specific Safety Guide
Safety of Uranium and Plutonium Mixed Oxide Fuel Fabrication Facilities: Specific Safety Guide

Author: International Atomic Energy Agency

Publisher:

Published: 2010

Total Pages: 0

ISBN-13: 9781523129973

DOWNLOAD EBOOK

This Safety Guide supplements the Safety Requirements publication Safety of Fuel Cycle Facilities, and addresses all the stages in the life cycle of MOX fuel fabrication facilities (MFFFs), with emphasis placed on design and operation. It describes the actions, conditions and procedures for meeting safety requirements and deals specifically with the handling, processing and storage of plutonium oxide, depleted, natural or reprocessed uranium oxide, mixed oxide manufactured from the above to be used as a feed material to form MOX fuel rods and assemblies for export and subsequent use in water reactors and fast breeder reactors. The publication is intended to be of use to designers, operating organizations and regulators to ensure the safety of MOX fuel fabrication facilities.Contents: 1. Introduction; 2. General safety recommendations; 3. Site evaluation; 4. Design; 5. Construction; 6. Commissioning; 7. Operation; 8. Decommissioning; Annexes.